About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
Adjustable Handles
Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.
For technical drawings and 3-D models, click on a part number.
Threaded-stud handles mount into a threaded hole.
Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.
Zinc handles have good corrosion resistance.
Stainless steel studs are more corrosion resistant than steel studs.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Stud Lg. | Handle Lg. | Projection | Hub Projection | Temp. Range, °F | Choose a Color | Each | |
Steel Stud | ||||||||
Nylon Plastic | ||||||||
10-32 | 5/8" | 1 3/4" | 1 3/8" | 15/16" | -20° to 230° | 0000000 | 00000 | |
10-32 | 1 1/4" | 1 3/4" | 1 3/8" | 15/16" | -20° to 230° | 0000000 | 0000 | |
Powder-Coated Zinc | ||||||||
10-32 | 9/16" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 5/8" | 1 5/8" | 1 5/16" | 15/16" | __ | 00000000 | 0000 | |
10-32 | 13/16" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 1" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 1 1/4" | 1 5/8" | 1 5/16" | 15/16" | __ | 00000000 | 0000 | |
303 Stainless Steel Stud | ||||||||
Nylon Plastic | ||||||||
10-32 | 5/8" | 1 3/4" | 1 3/8" | 15/16" | -20° to 230° | 0000000 | 00000 | |
10-32 | 1 1/4" | 1 3/4" | 1 3/8" | 15/16" | -20° to 230° | 0000000 | 00000 | |
Powder-Coated Zinc | ||||||||
10-32 | 9/16" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 5/8" | 1 5/8" | 1 5/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 13/16" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 1" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
10-32 | 1 1/4" | 1 5/8" | 1 5/16" | 15/16" | __ | 00000000 | 00000 |
Threaded-hole handles install on a threaded stud.
Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.
Zinc handles have good corrosion resistance.
Stainless steel inserts are more corrosion resistant than black-oxide steel inserts.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Dp. | Handle Lg. | Projection | Hub Projection | Temp. Range, °F | Choose a Color | Each | |
Black-Oxide Steel Insert | ||||||||
Nylon Plastic | ||||||||
10-32 | 5/16" | 1 3/4" | 1 3/8" | 15/16" | -20° to 230° | 0000000 | 00000 | |
Powder-Coated Zinc | ||||||||
10-32 | 5/16" | 1 5/8" | 1 5/16" | 15/16" | __ | 00000000 | 0000 | |
10-32 | 3/8" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 | |
303 Stainless Steel Insert | ||||||||
Nylon Plastic | ||||||||
10-32 | 5/16" | 1 3/4" | 1 3/8" | 15/16" | -20° to 230° | 0000000 | 0000 | |
Powder-Coated Zinc | ||||||||
10-32 | 5/16" | 1 5/8" | 1 5/16" | 15/16" | __ | 000000000 | 00000 | |
10-32 | 3/8" | 1 3/16" | 1 3/16" | 15/16" | __ | 00000000 | 00000 |
Threaded-stud handles mount into a threaded hole.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Threaded-hole handles install on a threaded stud.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Thread | |||||||
---|---|---|---|---|---|---|---|
Size | Dp. | Handle Lg. | Projection | Hub Projection | Insert Material | Each | |
303 Stainless Steel | |||||||
10-32 | 3/8" | 1 9/16" | 1 1/4" | 15/16" | 303 Stainless Steel | 0000000 | 000000 |
Threaded-stud handles mount into a threaded hole.
