We will reply to your message within an hour.
Attach these needles to a syringe with a luer lock or luer slip connection type to dispense liquids.
Avoid contaminating your sample while dispensing liquid from a syringe.
Attach the needles in these assortments to syringes with luer lock or luer slip connections.
Precisely dispense sticky adhesives and liquids.
Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.
Curve these plastic needles to reach into tight spots. They can be cut to the length you need. Attach them to syringes with luer lock connections.
Prevent damage to your syringe needles and keep their contents from leaking, drying out, curing, or getting contaminated.
To protect sensitive equipment, these needles drain electrostatic discharge (ESD) from the materials they dispense.
Dispense fluid from syringes and other small instruments with luer lock or luer slip connections.
Evenly apply adhesive, lubricant, and solvent from syringes and dispensers with luer lock and luer slip connections.
Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection.
The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.
Change the connection on syringes, dispensing tips, and needles to either a luer lock or threaded connection.
Drain static from the material you’re dispensing from a syringe or other small instrument. These tips protect sensitive equipment from electrostatic discharge (ESD).
Use these syringes with an air-powered dispenser to make repetitive dispensing easier on your hands.
Prevent static from damaging sensitive equipment as you use an air-powered dispenser.
No need to connect a needle or tip—just trim the opening size of these syringes to the diameter you need.
To make slow and steady dispensing comfortable, these syringes have a ring grip to give your fingers a secure hold.
With a tighter tolerance than plastic syringes, these glass syringes are better at dispensing small, precise samples and leaving little left over.
Made of plastic, these syringes are shatter resistant and suitable for use with a variety of liquids.
A curved plastic tip fits into bearing seals, narrow holes in housings, and around small parts in 3D printers and other machinery. Use these syringes to control the direction of flow so you don't make a mess.
Dispense corrosive and aggressive liquids with these syringes. They're made of stainless steel, so they're not only highly chemical resistant but also extremely durable—they're our longest-lasting syringes.
Dispense up to 2 liters of gas or liquid for applications ranging from air gas sampling to calibrating reservoirs.
A turn of the threaded plunger dispenses extremely small quantities—as small as a speck of dust.
Hold these syringes like a pencil and press the trigger for controlled dispensing without hand fatigue.
Collect gas and liquid samples without worrying about evaporation or leaks. These syringes have a locking valve that keeps your sample secure.
The ergonomic design helps reduce fatigue when dispensing one-part adhesives, sealants, and fluids.
Filter out contaminants when drawing in and dispensing from syringes with a luer lock connection.
Cover the end of syringes to protect them and prevent leaks.
Reduce fatigue by using pressure from your air compressor to dispense viscous fluids.
Hang syringes when not in use to prevent contamination and spills.
Each pull of the trigger dispenses a set amount of liquid, making these guns useful for repeated dispensing applications.
With their heavy duty spring-action trigger, these guns easily apply thick liquids such as adhesives.
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.
Only for use with 3M dual cartridges, these guns dispense two-part adhesives.
Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.
Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.
Fill these cartridges with the two-part adhesive of your choice.
Dispense small amounts of two-part adhesives.
Attach these nozzles to a cartridge for controlled dispensing.
Fill these cartridges with one-part adhesive.
Similar to a caulk gun, these guns are good for small jobs.
Use these dispensing guns with Loctite® single-component syringes.
Guns are powered with compressed air for controlled dispensing on small and large jobs alike.
Choose from cone tips, L-tips, and T-tips.
Achieve the perfect bead every time.
Dispense caulk from sausage-pack guns.
Dispense sealants packaged in sausage packs.
Unlike standard caulk guns, these guns measure just 4" long and don’t have a cartridge rod, so you can use them in snug spaces and around tight corners.
These flexible extensions add length and bend 180° to get into hard-to-reach areas.
Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.
Power without a cord means you can take these sealant-dispensing guns wherever you need them.
Dispense sealants from cartridges with ease and control.
Let compressed air do the work for you when dispensing sealants from cartridges.
Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.
Dispense caulk from bulk-load guns.
Immerse the nozzle in the sealant and pull back the rod to fill.