These nozzles are made of FDA-listed materials.

At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.

Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Control consumption and noise by adjusting the airflow.

The extra length allows access into hard-to-reach areas.

These needle-style nozzles force air to a precise pinpoint.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Choose a base, hose, and nozzle for a custom setup.

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

The extra length lets you access hard-to-reach areas.

These guns include a rubber tip that won't damage your workpiece.

Increase your reach with the telescoping nozzle.

Maximize comfort and minimize strain with these lightweight guns.

The extra length lets you access hard-to-reach areas.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Sets include a focused nozzle for concentrated airflow, a flat-tip nozzle for heating wide surfaces, and a deflecting nozzle that protects adjacent surfaces from heating.

Concentrate a heat gun's airflow.