Filter by
For Use With
Air Consumption @ Pressure
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Abrasive Blasting Guns
 |
Components of a Suction Feed Abrasive Blaster |
 |  |  |  |
Style A | Style B | Style C | Style D |
Foot-Pedal Control
| |
Style A | Style B |
Connect to a foot pedal switch (sold separately) so you don’t have to squeeze the trigger to blast. They’re more comfortable to use when blasting for longer periods. They can also be used in systems with a shutoff valve on the air line.
Style A—Replace the nozzle in these guns when it wears out.
Style B—The grip on these guns is shaped to comfortably fit your hand. Replace the nozzle when it wears out.
Abrasive Blasting Guns | Replacement Nozzles | Replacement Air Jets | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Air Jet | Air Inlet | ||||||||||||||||
Tip ID | Base OD | Material | Air Consumption @ Pressure | ID | Material | Req. Air Pressure, psi | For Air Hose ID | Pipe Size | Thread Type | For Nozzle Shape | Each | Each | Each | |||||
Style A | ||||||||||||||||||
Abrasive Blasting Guns | ||||||||||||||||||
| 1/4" | 7/16" | Carbide | 6 ft³/min @ 80 psi | 1/16" | Carbide | 40 to 100 | 3/8" | 3/8 | NPT | Straight | 4230N11 | 000000 | 3426K14 | 000000 | 4230N23 | 000000 | ||
Aluminum | ||||||||||||||||||
| 1/4" | 9/16" | Carbide | 12 ft³/min @ 80 psi | 1/8" | Carbide | — | 3/8" | 1/4 | NPT | Straight | 3283K69 | 00000 | 3283K71 | 00000 | 3283K68 | 00000 | ||
| 5/16" | 3/4" | Carbide | 25 ft³/min @ 80 psi | 5/32" | Carbide | — | 3/8" | 1/4 | NPT | Straight | 3283K89 | 00000 | 3283K72 | 00000 | 3283K73 | 00000 | ||
Style B | ||||||||||||||||||
Abrasive Blasting Guns | ||||||||||||||||||
| 21/32" | 3/4" | Carbide | 45 ft³/min @ 80 psi | 7/32" | Carbide | 40 to 100 | 3/8" | 3/8 | NPT | Straight | 4230N12 | 000000 | 3426K13 | 00000 | 4230N21 | 00000 | ||
Aluminum | ||||||||||||||||||
| 5/16" | 3/4" | Carbide | 25 ft³/min @ 80 psi | 5/32" | Carbide | — | 3/8" | 1/4 | NPT | Straight | 3463K82 | 000000 | 3283K72 | 00000 | 3463K84 | 00000 | ||
Trigger Control
| |
Style C | Style D |
Squeeze the trigger to initiate air flow. These guns are ideal for short, controlled bursts. They can be tiring on your hands when blasting over longer periods of time.
Style C—Replace the nozzle in these guns when it wears out.
Style D—Since these guns have a built-in nozzle, you’ll need to replace the entire gun when the nozzle wears out.
Abrasive Blasting Guns | Replacement Nozzles | Replacement Air Jets | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Air Jet | Air Inlet | For Nozzle | ||||||||||||||||||
Tip ID | Base OD | Material | Air Consumption @ Pressure | ID | Material | Req. Air Pressure, psi | For Air Hose ID | Pipe Size | Thread Type | Shape | Thread Size | Thread Type | Includes | Each | Each | Each | |||||
Style C | |||||||||||||||||||||
Aluminum | |||||||||||||||||||||
| 3/16" 5/16" | 5/8" | Steel | 6 ft³/min @ 90 psi 18 ft³/min @ 90 psi | 3/32" 5/32" | Steel | 70 to 100 | 3/8" | 1/4 | NPT | Straight | — | — | 14" Long Steel Media Pickup Tube Blast Hose | 3444K71 | 0000000 | 3444K21 | 000000 | 3444K51 | 000000 | ||
| 1/4" | 1/2" | Steel | 15 ft³/min @ 80 psi | 1/8" | Steel | 80 to 125 | 5/16" | 1/4 | NPT | Straight | — | — | — | 4230N14 | 000000 | 3425K52 | 0000 | 3425K58 | 0000 | ||
| 1/4" | 3/4" | Ceramic | 12 ft³/min @ 80 psi | 1/8" | Steel | — | 3/8" | 3/8 | NPT | Straight | — | — | — | 5527K82 | 000000 | 5527K81 | 00000 | 4230N22 | 0000 | ||
| 9/32" | 5/8" | Aluminum | 8 ft³/min @ 75 psi | 1/8" | Steel | 75 to 125 | 3/8" | 3/8 | NPT | Straight | 11/16"-24 | UNF | — | 3443K33 | 000000 | 3443K32 | 000000 | 3443K37 | 00000 | ||
| 5/16" | 5/8" | Steel | 18 ft³/min @ 90 psi | 5/32" | Steel | 70 to 100 | 3/8" | 1/4 | NPT | Straight | — | — | — | 3444K11 | 000000 | 3444K22 | 00000 | 3444K52 | 00000 | ||
Style D | |||||||||||||||||||||
Aluminum | |||||||||||||||||||||
| 1/4" | 1/2" | Steel | 15 ft³/min @ 80 psi | 1/8" | Steel | 80 to 125 | 5/16" | 1/4 | NPT | Straight | — | — | — | 4230N13 | 00000 | ——— | 0 | ——— | 0 | ||
Abrasive Blasting Air Jets
|  |
Components of a Suction Feed Abrasive Blaster |
For Mfr. Model No. | ID | Material | Each | |||
|---|---|---|---|---|---|---|
For ALC | ||||||
