McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    144 Products

    Reamers

    Finish holes to precise inch, metric, wire gauge, or letter sizes with these reamers.
    Adjustable Size, Square Shank
    Finish multiple hole sizes with one reamer by moving the adjustable blades within the diameter range. Convenient for maintenance work, these have a large diameter range and don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Extension pilots (not included) can be used in place of the end adjustment nut to align holes that are spaced far apart.
    Straight Blade—Use these reamers in straight holes that don't have a keyway or other breaks in the surface.
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Replacement Blades
    Optional
    Extension Pilots
    Reamer Dia.
    Material
    Square Shank
    Size
    Overall
    Lg.
    No. of
    Blades
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    Each
    Straight Blade
    Image of Product. Front orientation. Reamers. Reamers, Adjustable Size, Square Shank, Straight Blade.
     
    Inch
    0.2500" to 0.2813" (1/4" to 9/32")High-Speed Steel0.1160"3 1/4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000000400000000000000000000000000
    0.2813" to 0.3125" (9/32" to 5/16")High-Speed Steel0.1250"3 5/8"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.3125" to 0.3438" (5/16" to 11/32")High-Speed Steel0.1560"4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.3438" to 0.3750" (11/32" to 3/8")High-Speed Steel0.1560"4 1/4"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.3750" to 0.4063" (3/8" to 13/32")High-Speed Steel0.1710"4 1/2"4Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000004000000000000000000000000
    0.4063" to 0.4375" (13/32" to 7/16")High-Speed Steel0.1870"4 3/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    0.4375" to 0.4688" (7/16" to 15/32")High-Speed Steel0.1870"5 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000060000000000000000000000000
    0.4688" to 0.5313" (15/32" to 17/32")High-Speed Steel0.1870"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.5313" to 0.5938" (17/32" to 19/32")High-Speed Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.5938" to 0.6563" (19/32" to 21/32")High-Speed Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.6563" to 0.7188" (21/32" to 23/32")High-Speed Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.7188" to 0.7813" (23/32" to 25/32")High-Speed Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.7813" to 0.8438" (25/32" to 27/32")High-Speed Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.8438" to 0.9375" (27/32" to 15/16")High-Speed Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")High-Speed Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.0625" to 1.1875" (1 1/16" to 1 3/16")High-Speed Steel0.5310"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.1875" to 1.3438" (1 3/16" to 1 11/32")High-Speed Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel000000000000060000000000000000000000000
    1.3438" to 1.5313" (1 11/32" to 1 17/32")High-Speed Steel0.6400"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    1.5313" to 1.7813" (1 17/32" to 1 25/32")High-Speed Steel0.7500"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    1.7813" to 2.0938" (1 25/32" to 2 3/32")High-Speed Steel0.9370"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    2.0938" to 2.4688" (2 3/32" to 2 15/32")High-Speed Steel1.1870"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened Steel0000000000000600000000000000000000000000
    2.1875" to 2.5625" (2 3/16" to 2 9/16")Tool Steel1.2500"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    2.5625" to 3.0000" (2 9/16" to 3")Tool Steel1.4680"20"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
     
    Angled Blade
    Image of Product. Front orientation. Reamers. Reamers, Adjustable Size, Square Shank, Angled Blade.
     
    Inch
    0.4219" to 0.4531" (27/64" to 29/64")Tool Steel0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.4219" to 0.4688" (27/64" to 15/32")Tool Steel0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000600000000000000000000000
    0.4375" to 0.5000" (7/16" to 1/2")Tool Steel0.1870"5 3/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.4688" to 0.5313" (15/32" to 17/32")Tool Steel0.1870"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.5000" to 0.5625" (1/2" to 9/16")Tool Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000600000000000000000000000
    0.5313" to 0.5938" (17/32" to 19/32")Tool Steel0.2180"5 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.5625" to 0.6250" (9/16" to 5/8")Tool Steel0.2640"5 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.5938" to 0.6563" (19/32" to 21/32")Tool Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.6250" to 0.6875" (5/8" to 11/16")Tool Steel0.2810"6 5/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.6563" to 0.7188" (21/32" to 23/32")Tool Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.6875" to 0.7500" (11/16" to 3/4")Tool Steel0.3120"6 7/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000006000000000000000000000000
    0.7188" to 0.7813" (23/32" to 25/32")Tool Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7500" to 0.8125" (3/4" to 13/16")Tool Steel0.3430"7 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.7813" to 0.8438" (25/32" to 27/32")Tool Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8125" to 0.8750" (13/16" to 7/8")Tool Steel0.4060"7 1/2"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8438" to 0.9375" (27/32" to 15/16")Tool Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.8750" to 1.0000" (7/8" to 1")Tool Steel0.4370"8 1/8"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")Tool Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.0000" to 1.1250" (1" to 1 1/8")Tool Steel0.5000"9 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.0625" to 1.1875" (1 1/16" to 1 3/16")Tool Steel0.5310"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.1250" to 1.2500" (1 1/8" to 1 1/4")Tool Steel0.5490"10 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.1875" to 1.3438" (1 3/16" to 1 11/32")Tool Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000600000000000000000000000
    1.2500" to 1.4375" (1 1/4" to 1 7/16")Tool Steel0.6250"11 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000000000000000
    1.3438" to 1.5313" (1 11/32" to 1 17/32")Tool Steel0.6400"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.4375" to 1.6250" (1 7/16" to 1 5/8")Tool Steel0.7500"12"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000060000000000000000000000000
    1.5313" to 1.7813" (1 17/32" to 1 25/32")Tool Steel0.7500"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.6250" to 1.8750" (1 5/8" to 1 7/8")Tool Steel0.8750"14 1/4"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.7813" to 2.0938" (1 25/32" to 2 3/32")Tool Steel0.9370"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    1.8750" to 2.1875" (1 7/8" to 2 3/16")Tool Steel1.0320"16"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
    2.0938" to 2.4688" (2 3/32" to 2 15/32")Tool Steel1.1870"18"6Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000600000000000000000000000000
     

