McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    79 Products

    High-Strength Grade 5 Titanium Rods and Discs

    Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Rods
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Rods and Discs.
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/8"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    3/16"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    00000
    1/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    00000
    000000
    5/16"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    000000
    000000
    3/8"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    00000
    000000
    000000
    1/2"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    000000
    000000
    000000
    5/8"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    00000
    000000
    000000
    000000
    3/4"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    7/8"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    00000
    000000
    000000
    000000
    000000
    1"-0.0025" to 0.0025"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    000000
    1 1/4"-0.0025" to 0.0025"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    00000000
    1 1/2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    000000
    00000000
    1 3/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    000000
    00000000
    00000000
    2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    2 1/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    2 1/2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000
    000000
    000000
    00000000
    00000000
    00000000
    Discs
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Rods and Discs.
    1/2" Long
    1" Long
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    Each
    Each
    2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B348———0000000000000000
    3"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000
    3 1/2"-0.005" to 0.005"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000
    4"0" to 0.062"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000
    5"0" to 0.078"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34800000000000000000000000000

    High-Strength Grade 5 Titanium Sheets and Bars

    Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Sheets
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Sheets and Bars.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    Thk.
    Thk. Tolerance
    Mechanical
    Finish
    Flatness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    Each
    Each
    Each
    Each
    Each
    0.016"-0.002" to 0.002"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B26500000000000000000000000000000000000000000000000000000000000000000000000000
    0.032"-0.004" to 0.004"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B265000000000000000000000000000000000000000000000000000000000000000000000
    0.063"-0.005" to 0.005"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B26500000000000000000000000000000000000000000000000000000000000000000000
    1/8"-0.008" to 0.008"Ground1/2"/36"120,000Rockwell C30 (Hard)AnnealedASTM B26500000000000000000000000000000000000000000000000000000000000000000000000
    Bars
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Sheets and Bars.
    Wd.
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    3 ft.
    Long
    1/8" Thk. (-0.01" to 0.01" Tolerance)
    1/2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    0000000
    0000000
    0000000
    1"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
    2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
    3"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
     
    1/4" Thk. (-0.01" to 0.046" Tolerance)
    1/2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
    1"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
    2"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
    3"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
     
    1/2" Thk. (-0.01" to 0.045" Tolerance)
    3"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    00000000
     
    3/4" Thk. (-0.01" to 0.06" Tolerance)
    3/4"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
    1"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B2650000000
    000000
    000000
    000000
     

    High-Strength Grade 5 Titanium Balls

    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Balls.
    Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. These balls are made to Grade 200 tolerances.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Pkg.
    Qty.
    Pkg.
    Mirror Like
    1/32"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed50000000000000
    1/16"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed5000000000000
    1/8"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed5000000000000
    5/32"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed5000000000000
    3/16"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed5000000000000
    7/32"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed50000000000000
    1/4"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed5000000000000
    3/8"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed1000000000000
    1/2"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed1000000000000
    5/8"-0.001" to 0.001"Ground, Polished120,000Rockwell C30 (Hard)Annealed10000000000000
    1 mm-0.025 mm to 0.025 mmGround, Polished120,000Rockwell C30 (Hard)Annealed50000000000000
    2 mm-0.025 mm to 0.025 mmGround, Polished120,000Rockwell C30 (Hard)Annealed50000000000000
     

    Fatigue-Resistant Grade 23 Titanium Rods

    Image of Product. Front orientation. Titanium. Fatigue-Resistant Grade 23 Titanium Rods.
    Purer than Grade 5 titanium, these long-lasting rods resist fracturing from use even when cracked. They’re also easier to form into shapes than Grade 5 titanium and lighter in weight than steel. Thanks to their aluminum and vanadium content, these rods are stronger than pure titanium, though they’re not as strong as Grade 5. They won’t rust, even in marine or saltwater environments. All meet ASTM F136 and ISO standards for biomedical use. They also meet ASTM B348 standards for titanium alloys. Grade 23 titanium is also known as 6-4 ELI and Ti-6Al-4V ELI titanium.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs. Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    1/8"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    0000000
    0000000
    0000000
    0000000
    3/16"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    1/4"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    5/16"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    7/16"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    1/2"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    5/8"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    3/4"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    1"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    1 1/4"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    1 1/2"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-30000000
    000000
    000000
    000000
    000000
    back to top