| 11604, 11665, 40015, 40017, 40018, 40153, 40162 | 5/64" | Steel | 3425K57 | 00000 | ||
| 11604, 11665, 40015, 40017, 40018, 40153, 40162 | 1/8" | Steel | 3425K58 | 0000 | ||
| 11604, 11665, 40015, 40017, 40018, 40153, 40162 | 5/32" | Steel | 3425K59 | 0000 | ||
| 41700 | 1/8" | Ceramic | 3443K211 | 00000 | ||
For Blowers | ||||||
| QB1, QB2 | 1/8" | Steel | 3443K37 | 00000 | ||
For Dee Blast | ||||||
| 100, 105 | 5/32" | Steel | 3444K52 | 00000 | ||
| 101, 113 | 3/32" | Steel | 3444K51 | 00000 | ||
| 10101, 10103 | 7/32" | Carbide | 3444K28 | 00000 | ||
| 10102, 10104 | 5/32" | Carbide | 3444K36 | 00000 | ||
For Econoline | ||||||
| 201379 | 1/8" | Carbide | 3283K68 | 00000 | ||
| 201381 | 5/32" | Carbide | 3283K73 | 00000 | ||
| 201538 | 1/16" | Carbide | 4230N23 | 00000 | ||
| 201540 | 5/32" | Carbide | 3463K84 | 00000 | ||
| 201542 | 7/32" | Carbide | 4230N21 | 00000 | ||
| 201788 | 1/8" | Carbide | 4230N22 | 0000 | ||
For Port-A-Blast | ||||||
| 30D, 30S, 30SM | 3/32" | Steel | 3158K32 | 0000 | ||
Precise-Control Handheld Abrasive Blasters
 |
Hold these blasters like a pencil to blast small, delicate parts with precision. They spray an airstream that’s five times smaller than standard handheld blasters, so you can target specific features without spraying surrounding areas. Use them for detailed cleaning and precision etching. They have their own media reservoir—just connect an air source. The reservoir sits above the airstream and feeds media by gravity, so you can only blast while holding the blaster horizontally or slightly downward.
Carbide Nozzle—Enough durability for any blasting media, including aggressive ones such as aluminum oxide grit.
Nozzle | Air Inlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | For Media Mesh Size | Tip ID | Material | Air Consumption @ Pressure | Req. Air Pressure, psi | For Air Hose ID | Thread Size | Thread Type | Includes | Each | |||
Gravity Feed | |||||||||||||
Brass | |||||||||||||
| 1/2 | 325-1250 | 0.023" | Carbide | 1 ft³/min @ 40 psi | 20 to 65 | 1/8" | 1/4"-40 | UNS | — | 3210K21 | 000000 | ||
| 1/2 | 325-1250 | 0.023" | Carbide | 1 ft³/min @ 40 psi | 20 to 65 | 1/8" | 1/4"-40 | UNS | 240-Grit Aluminum Oxide Blasting Media (6 oz.) Air Hose with 1/4" NPT Female Connections (6 ft.) Hanger Hook Respirator Mask with Filter | 3210K11 | 00000 | ||
Handheld Abrasive Blasters
 |
Gravity Feed |
Carry these blasters anywhere for small blasting jobs. Use them to clean, etch glass, and remove rust and paint. Unlike abrasive blasting guns, they have their own media reservoir—just connect an air source. The reservoir sits above the airstream and feeds media by gravity. You can only blast while holding the blaster horizontally or slightly downward.
Use them with any abrasive media. They also work for pressure washing with liquids.
Ceramic Nozzle—Ideal for use with glass beads or any softer media. These nozzles are more durable than steel nozzles but less than carbide. They wear quickly when used with more aggressive blasting media such as Black Beauty grit, aluminum oxide grit, or steel shot.
Abrasive Blasters | Replacement Abrasive Blasting Nozzles | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Air Inlet | |||||||||||||
Cap., fl. oz. | For Media Mesh Size | Tip ID | Material | Air Consumption @ Pressure | Req. Air Pressure, psi | For Air Hose ID | Pipe Size | Thread Type | Each | Each | ||||
Gravity Feed | ||||||||||||||
Plastic | ||||||||||||||
| 26 | 8-500 | 3/16" | Ceramic | 10 ft³/min @ 100 psi | 60 to 100 | 1/4" | 1/4 | NPT | 31195K11 | 000000 | 31195K13 | 000000 | ||
 |
Includes | Each | ||
|---|---|---|---|
| 4 Rubber Cones, Collection Bag | 31195K12 | 000000 |
Abrasive Blasting Gun Mounts for Abrasive Blasting Cabinets
 |  |
Shown Installed in a Cabinet |
For Max. Nozzle OD | Lg. | Rotation Angle | Mounting Fasteners Included | Each | ||
|---|---|---|---|---|---|---|
| 3/4" | 7 3/4" to 12 3/4" | 360° | Yes | 3283K22 | 000000 |
Any-Orientation Handheld Abrasive Blasters
 |
Blast at any angle to reach tight spots. These handheld blasters have a suction feed to pull media into the airstream regardless of orientation. Carry them anywhere for small jobs such as cleaning, texturing, etching glass, or removing rust and paint. Just connect an air source—they have a built-in media reservoir.
