We will reply to your message within an hour.
These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.
Prevent unauthorized use—these switches require coded magnets to actuate. They cannot be bypassed using ordinary magnets.
Wire contacts to an alarm system to alert when doors or windows are opened.
Mounted to your circuit board, these switches trigger when magnetic components get near, and reset as they move away.
Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.
Unlike other air cylinders that push and pull one object, these double-ended cylinders push one object while pulling another.
Clamp items in place to complete a step in your manufacturing process.
Keep tools from twisting while moving them back and forth.
Move loads between three positions instead of two.
Able to resist corrosive solutions and chemical environments, these cylinders withstand washdown conditions.
Built to withstand hard knocks, these cylinders have a thick barrel wall for more durability than standard air cylinders.
Threaded through-holes in each corner allow you to mount these cylinders directly to equipment or mount with attachments.
Combine the lifting power of a vacuum with the actuation of an air cylinder to automate processes such as pick and place. With a hollow rod that’s threaded to connect to a vacuum pad, these cylinders let you move items with suction.
Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.
For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides.
Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns.
Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.
Cylinders have two parallel piston rods that prevent twisting as they extend and retract.
These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.
Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.
Get the power and stroke of other tie rod cylinders in less than half the space.
An extruded-aluminum body means these cylinders have no open spaces for debris to collect.
Halt actuation at a moment’s notice—these air cylinders have an end lock that acts as an emergency stop. If there's a sudden loss of air pressure, the end lock engages to safely hold the load.
Push one object while pulling another—when one head on these air slides extends, the other retracts.
Move grippers, printing heads, and other devices in areas constantly exposed to dust and powders as fine as flour.
Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment.
Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting.
Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment.
For flexibility with your setup, mount equipment on top or in front of these air slides. Mount on top to reduce the space you need to move a full stroke length.
Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.
Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders.
With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves.
Move optical equipment and other electronics sensitive to dust and fine particles from a range of mounting positions.
Control the movement of loads on your conveyor—the rod on these air cylinders extends to stop loads and retracts to let them pass.