Connect these mounts to an air cylinder to create linear, pivot, or arc movements. These mounts are compatible with ISO tie rod air cylinders.

Front or rear flanges are for straightforward, back-and-forth movements, such as opening a sliding door. These flanges mount to either end of your cylinder.

Pivot brackets and clevis brackets work together to allow the rear portion of cylinders to pivot back and forth. Use either with a rod clevis to create arcing movements, such as opening a swinging door. Rod clevises allow the front portion of cylinders to pivot.

Stainless steel mounts are more corrosion resistant than steel and aluminum for use in wet or damp environments.

For technical drawings and 3-D models, click on a part number.

Our most corrosion-resistant air cylinders, these cylinders are made of stainless steel for use in wet environments. Rods secure the end caps and shield the barrel from impact. These air cylinders are double acting, meaning they push and pull loads with nearly equal force. They have an ISO industry-standard footprint to match common mounting patterns, so they’re easy to switch in and out across equipment.

The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Ensure the correct cushioning, even with changing loads. These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed. They have an extruded-aluminum body so there's no open spaces for debris to collect. All have a magnetic piston so you can use them with sensors (sold separately) to activate relays and controllers.

For technical drawings and 3-D models, click on a part number.

Halt actuation at a moment’s notice—these air cylinders have an end lock that acts as an emergency stop. If there's a sudden loss of air pressure, the end lock engages to safely hold the load. You can also set them to stop anywhere along the stroke length as a simpler alternative to electric actuators. Rods along the barrel secure the end caps and shield the barrel from impact. These air cylinders are double acting, meaning they extend and retract with nearly equal force. All have adjustable air cushions that absorb piston impact to minimize wear and noise.

The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides. Their ISO footprint makes it easy to change out an old air cylinder. To mount them directly to equipment or add on attachments, use the threaded through holes. These cylinders are double acting, so they push and pull loads with equal force.

The piston is magnetic, so you can use these cylinders with sensors (not included) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.