    Reamers for Hole Alignment

    Enlarge holes to correct misalignment and overlap. Misaligned holes often have a narrow entry, so the tapered shape is easier to insert and makes more contact to remove the overlapping material. These are also known as bridge and car reamers.
    Adjustable Size, Square Shank
    Image of Product. Front orientation. Reamers. Reamers for Hole Alignment, Adjustable Size, Square Shank, Angled Blade.

    Angled Blade

    One tool both finishes multiple diameters and enlarges holes to correct misalignment and overlap. Also known as bridge and car reamers, they have a tapered shape that fits into the narrow entry of misaligned holes and makes more contact to remove the overlapping material. Change the reamer size by moving the adjustable blades within the diameter range.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Long Reach—Align holes spaced far apart with reamers that have a long, built-in pilot. A floating sleeve guides and steadies the pilot through holes.
    Lg.
    Replacement Blades
    Reamer Dia.
    Material
    Square Shank
    Size
    Pilot
    Overall
    No. of
    Blades
    Performance
    For Use On
    Each
    Pkg.
    Qty.
    Pkg.
    Angled Blade
     
    Inch
    0.4688" to 0.5313" (15/32" to 17/32")Tool Steel0.1870"10"15 5/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000060000000000000
    0.5313" to 0.5938" (17/32" to 19/32")Tool Steel0.2180"10"15 5/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.5938" to 0.6563" (19/32" to 21/32")Tool Steel0.2810"12"18 5/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.7188" to 0.7813" (23/32" to 25/32")Tool Steel0.3430"16"23 1/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.7813" to 0.8438" (25/32" to 27/32")Tool Steel0.4060"16"23 1/2"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
    0.9375" to 1.0625" (15/16" to 1 1/16")Tool Steel0.5000"18"27 1/8"6Long ReachAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium00000000000006000000000000
     

    Reamer Sets

    Keep a variety of reamer sizes on hand for finishing holes.
    Adjustable Size, Square Shank
    Image of Product. Front orientation. Reamers. Reamer Sets, Adjustable Size, Square Shank.
    Work on a wide range of hole diameters by keeping a set of adjustable reamers on hand. Each reamer can finish multiple hole sizes by moving the adjustable blades within the diameter range. Convenient for maintenance work, these don't require powered tools. They're often used to make precise size adjustments during installation of bearings and bushings.
    Move the blades by tightening and loosening the two nuts on the reamer. To measure size, adjust blades to a known size (such as a bushing or ring), or measure across two opposite blades with a micrometer. When the blades become worn, they can be reground or replaced.
    Turn these reamers by hand with an adjustable wrench or straight-handle tap wrench (sold separately).
    Straight Blade—Use these reamers in straight holes that don't have a keyway or other breaks in the surface.
    Angled Blade—These reamers are better than those with straight blades for finishing holes with breaks in the surface, such as a keyway.
    High-Speed Steel—Durable and wear resistant, these are good for general purpose reaming in most materials.
    Tool Steel—Typically more economical but less durable than high-speed steel, these are for general purpose reaming.
    Sizes Included
    No. of
    Pieces
    Material
    Container
    Type
    For Use On
    Each
    Straight Blade
     
    Inch
    1/4"-15/32"7High-Speed SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000000
     
    Angled Blade
     
    Inch
    7/16"-1 1/4"10Tool SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
    15/32"-1 1/16"8Tool SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium0000000000000
    15/32"-1 17/32"11Tool SteelWood CaseAluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Steel, Titanium000000000000000
     
    back to top