We will reply to your message within an hour.
Select a cylinder, prolong its life by reducing wear, and trigger automated processes with sensors.
Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.
Also known as pancake cylinders, these deliver as much force as other cylinders, but with a shorter stroke to function in small spaces.
Built to withstand hard knocks, these cylinders have a thick barrel wall for more durability than standard air cylinders.
These cylinders thread directly into your equipment, taking minimal space.
Able to resist corrosive solutions and chemical environments, these cylinders withstand washdown conditions.
Unlike other air cylinders that push and pull one object, these double-ended cylinders push one object while pulling another.
Keep tools from twisting while moving them back and forth.
Move loads between three positions instead of two.
Clamp items in place to complete a step in your manufacturing process.
Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.
Get the power and stroke of other tie rod cylinders in less than half the space.
Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.
Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.
An extruded-aluminum body means these cylinders have no open spaces for debris to collect.
Cylinders have two parallel piston rods that prevent twisting as they extend and retract.
These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.
Halt actuation at a moment’s notice—these air cylinders have an end lock that acts as an emergency stop. If there's a sudden loss of air pressure, the end lock engages to safely hold the load.
Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.
Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.
For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides.
Combine the lifting power of a vacuum with the actuation of an air cylinder to automate processes such as pick and place. With a hollow rod that’s threaded to connect to a vacuum pad, these cylinders let you move items with suction.
With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.
Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting.
Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders.
Move grippers, printing heads, and other devices in areas constantly exposed to dust and powders as fine as flour.
Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment.
Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment.
Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.
For flexibility with your setup, mount equipment on top or in front of these air slides. Mount on top to reduce the space you need to move a full stroke length.
Move optical equipment and other electronics sensitive to dust and fine particles from a range of mounting positions.
Push one object while pulling another—when one head on these air slides extends, the other retracts.
Control the movement of loads on your conveyor—the rod on these air cylinders extends to stop loads and retracts to let them pass.
Space out parts on your conveyor line or vibratory feeder. Also known as escapements, these air cylinders have at least one finger that extends to hold parts and then retracts to release them.
Use rotary motion to drive devices in tight spaces.
Turn the adjustment bolt on these actuators to set the rotation you need for your application.
Designed to turn heavy loads, these rotary air actuators have rack-and-pinion gears that provide high torque output.
When you want to control the angle of your shaft’s rotation and are tight on space, choose these rotary air actuators.
These clamps have mounting holes on the bottom.
Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.
Use for repetitive clamping and in production environments or hard-to-reach locations.
Attach these actuators to manual ball valves, butterfly valves, and plug valves with an ISO 5211 hole pattern to automatically start and stop flow with compressed air.