Use them with any abrasive media. They also work for pressure washing with liquids.
Ceramic Nozzle—Ideal for use with glass beads or any softer media. These nozzles are more durable than steel nozzles but less than carbide. They wear quickly when used with more aggressive blasting media such as Black Beauty grit, aluminum oxide grit, or steel shot.
Steel Nozzle—Best for use with soft media such as walnut shells, corn cobs, or plastic grit. These nozzles wear the most quickly from abrasive blasting media.
Abrasive Blasters | Replacement Abrasive Blasting Nozzles | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Air Jet | Air Inlet | |||||||||||||||
Cap., fl. oz. | For Media Mesh Size | Tip ID | No. of | Material | Air Consumption @ Pressure | ID | Material | Req. Air Pressure, psi | For Air Hose ID | Pipe Size | Thread Type | Each | Each | ||||
Suction Feed | |||||||||||||||||
Zinc Alloy | |||||||||||||||||
| 32 | 60-1000 | 3/16" | 1 | Ceramic | 7 ft³/min @ 80 psi | 3/32" | Steel | 60 to 150 | 1/4" | 1/4 | NPT | 3158K41 | 000000 | 3158K44 | 000000 | ||
| 32 | 60-1000 | 3/16" | 3 | Steel | 7 ft³/min @ 80 psi | 3/32" | Steel | 60 to 150 | 1/4" | 1/4 | NPT | 3158K11 | 000000 | 3158K31 | 00000 | ||
High-Speed Abrasive Blasters
 |
Propel abrasive blasting media at high speeds to boost your blasting throughput. Also known as pressure pot blasters, these blasters use a pressurized tank to force media into the airstream and deliver it at higher speeds than blasters with a suction feed. They’re ideal for aggressively removing thick coatings, rust, and scale from heavy machinery and infrastructure. Because they’re portable, these can clean workpieces too large for blasting cabinets and immobile surfaces. They include a safety handle (also known as a deadman handle) that blocks the blast stream if you let go.
Do not use with dolomite.
Ceramic Nozzle—Ideal for use with glass beads or any softer media. These nozzles are more durable than steel nozzles but less than carbide. They wear quickly when used with more aggressive blasting media such as Black Beauty grit, aluminum oxide grit, or steel shot.
Overall | Nozzle | Air Inlet | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wt. Cap., lb. | Cap., gal. | Wd. | Ht. | Dp. | Tip ID | No. of | Material | Air Consumption @ Pressure | Blasting Time per Load, min. | Req. Air Pressure, psi | For Air Hose ID | Pipe Size | Thread Type | Features | Includes | Certification | Each | |||
Pressure Feed | ||||||||||||||||||||
Steel | ||||||||||||||||||||
| 65 | 4 | 17" | 29 1/2" | 12" | 1/8" 3/32" | 2 1 | Ceramic | 7 ft³/min @ 80 psi | 20 to 30 | 80 to 125 | 3/8", 1/2" | 1/2 | NPT | Pressure Gauge Pressure-Relief Valves Adjustable Abrasive-Flow Valve Wheels | Blast Hose Blasting Gun Safety Blast Hood Safety Handle | ASME BPVC.VIII.1 | 3268K11 | 000000000 | ||
| 110 | 8 | 14" | 39" | 13" | 1/8" 3/32" | 2 1 | Ceramic | 7 ft³/min @ 80 psi | 35 to 50 | 80 to 125 | 3/8", 1/2" | 1/2 | NPT | Pressure Gauge Pressure-Relief Valves Adjustable Abrasive-Flow Valve Wheels | Blast Hose Blasting Gun Safety Blast Hood Safety Handle | ASME BPVC.VIII.1 | 3268K12 | 00000000 | ||
| 150 | 11 | 14" | 39" | 13" | 1/8" 5/32" | 2 1 | Ceramic | 7 ft³/min @ 80 psi | 45 to 60 | 80 to 125 | 3/8", 1/2" | 1/2 | NPT | Moisture Separator Pressure Gauge Pressure-Relief Valves Adjustable Abrasive-Flow Valve Wheels | Blast Hose Blasting Gun Safety Blast Hood Safety Handle | ASME BPVC.VIII.1 | 3268K13 | 00000000 | ||
| 250 | 18 | 17" | 47" | 17" | 1/8" 5/32" | 2 3 | Ceramic | 7 ft³/min @ 80 psi | 60 to 120 | 80 to 125 | 3/8", 1/2" | 1/2 | NPT | Moisture Separator Pressure Gauge Pressure-Relief Valves Adjustable Abrasive-Flow Valve Wheels | Blast Hose Blasting Gun Safety Blast Hood Safety Handle | ASME BPVC.VIII.1 | 3268K14 | 00000000 | ||
Dust Collector Filters for Abrasive Blasting Cabinets
 |
Filter Cartridges |
For Mfr. | For Mfr. Model No. | Material | Reusable | Filter Efficiency @ 0.5 μm | Each | |||
|---|---|---|---|---|---|---|---|---|
Filter Cartridges | ||||||||
| Cadillac | DC-1 | Foam, Paper | Yes | 99.9% | 31205K23 | 0000000 | ||
Abrasive Blasting Cabinets
Freestanding
 |
These cabinets stand on a frame so that the arm holes are at a comfortable height to blast while standing.
