About Plastic
More
Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Balls
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2480
Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
|---|---|---|---|---|
| 1/16" | -0.001" to 0.001" | 100 | 000000 | 00000 |
| 3/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 1/8" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 9/64" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 5/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 3/16" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 7/32" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 1/4" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 9/32" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
| 5/16" | -0.001" to 0.001" | 100 | 0000000 | 0000 |
| 3/8" | -0.001" to 0.001" | 100 | 0000000 | 00000 |
| 7/16" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
| 1/2" | -0.001" to 0.001" | 50 | 0000000 | 00000 |
| 9/16" | -0.001" to 0.001" | 25 | 0000000 | 0000 |
| 5/8" | -0.001" to 0.001" | 25 | 000000 | 00000 |
| 3/4" | -0.001" to 0.001" | 10 | 0000000 | 0000 |
| 13/16" | -0.001" to 0.001" | 1 | 0000000 | 0000 |
| 7/8" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
| 15/16" | -0.001" to 0.001" | 1 | 0000000 | 0000 |
| 1" | -0.001" to 0.001" | 10 | 0000000 | 00000 |
| 1 1/8" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
| 1 1/4" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
| 1 1/2" | -0.002" to 0.002" | 1 | 0000000 | 0000 |
| 2" | -0.002" to 0.002" | 1 | 0000000 | 00000 |
Metric | ||||
| 2mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
| 3.5mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
| 4mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
| 5mm | -0.0254mm to 0.0254mm | 100 | 0000000 | 0000 |
| 8mm | -0.0254mm to 0.0254mm | 50 | 0000000 | 0000 |
Clean Room Stud-Mount Ball Transfers
Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination. These ball transfers were originally developed for the electronics manufacturing industry, where aligning glass layers in monitors and screens must be done without introducing dust. Use them to create conveyors, transfer tables, and material staging areas in your clean room.
Acetal ball transfers are best for light duty applications.
Thread | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Size | Pitch, mm | Stud Lg. | Temperature Range, °F | Environmental Rating | Each | |
Acetal Plastic Ball | ||||||||||||
Acetal Plastic Housing | ||||||||||||
| 3/8" | 1 1/2 | 9/16" | 21/32" | Ball Up | White | M8 | 1.25 | 15/32" | 0° to 175° | Fed. Std. Class 1,000 | 0000000 | 000000 |
Flange-Mount Ball Transfers
Acetal balls are abrasion resistant.
For technical drawings and 3-D models, click on a part number.
Flange | Mounting Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Dia. | Cap., lbs. | Ht. | Dia. | Working Orientation | Housing Color | Lg. | Wd. | No.of Mounting Holes | Dia. | Ctr.-to-Ctr. | Temperature Range, °F | Each | ||
Acetal Plastic Ball | ||||||||||||||
Nylon Plastic Housing | ||||||||||||||
| G | 1" | 20 | 1 5/16" | 1 5/16" | Ball Up | White | 2 1/2" | 1 3/4" | 2 | 7/32" | 1 3/4" | 32° to 195° | 0000000 | 000000 |