Coated with aluminum oxide—the most common abrasive material, hard enough to sand steel and wood.

A selection of 40 emery and crocus sanding sheets are included in these assortments.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

A thicker, heavier construction than standard rolls withstands tough sanding.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

These sheets resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

Use these rolls to create consistent finishes on hard metals such as stainless steel, iron, and nickel.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

Cut the length you need, then quickly attach, remove, and reuse.

Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials.

Quickly attach, remove, and reuse these hook-and-loop sheets with pole sanders.

Quickly attach, remove, and reuse.

Quickly switch between different grits—these sanding sheets attach and detach from a compatible sanding block with hook and loop.

Dust and debris won't build up on the abrasive surface.

Press onto a compatible sanding tool or backup pad; peel off to remove.

A coating prevents dust and debris from building up on the abrasive surface.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The premium abrasive stays sharp longer.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

Holes allow dust removal when used with a vacuum sander.

The abrasive material on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and iron without dulling quickly.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Quickly sand while capturing up to 97% of the dust generated.

These discs have multiple layers of brick-shaped abrasive arranged in a pattern to create highly consistent finishes.

Coated with either ceramic alumina or a premium form of aluminum oxide, these discs last longer, cut faster, and produce a more consistent finish than standard hook and loop discs.

These discs have a long-lasting diamond abrasive.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

A special fastener on the back of these discs allows you to easily swap one disc for another.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

These discs have 30% more flaps than standard flap sanding discs to last longer.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

These discs have a harder abrasive than standard flap sanding discs.

The abrasive flaps wrap around the outer edge of these discs to reach in and sand welds at right angles (fillet welds).

Reach ceilings and high walls.

Attach a nylon mesh sanding pad to these blocks for improved comfort and control.

With rapid back and forth movements in a straight line, these sanders remove more material than random orbital sheet sanders.