Inside | Overall | Front Door | Side Doors | Air Inlet | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | Location | Opening Wd. | Opening Ht. | Pipe Size | Thread Type | Req. Air Pressure, psi | Air Consumption @ Pressure | Features | Includes | Each | |||
Suction Feed | |||||||||||||||||||||
Assembled | |||||||||||||||||||||
| 24" | 23" | 24" | 26" | 63" | 25" | Steel | 24" | 13" | — | — | — | 3/8 | NPT | 10 to 125 | 12 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3283K4 | 000000000 | ||
| 30" | 23" | 24" | 32" | 63" | 25" | Steel | 30" | 13" | — | — | — | 3/8 | NPT | 10 to 125 | 12 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3283K5 | 00000000 | ||
| 36" | 23" | 24" | 39" | 63" | 25" | Steel | 36" | 13" | Right Side | 17" | 11" | 3/8 | NPT | 10 to 125 | 25 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3283K1 | 00000000 | ||
| 48" | 23" | 24" | 51" | 63" | 25" | Steel | 48" | 13" | Left Side, Right Side | 17" | 11" | 3/8 | NPT | 10 to 125 | 25 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3283K9 | 00000000 | ||
Bench Top
 |  |
Shown in Use |
Set these cabinets on your workbench.
Inside | Overall | Front Door | Air Inlet | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | Pipe Size | Thread Type | Req. Air Pressure, psi | Air Consumption @ Pressure | Features | Includes | Each | |||
Suction Feed | ||||||||||||||||||
Assembled | ||||||||||||||||||
| 18" | 16" | 16" | 19" | 33" | 17" | Steel | 18" | 12" | 3/8 | NPT | 10 to 125 | 12 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves Steel Stand | 3464K11 | 000000000 | ||
Abrasive Blaster Safety Switches
 |  |
Toggle Switch Actuator Shown in Use | Handle Actuator Shown in Use |
 | |
Trigger Actuator Shown in Use |
Electric
 |  |
Toggle Switch Actuator | Handle Actuator |
 | |
Trigger Actuator |
These switches send an electric signal to the control panel on the blaster to stop the spray. Because the signal is electric, these switches respond quickly even when your hose is long. They're recommended for hose that's over 100-ft. long and required by OSHA standards for hose that's over 200-ft. long.
Toggle Switch Actuator—Mount on top of your hose and control the toggle with your thumb. They’re smaller and lighter than switches with handle and trigger actuators, but harder to use with bulky gloves.
Handle Actuator—Mount these below your hose to grip the switch and hose together. The large surface area provides leverage when squeezing the switch in your palm, even when wearing bulky gloves.
Trigger Actuator—Extra grip allows you to twist and maneuver the hose without straining your wrist. The trigger is simple to squeeze, even when wearing bulky gloves. To prevent accidents, an included secondary safety lock requires two motions to begin blasting.
Actuator Style | Switch Starting Position | No. of Terminals | Switch Designation | Switching Current @ Voltage | Max. Voltage | Handle Material | Housing Material | Electrical Connection Type | Wire Lead Lg., ft. | NEMA Type | Wd. | Lg. | Ht. | Features | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Toggle Switch | 2 Off | 2 | SPDT | 10 amp @ 125V AC, 125V DC | 125V AC, 125V DC | — | Rubber | Hardwire | 4 | — | 2" | 4 1/16" | 2" | — | 5053N101 | 0000000 | |
| Handle | 1 Off | 3 | SPST-NC | 5 amp @ 24V DC | 28V DC | Stainless Steel | Plastic | Hardwire | 1 | — | 2 1/2" | 5" | 3" | — | 5053N14 | 000000 | |
| Trigger | 1 Off and 1 On | 5 | SPST-NO | 15 amp @ 24V DC | 24V DC | Plastic | Plastic | Plug In | — | L5-15 | 1 3/4" | 8" | 8 1/2" | Hose Clamps, Secondary Safety Lock | 5053N17 | 000000 |
Air Powered
 |  |
Handle Actuator | Trigger Actuator |
Send an air signal to the blaster’s inlet and outlet valves to stop the spray. These switches are easier to install and maintain than electrical switches. However, signal delay increases with hose length, so these switches are not recommended for hose over 100-ft. long.
Handle Actuator—Mount these below your hose to grip the switch and hose together. The large surface area provides leverage when squeezing the switch in your palm, even when wearing bulky gloves.
Trigger Actuator—Extra grip allows you to twist and maneuver the hose without straining your wrist. The trigger is simple to squeeze, even when wearing bulky gloves. To prevent accidents, an included secondary safety lock requires two motions to begin blasting.
Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Actuator Style | Switch Starting Position | Pipe Size | Gender | Thread Type | Pressure Range, psi | Handle Material | Housing Material | Wd. | Lg. | Ht. | Features | Each | ||
| Handle | 1 Off | 1/8, 1/4 | Male | NPT | 55 to 150 | Stainless Steel | Plastic | 2 1/2" | 5" | 3" | — | 5053N15 | 0000000 | |
| Trigger | 1 Off and 1 On | 1/8, 1/4 | Male | NPSM | 78 to 150 | Plastic | Plastic | 1 3/4" | 8" | 8 1/2" | Hose Clamps, Secondary Safety Lock | 5053N18 | 000000 | |
Automated-Control Abrasive Blasting Cabinets
Freestanding
 |
Inside | Overall | Front Door | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Basket Dia. | Opening Wd. | Opening Ht. | Pipe Size | Thread Type | Req. Air Pressure, psi | Air Consumption @ Pressure | Data Connection | Includes | Each | |||
Suction Feed | |||||||||||||||||||
Assembled—Formlabs | |||||||||||||||||||
| 27" | 21" | 26" | 39" | 30" | 69" | Steel | 18" | 39" | 77" | 3/8 | NPT | 90 to 120 | 10 scfm @ 90 psi | USB-C, Wi-Fi | 3 mm OD Blast Orifice 4 mm OD Blast Orifice Floor Mat Static-Control Wrist Strap T20 Torx Screwdriver Tumbling Basket Two Foot Pedals | 9479N111 | 0000000000 | ||
Easy-Hold Abrasive Blaster Safety Switches
 |
Shown in Use |
Reduce fatigue during long blasting sessions—these switches are built into a holder for your blaster hose. The holder has a brace that adjusts to shift most of the hose’s thrust away from your arms and grip, and repositions for comfort or different blasting angles. Switch easily between right- and left-hand use without having to take it apart. The housing has upper and lower rail mounts for optional accessories such as a side handle or flashlight (both sold separately). The mounts swivel around the clamp to keep accessories steady as the hose twists during blasting.
Also known as deadman switches, these switches stop blasting if you lose control. They automatically spring back to the off position to prevent injuries and reduce wasted material. To avoid accidental activation, a secondary safety lock requires an additional motion to begin blasting.
Electric
 |
Trigger Actuator |
These switches send an electric signal to the control panel on the blaster to stop the spray. Because the signal is electric, these switches respond quickly even when your hose is long. They're recommended for hose that's over 100-ft. long and required by OSHA standards for hose that's over 200-ft. long.
Actuator Style | For Hose OD | Switch Starting Position | No. of Terminals | Switch Designation | Switching Current @ Voltage | Max. Voltage, V DC | Housing Material | Electrical Connection Type | NEMA Type | Wd. | Lg. | Ht. | Features | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trigger | 1 3/16", 1 1/2", 1 7/8", 2 5/32" | 1 Off | 4 | SPST | 7 amp @ 12V DC 3 amp @ 24V DC | 24 | Plastic | Plug In | L5-15 | 5 1/4" | 11 3/4" | 13" | Adjustable Brace, Secondary Safety Lock, Upper and Lower Rail Mount | 8816N11 | 0000000 |
Air Powered
 |
Trigger Actuator |
Send an air signal to the blaster’s inlet and outlet valves to stop the spray. These switches are easier to install and maintain than electrical switches. However, signal delay increases with hose length, so these switches are not recommended for hose over 100-ft. long.
Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Actuator Style | For Hose OD | Switch Starting Position | Pipe Size | Gender | Thread Type | Pressure Range, psi | Housing Material | Wd. | Lg. | Ht. | Features | Each | ||
| Trigger | 1 3/16", 1 1/2", 1 7/8", 2 5/32" | 1 Off | 1/4 | Male | NPSM | 80 to 150 | Plastic | 5 1/4" | 11 3/4" | 13" | Adjustable Brace, Secondary Safety Lock, Upper and Lower Rail Mount | 8816N12 | 0000000 | |
Easy-Load High-Speed Abrasive Blasting Cabinets for Large Parts
Freestanding
 |
Inside | Overall | Front Door | Side Doors | Air Inlet | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | Location | Opening Wd. | Opening Ht. | Pipe Size | Thread Type | Req. Air Pressure, psi | Air Consumption @ Pressure | Features | Includes | Each | |||
Pressure Feed | |||||||||||||||||||||
Assembled | |||||||||||||||||||||
| 42" | 36" | 23" | 45" | 71" | 54" | Steel | 42" | 24" | Right Side | 17" | 11" | 1/2 | NPT | 40 to 100 | 15 ft³/min @ 80 psi | Air Regulator and Gauge Bottom-Mount Pressure Pot Dust Collector Hopper Door Steel Mesh Work Table Window | Air Hose Blast Hose 1/8" Carbide Blast Nozzle Foot Pedal Safety Gloves | 7823N11 | 000000000 | ||
Easy-Load Abrasive Blasting Cabinets for Large Parts
Freestanding
 |
Inside | Overall | Front Door | Side Doors | Air Inlet | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | Location | Opening Wd. | Opening Ht. | Pipe Size | Thread Type | Req. Air Pressure, psi | Air Consumption @ Pressure | Features | Includes | Each | |||
Suction Feed | |||||||||||||||||||||
Assembled | |||||||||||||||||||||
| 40" | 30" | 40" | 43" | 82" | 72" | Steel | 40" | 40" | Right Side | 30" | 20" | 3/8 | NPT | 10 to 125 | 25 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3463K26 | 000000000 | ||
