Filter by
Material
Plunger Material
System of Measurement
For Total Panel Thickness
Nut Type
Thread Size
For Outer Panel Thickness
Captive Panel Screw Type
Drive Style
Retainer Material
Performance
Export Control Classification Number (ECCN)
DFARS Specialty Metals
RoHS
Vibration-Resistant Captive Panel Screws
 |  |
An expanding rubber bushing damps vibration while holding panels together. To install, push the threaded end through a hole in the outer panel, slide on the bushing, and tighten the nut. Next, insert the assembly through the inner panel hole and flip the handle to fasten. They become a part of the panel when installed, so they won't fall out and get lost.
For Panel Thk. | For Outer Panel Cutout | Handle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Outer | Max. Total | Ht. | Wd. | For Inner Panel Hole Dia. | Lg. | Ht. | Material | Color | Screw Lg. | Bushing Material | Nut Material | Each | |||
Zinc | |||||||||||||||
| 0.01" to 0.13" | 0.26" | 0.161" | 0.13" | 0.375" | 1.09" | 0.31" | Nylon | Black | 0.52" | Rubber | Nylon | 90702A810 | 00000 | ||
Brass | |||||||||||||||
| 0.01" to 0.19" | 0.38" | 0.228" | 0.177" | 0.547" | 1.53" | 0.45" | Nylon | Black | 0.75" | Rubber | Nylon | 90702A910 | 0000 | ||
Push/Pull Captive Panel Screws
 |  |
Push the plunger to secure and pull to release for quick access. To install, press the grommet into a hole in the outer panel. Fasteners become a permanent part of the outer panel when installed, so they won't fall out. They meet UL 94 V-2 for flame retardance. Made from plastic, they're chemical resistant and lightweight. Length is measured from under the plunger head.
For Panel Thk. | For Panel Hole Dia. | Head | Material | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Outer | Total | Inner | Outer | Lg. | Dia. | Ht. | Plunger | Grommet | Temp., ° F | Flammability Rating | Color | Pkg. Qty. | Pkg. | |||
| 0.042" | 0.056" to 0.153" | 0.189" | 0.18" | 11/32" | 0.25" | 0.266" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A110 | 000000 | ||
| 0.042" | 0.059" to 0.148" | 0.25" | 0.238" | 3/8" | 0.313" | 0.28" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A106 | 00000 | ||
| 0.042" | 0.059" to 0.148" | 0.316" | 0.294" | 3/8" | 0.375" | 0.3" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A101 | 00000 | ||
| 0.065" | 0.079" to 0.176" | 0.189" | 0.18" | 23/64" | 0.25" | 0.266" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A111 | 00000 | ||
| 0.065" | 0.084" to 0.173" | 0.25" | 0.238" | 25/64" | 0.313" | 0.28" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A107 | 00000 | ||
| 0.065" | 0.084" to 0.173" | 0.316" | 0.294" | 25/64" | 0.375" | 0.3" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A102 | 00000 | ||
| 0.098" | 0.112" to 0.209" | 0.189" | 0.18" | 25/64" | 0.25" | 0.266" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A112 | 00000 | ||
| 0.098" | 0.118" to 0.207" | 0.25" | 0.238" | 7/16" | 0.313" | 0.28" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A108 | 00000 | ||
| 0.098" | 0.118" to 0.207" | 0.316" | 0.294" | 7/16" | 0.375" | 0.3" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A103 | 00000 | ||
| 0.138" | 0.152" to 0.249" | 0.189" | 0.18" | 7/16" | 0.25" | 0.266" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A113 | 00000 | ||
| 0.162" | 0.182" to 0.271" | 0.25" | 0.238" | 1/2" | 0.313" | 0.28" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A109 | 00000 | ||
| 0.162" | 0.182" to 0.271" | 0.316" | 0.294" | 1/2" | 0.375" | 0.3" | Nylon | Polycarbonate | -20 to 185 | UL 94 V-2 | Black | 10 | 93040A104 | 00000 | ||
Rounded Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
 |
Acetal Slotted Drive |
Rivet-mount nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Acetal—Acetal nuts and screws are chemical resistant and lightweight.
For Panel Hole Dia. | Head | Slotted Drive | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Total Panel Thk. | Inner | Outer | Lg. | Dia. | Ht. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temp., ° F | Color | Each | |||
Acetal | |||||||||||||||
| 0.15" to 0.2" | 0.438" | 0.39" | 0.85" | 0.625" | 0.13" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A110 | 00000 | ||
| 0.2" to 0.25" | 0.438" | 0.39" | 0.9" | 0.625" | 0.13" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A120 | 0000 | ||
| 0.3" to 0.35" | 0.438" | 0.39" | 1" | 0.625" | 0.13" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A130 | 0000 | ||
| 0.4" to 0.45" | 0.438" | 0.39" | 1.1" | 0.625" | 0.13" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A140 | 0000 | ||
Wing Head Quarter-Turn Captive Panel Screws with Clip-On Nut
 |
Acetal |
A clip-on nut allows you to mount the screw near the edge of a thin panel. Lock and release access panels, doors, and covers with a quarter-turn. The screw is held to the outer panel by a retainer. Length is measured from under the screw head.
