Instead of attaching your round body air cylinder directly to equipment, add a mount to best suit your application.

Foot brackets prevent cylinders from moving back and forth.

Pivot brackets for universal-mount air cylinders allow the rear portion of cylinders to pivot back and forth.

Rod clevises thread to cylinder shafts to allow swiveling.

Rod ends are internally threaded. They have an eyelet and ball that swivel to support angular misalignment and allow for pivoting.

For technical drawings and 3-D models, click on a part number.

Clamp items in place to complete a step in your manufacturing process. These air cylinders rotate while actuating, so you can position, assemble, and inspect items. The body of these air cylinders has threaded through-holes on the face and sides, so you can mount them directly to equipment and thread accessories on. The rod is internally threaded, allowing you to attach an arm as needed for your application.

The piston is magnetic, so you can use these slides with sensors (not included) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Push and pull light duty loads in areas constantly exposed to dust and powders as fine as flour. With lubricant retainers around their piston to block particles, these cylinders last up to four times longer in dusty environments than standard air cylinders. They’re often used in ceramics and paper manufacturing facilities. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction. They have a round body—the most common style of air cylinder—making them more compact and better suited for tight spaces than cylinders with external tie rods. All are universal mount, so they have threads on both ends. The back end has a pivot bushing, which allows for more mounting options than nose-mount cylinders.

These air cylinders have a magnetic piston that can activate relays and controllers when used with a sensor. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping. A rod seal wipes grease particles off the rod as it moves back and forth. The seal is polyurethane, which is slippery, so it wears more slowly than standard seals, releasing fewer particles. These cylinders also have tightly crimped end caps to stop air from leaking.

With no tie rods on the outside, these round-body cylinders fit in tight spaces. They have an ISO industry-standard footprint that fits common mounting patterns for easy interchangeability. As universal-mount cylinders, they have mounting threads on both ends, giving you more mounting options than nose-mount cylinders. You can also pivot mount them with the through-hole on the back. They’re double acting, meaning they push and pull loads with equal force.

The piston is magnetic, so you can use these cylinders with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides. Their ISO footprint makes it easy to change out an old air cylinder. To mount them directly to equipment or add on attachments, use the threaded through holes. These cylinders are double acting, so they push and pull loads with equal force.

The piston is magnetic, so you can use these cylinders with sensors (not included) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing. Use the threaded through-holes on the face to connect to equipment, or mount them with attachments (not included). Hook these cylinders into your compressed air line to push and pull loads. They’re double-acting, so they operate at full force in either direction. The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor (not included). As the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action you want to trigger.

Cylinders that are rated for use in Fed. Std. Class 1,000 and ISO Class 6 clean rooms have a low-friction polyurethane seal that wears slower and creates fewer particles than standard seals. As the rod moves, the seal wipes its surface clean of grease particles. The end caps are tightly crimped to stop air from leaking out. These cylinders have an ISO industry-standard footprint that fits common mounting patterns.

For technical drawings and 3-D models, click on a part number.

Combine the lifting power of a vacuum with the actuation of an air cylinder to automate processes such as pick and place. With a hollow rod that’s threaded to connect to a vacuum pad, these cylinders let you move items with suction. They’re double acting, meaning they pull loads as well as push them, and do so with equal force. Mount them directly to equipment or with attachments (not included) using the threaded through-holes on the face and sides of the body.

The piston is magnetic, so you can use these cylinders with sensors (not included) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

With an integrated valve and multiple mounting options, these air cylinders install quickly, right where you need them, to push and pull light loads. In addition to saving you setup time, the built-in valve reduces the number of air connection points in your system to cut down on air loss. They have threaded holes on the face and sides for mounting either directly to equipment or using attachments. These air cylinders are double acting, meaning they extend and retract with nearly equal force.

The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders. Air slides have two guide rods parallel to the piston that keep the head from twisting as it extends and retracts.

The magnetic piston inside these slides can activate relays and controllers when used with a sensor (not included). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment. A safety end lock engages when air pressure is lost, stopping loads from falling or slamming against the air slide. The air slide guide rods keep the head from twisting as it extends and retracts for steadier motion than air cylinders. These air slides also have a larger mounting surface area compared to air cylinders, so you can mount or push larger items at the end of the slide.

The piston is magnetic, so it can activate relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment. These air slides have a port that connects to a vacuum or exhaust system to remove particles created by friction inside the slide before they contaminate your space. The guide rods keep the head from twisting as it extends and retracts for steadier motion than air cylinders. These air slides also have a larger mounting surface area compared to air cylinders, so you can mount or push larger items at the end of the slide.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Push one object while pulling another—when one head on these air slides extends, the other retracts. Often used in pick-and-place systems across two surfaces, such as parallel conveyors, they can take the place of two standard air slides. With guide rods that keep the heads from twisting, they move more steadily than air cylinders. They also have a larger mounting area.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.