| 42" | 23" | 24" | 46" | 65" | 54" | Steel | 42" | 24" | Right Side | 17" | 11" | 3/8 | NPT | 10 to 125 | 25 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3463K24 | 00000000 | ||
| 48" | 40" | 48" | 52" | 94" | 90" | Steel | 48" | 48" | Right Side | 30" | 20" | 3/8 | NPT | 10 to 125 | 25 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3463K27 | 00000000 | ||
| 60" | 40" | 48" | 65" | 92" | 86" | Steel | 60" | 48" | Right Side | 30" | 20" | 3/8 | NPT | 10 to 125 | 25 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door LED Light Safety Switch Steel Mesh Work Table Window | 100-Mesh Glass Bead Blasting Media (10 lbs.) Air Hose Blast Hose Foot Pedal Operated Blasting Gun Foot Pedal Safety Gloves | 3463K28 | 00000000 | ||
High-Speed Abrasive Blasting Cabinets
Freestanding
 |
Inside | Overall | Front Door | Side Doors | Air Inlet | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | Location | Opening Wd. | Opening Ht. | Pipe Size | Thread Type | Req. Air Pressure, psi | Air Consumption @ Pressure | Features | Includes | Each | |||
Pressure Feed | |||||||||||||||||||||
Assembled | |||||||||||||||||||||
| 36" | 23" | 24" | 60" | 65" | 25" | Steel | 36" | 13" | Right Side | 17" | 11" | 1/2 | NPT | 40 to 100 | 15 ft³/min @ 80 psi | Air Regulator and Gauge Dust Collector Hopper Door Side-Mount Pressure Pot Steel Mesh Work Table Window | Air Hose Blast Hose 1/8" Carbide Blast Nozzle Foot Pedal Safety Gloves | 8215N11 | 000000000 | ||
Light Duty Abrasive Blasting Cabinets
Freestanding, Bench Top
 |  |
Shown Unassembled | Pail Not Included |
Inside | Overall | Front Door | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | Quick-Disconnect Style | Coupling Size | Req. Air Pressure, psi | Air Consumption @ Pressure | Exhaust Port ID | Features | Includes | Each | |||
Suction Feed | |||||||||||||||||||
Partially Assembled | |||||||||||||||||||
| 30" | 18" | 19" | 34" | 57" | 22" | Steel | 26" | 19" | Industrial | 1/4 | 40 to 125 | 20 ft³/min @ 90 psi | 2 1/2" | Adjustable Legs LED Light Media Vibrator | Four Ceramic Nozzles (Two 6 mm Nozzles and Two 7 mm Nozzles) Five Protective Window Film Sheets Foot Pedal Operated Blasting Gun Foot Pedal Cyclone for Media Separation | 3283K35 | 0000000 | ||
Static-Eliminating Abrasive Blasting Cabinets
Bench Top
 |
Inside | Overall | Front Door | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Dp. | Wd. | Ht. | Dp. | Material | Opening Wd. | Opening Ht. | For Media Mesh Size | Req. Air Pressure, psi | Air Consumption @ Pressure | Features | Includes | Each | |||
Pressure Feed | |||||||||||||||||
Assembled | |||||||||||||||||
| 20" | 9" | 11" | 22" | 15" | 18" | Steel | 20" | 11" | 60-500 | 0 to 100 | 1.5 ft³/min @ 90 psi | Ground Wire Ionizer | Three Media Storage Tanks Wet-Cling Protective Window Film Sheet LED Light Barbed Adapter for ¼" Hose ID NPT Adapter for ¼ Pipe | 8692N11 | 000000000 | ||
Any-Orientation Precise-Control Handheld Abrasive Blasters
 |
Twist, tilt, and flip these blasters to work on small, delicate parts from any angle. Suction pulls media into the airstream regardless of orientation. The airstream is five times more focused than standard handheld blasters, so you can target specific features without spraying surrounding areas. These blasters are often used for detailed cleaning and precision etching. Since they have a built-in media reservoir, you can carry them anywhere. Just connect them to an air source.
Carbide Nozzle—Enough durability for any blasting media, including aggressive ones such as aluminum oxide grit.
Nozzle | Air Inlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | For Media Mesh Size | Tip ID | Material | Air Consumption @ Pressure | Req. Air Pressure, psi | For Air Hose ID | Thread Size | Thread Type | Includes | Each | |||
Suction Feed | |||||||||||||
Anodized Brass | |||||||||||||
| 2 | 270-1250 | 0.023" | Carbide | 1 ft³/min @ 40 psi | 20 to 65 | 1/8" | 1/4"-40 | UNS | 240-Grit Aluminum Oxide Blasting Media (6 oz.) 6 ft. Air Hose with 1/4 NPT Female Connections | 7514N11 | 000000 | ||
Dry Ice Blasters
 |
The cleanest, safest way to blast. These blasters turn liquid CO2 into dry ice pellets that remove paint, grease, and dirt—without releasing harmful abrasive media into the surrounding air. Since the pellets turn to gas on contact, there's no media left behind to clean up.
Ideal for light surface prep on metals, the dry ice pellets won't scratch or etch your material. Adjust the pressure and spray width for small or large surfaces, and fine-tune your settings in real time using feedback from the display. Do a test run before using these blasters on soft plastics, since the pellets may leave behind a texture. Opt for a blasting setup with conventional media for tough removal of heavy coatings, corrosion, or scale.
You don't need to order pellets to get started. The built-in pelletizer converts liquid CO2 into blasting media as you work. Connect a 50 lb. or 75 lb. CO2 tank with siphon tubes (sold separately). The system draws CO2 only when you pull the trigger, so quick jobs won't drain your tank. Any unused CO2 can be stored for later jobs. Set these blasters up in any well-ventilated space.
