Adjustable-Angle V-Blocks
Use this block to hold workpieces at precise angles. Adjust the block to the desired angle, then tighten the set screw on the bottom of the block to lock it in place.
Tolerance | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Workpiece Dia. | Lg. | Wd. | Ht. | Accuracy | Range of Motion | V Angle | V Dp. | V Wd. | Squareness | Parallel | Material | Machinable | Container Type | Each | |
| 1 3/4" | 1 3/4" | 3 3/4" | 2" | ±0.003° | 0°-90° | 90° | 1 5/32" | 1 1/8" | 0.0002" | 0.0002" | Steel | No | Wood Case | 0000000 | 0000000 |
Economy V-Blocks
Hold and support round workpieces.
For technical drawings and 3-D models, click on a part number.
Tolerance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Workpiece Dia. | Lg. | Wd. | Ht. | V Angle | V Dp. | V Wd. | Squareness | Parallel | Material | Machinable | Pair | |
Matched Pair | ||||||||||||
| 2 3/8" | 1 1/4" | 3" | 2 3/8" | 90° | 13/16" | 1 3/4" | 0.0012" | 0.0012" | Iron | Yes | 000000 | 000000 |
| 2 15/16" | 1 5/8" | 4" | 2 5/8" | 90° | 1" | 2 3/16" | 0.0012" | 0.0012" | Iron | Yes | 000000 | 00000 |
| 3 1/8" | 2" | 5" | 3 3/16" | 90° | 1 1/8" | 2 3/8" | 0.0016" | 0.0016" | Iron | Yes | 000000 | 000000 |
| 4 5/16" | 2 1/2" | 6" | 3 1/2" | 90° | 1 1/2" | 3 3/16" | 0.002" | 0.002" | Iron | Yes | 000000 | 000000 |
| 4 15/16" | 2" | 6" | 4" | 90° | 2 1/8" | 4 3/16" | 0.002" | 0.002" | Iron | Yes | 0000000 | 000000 |
| 4 15/16" | 4" | 7" | 5 1/2" | 90° | 1 11/16" | 3 5/8" | 0.002" | 0.002" | Iron | Yes | 0000000 | 000000 |
| 6 5/16" | 2 1/2" | 7 1/4" | 5 1/4" | 90° | 2 5/8" | 5 1/8" | 0.0024" | 0.0024" | Iron | Yes | 000000 | 000000 |
| 7 7/8" | 2 7/8" | 8 7/8" | 6 1/2" | 90° | 3 7/16" | 6 11/16" | 0.0024" | 0.0024" | Iron | Yes | 000000 | 000000 |
Machinable V-Blocks
Easier to machine than hardened steel, these blocks can be customized to fit a workpiece. Mount them to a work surface using the side slots and setup clamps.
V-blocks with clamp have a built-in clamp for securing workpieces.
For technical drawings and 3-D models, click on a part number.
Tolerance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Workpiece Dia. | Lg. | Wd. | Ht. | V Angle | V Dp. | V Wd. | Squareness | Parallel | Mounting Slot Ht. | Material | Each | |
Standard | ||||||||||||
| 1 5/8" | 2 1/2" | 2 1/2" | 2" | 90° | 3/4" | 1 1/2" | 0.0002" | 0.0002" | 3/8" | Steel | 0000000 | 0000000 |
| 2 7/8" | 3" | 4" | 3" | 90° | 1 3/16" | 2 5/16" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 000000 |
| 3 3/4" | 3" | 5" | 3" | 90° | 1 5/8" | 3 1/4" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 000000 |
| 4 3/8" | 6" | 6" | 4" | 90° | 2" | 4" | 0.0003" | 0.0003" | 5/8" | Steel | 0000000 | 000000 |
With Clamp | ||||||||||||
| 1 5/8" | 2 1/2" | 2 1/2" | 2" | 90° | 3/4" | 1 1/2" | 0.0002" | 0.0002" | 3/8" | Steel | 0000000 | 000000 |
| 2 7/8" | 3" | 4" | 3" | 90° | 1 3/16" | 2 5/16" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 000000 |
| 3 3/4" | 3" | 5" | 3" | 90° | 1 5/8" | 3 1/4" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 000000 |
| 4 3/8" | 6" | 6" | 4" | 90° | 2" | 4" | 0.0003" | 0.0003" | 5/8" | Steel | 0000000 | 00000000 |
Tolerance | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Workpiece Dia. | Lg. | Wd. | Ht. | V Angle | V Dp. | V Wd. | Squareness | Parallel | Mounting Slot Ht. | Material | Pair | |
Standard | ||||||||||||
| 1 5/8" | 2 1/2" | 2 1/2" | 2" | 90° | 3/4" | 1 1/2" | 0.0002" | 0.0002" | 3/8" | Steel | 0000000 | 0000000 |
| 2 7/8" | 3" | 4" | 3" | 90° | 1 3/16" | 2 5/16" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 000000 |
| 3 3/4" | 3" | 5" | 3" | 90° | 1 5/8" | 3 1/4" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 00000000 |
| 4 3/8" | 6" | 6" | 4" | 90° | 2" | 4" | 0.0003" | 0.0003" | 5/8" | Steel | 0000000 | 00000000 |
With Clamp | ||||||||||||
| 1 5/8" | 2 1/2" | 2 1/2" | 2" | 90° | 3/4" | 1 1/2" | 0.0002" | 0.0002" | 3/8" | Steel | 0000000 | 000000 |
| 2 7/8" | 3" | 4" | 3" | 90° | 1 3/16" | 2 5/16" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 00000000 |
| 3 3/4" | 3" | 5" | 3" | 90° | 1 5/8" | 3 1/4" | 0.0002" | 0.0002" | 5/8" | Steel | 0000000 | 00000000 |
| 4 3/8" | 6" | 6" | 4" | 90° | 2" | 4" | 0.0003" | 0.0003" | 5/8" | Steel | 0000000 | 00000000 |
Magnetic V-Blocks
Magnetic surfaces on the bottom, back, and one V face of these blocks eliminate the need for mounting clamps and bolts. Turn the lever to switch the magnetic force on and off.
For technical drawings and 3-D models, click on a part number.
Fixturing Tables
Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.
For technical drawings and 3-D models, click on a part number.
V-blocks support round material and raise it off the table. Pivoting V-blocks conform to the shape of your workpiece, so they're good for holding round workpieces of different diameters.