The entire top opens to accommodate large parts. A dust collector removes dust from inside the cabinet. Not for use with silica sand, steel shot, baking soda, and plastic grit.

Lift the front door to load and remove parts. A dust collector removes dust from inside the cabinet. Not for use with silica sand, steel shot, baking soda, and plastic grit.

Not for use with silica sand, steel shot, baking soda, and plastic grit.

Cabinet with a dust collector has a safety switch that shuts off airflow when the cabinet door is opened. The dust collector removes dust from the cabinet.

Cabinet without a dust collector can be hooked up to dust collector (sold separately) or a shop vacuum using the cabinet's 2 1/4" port.

Smooth and clean parts hands-free. With these cabinets, you won't have to juggle moving your part, holding the blasting gun, and pressing a pedal to blast like you would with traditional abrasive blasters. Just choose a cleaning routine on the touchscreen and they’ll get the job done in as little as 15 minutes. They both blast and tumble your parts to remove rough edges and contaminants from every inch, even from holes and internal channels. And to make your parts clean to the touch, an ionizer at the tip of the blasting gun neutralizes the charge. That means static won’t cause particles to cling to your parts. For delicate parts you don’t want to tumble, switch to manual mode and use these cabinets like a traditional blasting cabinet.

They’ll work anywhere with a compressed air source. Quieter than a hair dryer, the tempered glass window muffles their noise. They also filter debris out from the media, recycling it so you can use it again.

Note: Not for use with silica sand, steel shot, or baking soda.