Filter by
Manufacturer
Manufacturer Model Number
Container Type
For Joining
Adhesive Type
Formulation
Mixing Required
Type
Minimum Temperature
Begins to Harden
Cure Type
Mix Ratio
Approximate Linear Coverage @ Bead Diameter
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Peel Strength
REACH
Reaches Full Strength
RoHS
Elongation
Viscosity
Clarity
Maximum Temperature
About Structural Adhesives
More
Acrylic Structural Adhesives for Hard-to-Bond Materials
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP8005 contains 0.008" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||||
| DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,275 | 9 | 10:1 | Thick Liquid (24,550 cP) | -65° to 200° | Black | Plastic | 00000000 | 000000 |
| DP8005 | 1.52 | Cartridge | 3 min. | 24 hrs. | 2,500 | 17 | 10:1 | Thick Liquid (25,460 cP) | -65° to 200° | Off-White | Plastic | 00000000 | 00000 |