Overall | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Ht. | Blasting Time per Load (For Tank Wt. Cap.) | Liquid CO₂ Consumption per Hour, lb. | Solid CO₂ Output per Hour, lb. | Pellet Diameter, mm | Req. Air Pressure, psi | Air Consumption, ft³/min | For Air Hose ID | Coupling Size | Quick-Disconnect Style | Features | Includes | Each | |||
| 22" | 35" | 37" | 30 min. (50 lb.) 45 min. (75 lb.) | 132 | 33 | 2.5 | 10 to 145 | 10 to 52 | 1/2" | 1/2 | High-Flow Industrial | Dry Ice Pelletizer Heat Exchanger Display Pressure Regulator Compressed Air Filter | Wide Airflow Nozzle (Short) Wide Airflow Nozzle (Long) Trigger-Operated Blasting Gun Assembly | 3649N11 | 0000000000 | ||
 |
Control Type | Includes | Each | ||
|---|---|---|---|---|
| Trigger | 16 ft. Blast Hose, Nozzle Holder, Nozzle Light | 3649N501 | 000000000 |
Air-Powered Wire Bristle Blasters
 |  |
Shown in Use |
Connect these blasters to an air source to remove contaminants from metal surfaces without the mess of abrasive media. They strip corrosion, coatings, mill scale, and other contaminants without removing underlying surface material. A rotating belt of wire bristles snaps against the surface to mimic the impact of blasting media. The impact of the bristles creates the same textured finish as blasting media for coating and sealant adhesion. Because they don’t use abrasive media, the only leftover material is the removed debris. This reduces cleanup time and keeps the surrounding air cleaner.
Since they clean only what they touch, these blasters work more slowly than abrasive blasters that sweep large areas. Use them for small- to medium-sized tasks such as cleaning weld seams and prepping parts for coatings.
Hazardous Location Rating—These blasters are approved for use in locations where ignitable gases may be present, such as chemical plants and refineries.
Overall | Hazardous Location | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Wt., lb. | Max. No-Load Rotational Speed, rpm | Blasting Time per Load, min. | Blast Area Coverage per Hour, ft² | Required Air Pressure (For Belt Wd.) | Average Air Consumption, ft³/min | Rating | Protection Type | Container Type | Includes | Each | ||
| 13 3/4" | 2 3/4" | 6 1/4" | 3 | 3,500 | 60 | 15 | 75 psi (7/16") 90 psi (29/32") | 18 | ATEX II 2 G Ex C IIA T4 X, IEC Zone 1 Group IIA | Constructional Safety | — | Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Dust Hood | 8829N12 | 000000000 | |
| 13 3/4" | 2 3/4" | 6 1/4" | 3 | 3,500 | 60 | 15 | 75 psi (7/16") 90 psi (29/32") | 18 | ATEX II 2 G Ex C IIA T4 X, IEC Zone 1 Group IIA | Constructional Safety | Plastic Case | Five 7/16" Wd. Steel Bristle Belts Five 29/32" Wd. Steel Bristle Belts Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Pressure Regulator for 7/16" Wd. Bristle Belts, 75 psi Pressure Regulator for 29/32" Wd. Bristle Belts, 90 psi Dust Hood | 8829N11 | 00000000 | |
Electric Wire Bristle Blasters
|  |
Shown in Use |
Strip contaminants from metal surfaces without the mess of abrasive media. These blasters remove corrosion, coatings, and mill scale without removing underlying material. A rotating belt of wire bristles snaps against the surface to mimic the impact of blasting media. The impact of the bristles creates the same textured finish as blasting media for coating and sealant adhesion. Because they don’t use abrasive media, the only leftover material is the removed debris. This reduces cleanup time and keeps the surrounding air cleaner.
Since they clean only what they touch, these blasters work more slowly than abrasive blasters that sweep large areas. Use them for small- to medium-sized tasks such as cleaning weld seams and prepping parts for coatings.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Wt., lb. | Max. No-Load Rotational Speed, rpm | Blasting Time per Load, min. | Blast Area Coverage per Hour, ft² | Electrical Connection Type | NEMA Type | Container Type | Includes | Each | ||
| 17" | 4" | 9 1/2" | 7 | 3,200 | 60 | 15 | Plug In | 1-15 | — | Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Dust Hood | 8835N12 | 000000000 | |
| 17" | 4" | 9 1/2" | 7 | 3,200 | 60 | 15 | Plug In | 1-15 | Plastic Case | Five 7/16" Wd. Steel Bristle Belts Five 29/32" Wd. Steel Bristle Belts Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Dust Hood | 8835N11 | 00000000 | |
Cordless Wire Bristle Blasters
|  |
Shown in Use |
No need for blasting media, power outlets, or compressed air. These blasters clean and texture surfaces wherever they’re needed. They strip corrosion, coatings, mill scale, and other contaminants from metal surfaces without removing underlying surface material. A rotating belt of wire bristles snaps against the surface to mimic the impact of blasting media. The impact of the bristles creates the same textured finish as blasting media for coating and sealant adhesion. However, they spin slower than electric and air-powered blasters, so they can’t remove heavy coatings and rust. Because they don’t use abrasive media, the only leftover material is the removed debris. This reduces cleanup time and keeps the surrounding air cleaner.
Since they clean only what they touch, these blasters work more slowly than abrasive blasters that sweep large areas. Use them for small- to medium-sized tasks such as cleaning weld seams and prepping parts for coatings.