Zinc handles have good corrosion resistance.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Thread | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Stud Lg. | Handle Lg. | Projection | Hub Projection | Stud Material | Color | Each | |
Powder-Coated Zinc | ||||||||
10-32 | 9/16" | 1 9/16" | 1 5/16" | 15/16" | Steel | Black | 0000000 | 00000 |
10-32 | 3/4" | 1 9/16" | 1 5/16" | 15/16" | Steel | Black | 0000000 | 0000 |
10-32 | 1 3/16" | 1 9/16" | 1 5/16" | 15/16" | Steel | Black | 0000000 | 0000 |
303 Stainless Steel | ||||||||
10-32 | 9/16" | 1 9/16" | 1 5/16" | 15/16" | 303 Stainless Steel | __ | 0000000 | 00000 |
10-32 | 3/4" | 1 9/16" | 1 5/16" | 15/16" | 303 Stainless Steel | __ | 0000000 | 00000 |
10-32 | 1 3/16" | 1 9/16" | 1 5/16" | 15/16" | 303 Stainless Steel | __ | 0000000 | 00000 |
Threaded-hole handles install on a threaded stud.
Zinc handles have good corrosion resistance.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Low-Profile Adjustable Handles
Choose these handles when vertical space is limited. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely. Release it to engage and tighten.
Zinc handles have good corrosion resistance.
Threaded-stud handles mount into a threaded hole.
For technical drawings and 3-D models, click on a part number.
Safety Adjustable Handles
Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles. Made of plastic, they all resist oil, grease, and solvents.
Threaded-stud handles mount into a threaded hole.
Threaded-hole handles install on a threaded stud.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | Stud Lg. | Handle Lg. | Projection | Hub Projection | Stud Material | Insert Material | Temp. Range, °F | Each | |
Threaded Stud | ||||||||||
Black Nylon Plastic | ||||||||||
10-32 | __ | 3/8" | 1 5/8" | 1 3/8" | 1 1/16" | Zinc-Plated Steel | __ | -50° to 200° | 0000000 | 00000 |
10-32 | __ | 13/16" | 1 5/8" | 1 3/8" | 1 1/16" | Zinc-Plated Steel | __ | -50° to 200° | 00000000 | 0000 |
Threaded Hole | ||||||||||
Black Nylon Plastic | ||||||||||
10-32 | 3/8" | __ | 1 5/8" | 1 3/8" | 1 1/16" | __ | Zinc-Plated Steel | -50° to 200° | 0000000 | 0000 |
Choose-a-Color Adjustable Handles
Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. Made of plastic, all of these handles resist oil, grease, and solvents. The fiberglass-reinforced handles provide added strength.
Threaded-hole handles install on a threaded stud.
For technical drawings and 3-D models, click on a part number.
Cam Handles
Use these standard cam handles for most clamping applications. Push down on the handle and the head applies pressure to quickly draw two parts together for fast adjustments. Clamping distance is how far the handle will draw parts together when clamped.
Threaded-hole handles install on a threaded stud.
Threaded-stud handles mount into a threaded hole.
Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Thread | Handle | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Clamping Distance | Lg. | Wd. | Center Ht. | Clamped Ht. | Max. Clamping Force, lbs. | Washer Material | Thrust Washer Material | Each | |
Black Powder-Coated Aluminum | ||||||||||
10-32 | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Plastic | 0000000 | 000000 |
Thread | Handle | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Clamping Distance | Lg. | Wd. | Center Ht. | Clamped Ht. | Max. Clamping Force, lbs. | Stud Material | Washer Material | Thrust Washer Material | Each | |
Black Powder-Coated Aluminum | ||||||||||||
10-32 | 13/16" | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Steel | Plastic | 0000000 | 000000 |
10-32 | 1 3/16" | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Steel | Plastic | 0000000 | 00000 |
10-32 | 1 9/16" | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Steel | Plastic | 0000000 | 00000 |
10-32 | 1 15/16" | 3/64" | 2 3/4" | 9/16" | 9/16" | 7/8" | 875 | Steel | Steel | Plastic | 0000000 | 00000 |
Quick-Release Shaft Collar Handles
These threaded handles take the place of a set screw, allowing you to move set screw shaft collars without additional tools—useful for when the collar serves as a stroke limiter or mounting clamp. The handle keeps your collar secure on the shaft, then lets you loosen and tighten the collar for quick adjustments.
Black-oxide steel handles have some corrosion resistance. 303 stainless steel handles have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.