One leaf mounts around the edge of the door for a secure hold, while the other mounts to the frame. Longer than other entry door hinges, this piano-style hinge runs the entire length of doors for strength and durability. Bearings allow the hinge to open and close doors smoothly. A nonremovable pin deters tampering. Capacity is based on a maximum door size of 4' Wd. × 7' Ht. Cut hinge to size with a hacksaw. The hinge is UL Listed for use with labeled fire doors.

For technical drawings and 3-D models, click on a part number.

To reinforce loose or damaged hinges, mount one of these hinges to the top edge of the pull-side of the door. They are for doors that swing in one direction and are flush with the frame or have up to a 1/8" offset. All hinges have a nonremovable pin to deter tampering. To choose a door mounting location, stand on the push side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.

For technical drawings and 3-D models, click on a part number.

Pivots provide smooth motion at the junction between two T-slotted rails.

Heavy duty pivots have bearings for a longer life than standard pivots. Those with ball bearings are load rated.

Inline/perpendicular pivots provide versatile mounting options. For perpendicular mounting, snap the tabs of the bottom of the pivot with a slotted screwdriver. To install on the end of the rail, tap the end of the rail and align the tabs on the bottom of the pivot with the slot on the rail. Locking inline/perpendicular pivots have a handle that locks in place to position parts or hold doors and lids open.

360° rotation pivots move at any angle adjacent to the rail they are connected to.

For technical drawings and 3-D models, click on a part number.