We will reply to your message within an hour.
More
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Touch up scratches and wear on your enclosure with paint that matches its color.
Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Match the manufacturers’ color of your lift, jack, or motor to cover scratches and wear. This paint resists oil, gas, heat, and sunlight for use in demanding environments.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Create a washable writing surface.
Make items stand out under emergency lighting or in low-light environments.
Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side.
Turn any surface into a dry-erase board.
Mark traffic lanes, parking lots, and factory floors.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
This paint adheres to most types of plastic without sanding or priming.
Restore existing water- and smoke-stained ceiling tiles to their original appearance.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material.
Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.
This water-based paint sprays in an inverted position and will not harm grass or other plant life.
This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.
Put a temporary dull finish on glossy surfaces. Wipe to remove.
Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.
Protect sensitive electronic equipment from sparks, shorts, and sudden discharges. These acrylic-based coatings contain low-conductivity pigments to dissipate electric charge and prevent static buildup on your equipment.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.
These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.
Tough and long-lasting, these flexible coatings protect against rust and corrosion.
Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.
Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.
Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.
Protect sensitive electronic parts, enclosures, and prototypes from electromagnetic interference (EMI) and radio frequency interference (RFI) with these coatings.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Repel spills and block stains without changing the look of fabric or upholstery.
Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings.
These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.
These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.
Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.
Strip paint, varnish, and epoxy, penetrating several layers at once.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.
Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.
Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.
Fill cracks with these coatings to stop leaks and deaden sound.
Use compressed air to quickly and thoroughly mix paint and coatings.
Add ink to rollers and pads before stenciling.
Create a slippery surface that keeps sealant from smearing or widening when smoothed.
Prevent slippage on flat, round, and V-belts and eliminate squeaking. These coatings also extend belt and pulley life by reducing tension and vibration.
Create a high-contrast background for magnetic particles to make flaws easier to spot during inspections.