Wire Bristle Blasters | Replacement Batteries | Replacement Chargers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | |||||||||||||||||
Lg. | Wd. | Ht. | Wt., lb. | Max. No-Load Rotational Speed, rpm | Blasting Time per Load, min. | Blast Area Coverage per Hour, ft² | Battery Charging Time (Battery Cap.) | Batteries Included | Container Type | Includes | Each | Each | Each | ||||
| 21" | 4" | 9 1/2" | 8 | 2,300 | 60 | 15 | 45 min. (8 A·h) | Yes | Plastic Case | Five 29/32" Wd. Steel Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Battery Charger Battery, 18V DC Dust Hood | 8832N11 | 000000000 | 8832N12 | 0000000 | 8832N13 | 0000000 | |
Dust Collectors/Separators for Abrasive Blasting Cabinets
 |  |
Dust Collector/Separator with Foot Control | Dust Collector/Separator |
Salvage reusable media from the dust pulled out of your blasting cabinet. These dust collectors/separators have a two-stage filtration system that separates media from dust and debris better than standard dust collectors. This helps you reclaim more of your media to recycle it back into your cabinet. It also ensures the media that you recycle is clean before you blast your parts with it again. Retrieve your cleaned media from the clean-out port on the bottom. They work with all types of abrasive media.
For 1 1/2 cu. ft. Maximum Cabinet Volume—Collectors/separators for cabinets up to 1 1/2 cu. ft. are compatible with small, benchtop abrasive blasting cabinets.
For 27 cu. ft. Maximum Cabinet Volume—Collectors/separators for cabinets up to 27 cu. ft. would be overkill for small units. Use them with large, freestanding abrasive blasting cabinets.
Dust Collectors | Dust Collector Filters | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Hose | |||||||||||||||||||||||
Airflow Rate, ft³/min | For Max. Cabinet Volume, cu. ft. | For Exhaust Port ID | Filter Type | Filter Efficiency @ 1 μm | Filter Efficiency @ 2 μm | Ht. | Dia. | Wd. | Dp. | Dia. | Lg., ft. | Volume (Sound), dBA | Material | Control Type | Cord Lg., ft. | Voltage | Power, hp | Includes | Features | Each | Each | |||
| 45 | 1 1/2 | 1 1/2", 2 1/2" | Bag | 97% | — | 13 1/2" | — | 14 1/2" | 10 3/4" | 2 1/2" | 6 | 55 | Steel | Foot Control, On/Off Switch | 6 | 120V AC | 1/2 | Hose Fittings | Two-Stage Filtration System | 31205K44 | 000000000 | 3283K91 | 000000 | |
| 8 to 93 | 27 | 2", 2 1/4", 2 1/2" | Cartridge | — | 99% | 47" | 15" | — | — | 1 1/2" | 6 | 68 | Plastic | On/Off Switch | 9 | 120V AC | 1 1/3 | Hose Fittings | Two-Stage Filtration System | 31205K21 | 00000000 | 31205K23 | 000000 | |
Wire Bristle Blaster Belts
Abrasive Blasting Cabinet Work Surfaces
 |  |
Work Surfaces | Dust Screens |
Set your workpieces on these surfaces while you blast. Perforations let your blasting media fall through into your cabinet’s hopper so you can collect it for reuse. Made of metal, they won’t bend or flex under the weight of your workpieces.
Dust Screens—Place a dust screen on top of your work surface to keep paint flakes and other unwanted debris out of your recycled blasting media. Don’t use them without a work surface since they’re not strong enough to hold workpieces on their own.
Work Surfaces | Dust Screens | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | For Mfr. | For Mfr. Model No. | Construction | Mesh Size | Opening Size | Open Area | Each | Mesh Size | Opening Size | Open Area | Each | |||
| 16" | 16" | Econoline | 101691G-A, 101691R-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N11 | 000000 | 6 × 6 | 0.125" | 44% | 9071N101 | 000000 | |
| 24" | 24" | Econoline | 101692G-A, 101692S-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N13 | 00000 | 6 × 6 | 0.125" | 44% | 9071N103 | 00000 | |
| 30" | 24" | Econoline | 101693S-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N14 | 00000 | 6 × 6 | 0.125" | 44% | 9071N104 | 000000 | |
| 36" | 24" | Econoline | 101694D-A, 101694DG-A, 101694G-A, 101694S-A, 101717R-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N15 | 00000 | 6 × 6 | 0.125" | 44% | 9071N105 | 000000 | |
| 40" | 40" | Econoline | 101698CB-A, 101698G-A, 101698R-A, 101698WD-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N16 | 000000 | 6 × 6 | 0.125" | 44% | 9071N106 | 000000 | |
| 42" | 24" | Econoline | 101696R-A, 101696WD-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N17 | 00000 | 6 × 6 | 0.125" | 44% | 9071N107 | 000000 | |
| 48" | 24" | Econoline | 101695S-A, 101697R-A, 101697WD-A, 101697WDG-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N18 | 00000 | 6 × 6 | 0.125" | 44% | 9071N108 | 000000 | |
| 48" | 48" | Econoline | 101699CB-A, 101699G-A, 101699R-A, 101699WD-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N19 | 000000 | 6 × 6 | 0.125" | 44% | 9071N109 | 000000 | |
| 60" | 48" | Econoline | 101701CB-A, 101701G-A, 101701WD-A | Molded | 1 × 0.5 | 1" to 2" | Not Rated | 9071N21 | 000000 | 6 × 6 | 0.125" | 44% | 9071N201 | 000000 | |