Acetal—Acetal nuts and screws are chemical resistant and lightweight.
For Panel Thk. | Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inner | Total | For Hole Dia. | Wd. | Ht. | Lg. | Nut Wd. | Shank Dia. | Retainer Material | Temp., ° F | Color | Each | |||
Acetal | ||||||||||||||
| 0.03" to 0.09" | 0.29" to 0.34" | 0.512" | 1.1" | 0.43" | 0.95" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A410 | 00000 | ||
| 0.03" to 0.09" | 0.34" to 0.39" | 0.512" | 1.1" | 0.43" | 1" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A420 | 0000 | ||
| 0.03" to 0.09" | 0.44" to 0.49" | 0.512" | 1.1" | 0.43" | 1.1" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A430 | 0000 | ||
Wing Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
 |
Acetal |
Rivet these nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Acetal—Acetal nuts and screws are chemical resistant and lightweight.
For Panel Hole Dia. | Head | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Total Panel Thk. | Inner | Outer | Lg. | Wd. | Ht. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temp., ° F | Color | Each | |||
Acetal | |||||||||||||||
| 0.25" to 0.3" | 0.438" | 0.39" | 0.95" | 1.1" | 0.43" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A210 | 00000 | ||
| 0.3" to 0.35" | 0.438" | 0.39" | 1" | 1.1" | 0.43" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A220 | 0000 | ||
| 0.4" to 0.45" | 0.438" | 0.39" | 1.1" | 1.1" | 0.43" | 0.5" | 0.25" | 0.875" | Acetal | -40 to 190 | Black | 94188A230 | 0000 | ||
Rounded Head Quarter-Turn Captive Panel Screws with Clip-On Nut
 |
Acetal Slotted Drive |
The nut clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Length is measured from under the screw head.
Acetal—Acetal nuts and screws are chemical resistant and lightweight.
For Panel Thk. | Head | Slotted Drive | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inner | Total | For Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Wd. | Shank Dia. | Retainer Material | Temp., ° F | Color | Each | |||
Acetal | |||||||||||||||
| 0.03" to 0.09" | 0.19" to 0.24" | 0.512" | 0.04" | 0.625" | 0.13" | 0.85" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A310 | 00000 | ||
| 0.03" to 0.09" | 0.24" to 0.29" | 0.512" | 0.04" | 0.625" | 0.13" | 0.9" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A320 | 0000 | ||
| 0.03" to 0.09" | 0.34" to 0.39" | 0.512" | 0.04" | 0.625" | 0.13" | 1" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A330 | 0000 | ||
| 0.03" to 0.09" | 0.44" to 0.49" | 0.512" | 0.04" | 0.625" | 0.13" | 1.1" | 0.945" | 0.25" | Acetal | -40 to 190 | Black | 94188A340 | 0000 | ||
Male Threaded Snap-In Standoffs
 |
Lg. | For Hole Dia. | For Panel Thk. | Temp. Range, ° F | Flammability Rating | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|
Nylon 6/6 | |||||||||
8-32 | |||||||||
| 1/2" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | 10 | 1894N11 | 00000 | ||
| 5/8" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | 10 | 1894N12 | 0000 | ||
| 3/4" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | 10 | 1894N13 | 0000 | ||
| 7/8" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | 10 | 1894N14 | 0000 | ||
| 1" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | 10 | 1894N15 | 0000 | ||
Self-Tapping Snap-In Standoffs
 |  |  |
Partially Threaded |
No need for pre-drilled holes— these standoffs snap securely into place on circuit boards. Drive a screw in to cut threads in the standoff and create a permanent hold on panels and enclosures. Disconnect the snap-in end as needed for quick repairs or upgrades. These snap-ins are made of plastic, so they're nonconductive and won't allow electrical currents to pass between circuit boards. Also known as snap-in supports.
Nylon 6/6—Lightweight and stand up to daily wear and tear. Nylon swells and weakens when exposed to moisture, so these standoffs are best for dry environments.
Lg. | Threading | Min. Thread Lg. | For Hole Dia. | For Panel Thk. | Temp. Range, ° F | Flammability Rating | For Screw Size | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nylon 6/6 | ||||||||||||
| 1/4" | Partially Threaded | 13/64" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N11 | 00000 | ||
| 3/8" | Partially Threaded | 5/16" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N12 | 0000 | ||
| 1/2" | Partially Threaded | 5/16" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N13 | 0000 | ||
| 5/8" | Partially Threaded | 5/16" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N14 | 0000 | ||
| 3/4" | Partially Threaded | 5/16" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N15 | 0000 | ||
| 7/8" | Partially Threaded | 5/16" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N16 | 0000 | ||
| 1" | Partially Threaded | 5/16" | 5/32" | 1/16" | -40 to 185 | UL 94 V-0 | No. 6 | 10 | 1839N17 | 0000 | ||
