Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
316 stainless steel has excellent resistance to chemicals and salt water.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
24" × 24" | ||||||
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
48" × 48" | ||||||
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
48" × 96" | ||||||
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
Fasteners for Fiberglass Bar Grating
Secure grating to your support structure.
Style A require a hole in the support structure and secure to the structure with a hex head cap screw (not included).
Style B bridge two bearing bars. Fasteners require a hole in the support structure.
Styles C-F hook onto the support structure and are connected by a bolt to the plate on top of the grating. They tighten from above the grating for easy installation.
For technical drawings and 3-D models, click on a part number.
For Drainage Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| Style | For Bearing Bar Ht. | Wd. | Lg. | For Support Structure Thick. | For Screw Dia. | Mounting Hardware Included | Each | |
316 Stainless Steel  | ||||||||
| A | Any | 1 1/2" | 1 1/2" | Any | 1/4" | No | 0000000 | 00000 |
For Bearing Bar | For Drainage Opening | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Style | Ht. | Center-to-Center Wd. | Wd. | Lg. | For Support Structure Thick. | Overall Ht. | Mounting Hardware Included | Each | |
316 Stainless Steel | |||||||||
| B | 1" | __ | 1" | 4" | 1" | 1" | Yes | 0000000 | 000000 |
| B | 1" | __ | 1 1/2" | 1 1/2" | 1" | 1" | Yes | 0000000 | 00000 |
| B | 1", 1 1/2" | 1 1/2" | __ | __ | 1" | 1" | Yes | 0000000 | 00000 |
| B | 1 1/2" | __ | 1 1/2" | 1 1/2" | 1" | 1" | Yes | 0000000 | 00000 |
| B | 2" | __ | 2" | 2" | 1" | 1" | Yes | 0000000 | 00000 |
For Bearing Bar | For Drainage Opening | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Style | Ht. | Center-to-Center Wd. | End-to-End Wd. | Wd. | Lg. | For Support Structure Thick. | Mounting Hardware Included | Each | |
316 Stainless Steel | |||||||||
| C | 3/4" | __ | __ | 1 1/2" | 1 1/2" | 1/4"-3/4" | Yes | 00000000 | 000000 |
| C | 1 1/4" | __ | __ | 1 1/2" | 1 1/2" | 1/4"-3/4" | Yes | 00000000 | 00000 |
| C | 1 3/4" | __ | __ | 2" | 2" | 1/4"-3/4" | Yes | 0000000 | 00000 |
| D | 3/4" | __ | __ | 1" | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
| D | 1 1/4" | __ | __ | 1" | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
| E | 3/4" | __ | 2 1/4" | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
| E | 1 1/4" | __ | 2 1/4" | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
| F | 3/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
| F | 1 1/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
| F | 1 3/4" | 3/8"-2 1/4" | __ | __ | __ | 1/4"-3/4" | Yes | 00000000 | 00000 |
Fasteners for Metal Bar Grating
Secure grating to your support structure.
C-clips hook onto the support structure and are connected by a bolt to the plate on top of the grating. They tighten from above the grating for easy installation.
For technical drawings and 3-D models, click on a part number.
For Bearing Bar | 316 Stainless Steel | ||||||
|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Center-to-Center Wd. | For Support Structure Thick. | Mounting Hardware Included | Pkg. Qty. | Pkg. | |
| 1" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 00000 |
| 1 1/4" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
| 1 1/2" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
| 1 3/4" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |
| 2" | 1/4" | 1 3/16" | 1/4"-3/4" | Yes | 1 | 00000000 | 0000 |