A motor and speed reducer in one, these gearmotors have hypoid gears for energy-efficient operation. You can use them to turn a shaft on your equipment or add a keyed shaft (sold separately). Wire for clockwise or counterclockwise rotation; instructions are included. Gearmotors meet IP54 for protection from dust and splashed water. They're inverter rated so you can use them with a motor speed control (not included) to adjust the motor speed.

For technical drawings and 3-D models, click on a part number.

Run high-torque, low speed applications in cramped areas that are frequently hosed down. To save space, these transmit motion at a 90° angle from the the body of the motor, so they're positioned alongside equipment when mounted. They’re rated IP66 for protection from dust and water, and have a drain that allows internal condensation to escape, preventing corrosion. These TEFC (totally enclosed fan cooled) motors have an external fan that keeps them cool.

They’re inverter rated, so you can use them with a motor speed control (not included) to adjust the motor speed. Wire motors for clockwise or counterclockwise rotation; instructions are included.

For technical drawings and 3-D models, click on a part number.

IP rated, these gearmotors stand up to high-pressure washdowns. They combine a motor with a speed reducer to lower speed while increasing torque. Their parallel shaft transmits motion inline with the motor.

Since they’re inverter-rated, you can adjust the speed with a motor speed control (not included). Wire these motors for clockwise or counterclockwise rotation; instructions are included.

Base-mount motors come with a base, so they can be secured to a flat surface. Face-mount motors bolt directly to your equipment. They require a power cord (sold separately).

TEFC (totally enclosed fan cooled) enclosures protect against dirt, dust, and moisture. An external fan blows air on the enclosure to keep it cool. TENV (totally enclosed non-ventilated) enclosures are similar to TEFC enclosures, except they don’t have a fan. They rely on air circulation from the motion of the motor for cooling.

Motors rated IP66 have a labyrinth drain plug that keeps water out while letting condensation escape. Motors rated IP69K protect against dust, debris, and high-temperature washdowns.

For technical drawings and 3-D models, click on a part number.

Sized for small spaces, these gearmotors mount from the base or face for flexibility to fit in tight locations. Each has a motor matched with a speed reducer to lower speed while increasing torque. An optional plastic fan is included to improve cooling when using the gearmotor in a clockwise direction.

To reverse the direction of the gearmotor, loosen the mounting screws, remove the stator, and rotate it 180°. You’ll also need to replace the original fan blades with fan blades for counterclockwise shaft rotation (sold separately).

For technical drawings and 3-D models, click on a part number.

Power equipment in applications with limited space. Gearmotors have a motor matched with a speed reducer to lower speed while increasing torque. An optional plastic fan is included to improve cooling when using the gearmotor in a clockwise direction.

To reverse the direction of the gearmotor, loosen the mounting screws, remove the stator, and rotate it 180°. You’ll also need to replace the original fan blades with fan blades for counterclockwise shaft rotation (sold separately).

For technical drawings and 3-D models, click on a part number.

A good solution for tight spaces, these gearmotors let you control the start, stop, rotation direction, and speed while transmitting motion at a 90° angle from the motor, so you can mount them alongside your application. They combine a motor with a speed reducer to lower speed while increasing torque. All have a mounted keypad to make changes to the integrated speed control. Mount them to flat surfaces using their base. These gearmotors have a TEFC (totally enclosed fan cooled) enclosure that protects better than an ODP (open dripproof) enclosure. They aren’t airtight, but they can be used in dirty, dusty, and damp environments. To keep the motor cool, the enclosure has an external fan that blows air over the outside of the motor.

For technical drawings and 3-D models, click on a part number.

Start, stop, reverse direction, and control the speed of these gearmotors from the mounted keypad. Because you can fine tune output speed and direction, these gearmotors are often used in material processing and handling applications, such as controlling the speed of a mixer or conveyor. These gearmotors are both a motor and speed reducer in one to lower speed while increasing torque. All transmit motion inline with the motor. Secure them to flat surfaces with the base mount. These gearmotors have a TEFC (totally enclosed fan cooled) enclosure that protects better than ODP (open drip proof) enclosures. They are not airtight but can be used in dirty, dusty, and damp environments. To keep the motor cool, they have an external fan that blows air over the outside of the motor.

For technical drawings and 3-D models, click on a part number.