We will reply to your message within an hour.
More
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
Mount these bearings onto a hex shaft.
Mount these bearings onto a square shaft.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
Slip these bearings onto a shaft and secure with the included set screws, no special tools required.
Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.
Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise.
These bearings have twice as many contact points as angular-contact ball bearings.
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Ball bearings operate with less friction than other bearings, so they can run at higher speeds.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.
Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.
Synthetic grease or graphite enables these bearings to operate in high temperatures.
These bearings have the highest speed ratings of any mounted ball bearing that we offer.
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.
These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.
Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.
Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.
These bearings have the highest speed ratings of any mounted ball bearing in our offering.
A bolt in each corner makes for a secure, even hold.
Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.
The lubricant in these mounted ball bearings is suitable for incidental contact with food.
With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
With all three mounting holes on one side, you can position the bearing above or below the mounting surface.
Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.
Swap out worn inserts instead of replacing the entire mounted unit.
Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.