About Ball and Roller Bearings
More
About Plain Bearings
More
Panel-Mount Oil-Embedded Sleeve Bearings
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. On startup, friction causes the bronze to release a thin layer of oil on the bearing’s surface. Not for use with plastic panels.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| Lg. | Spline OD | For Min. Sheet Metal Thick. | Dynamic Radial Load Capacity | Misalignment Capability | Lubrication | Lubricant | Temperature Range, °F | Each | |
840 Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | |||||||||
| 0.29" | 0.39" | 0.04" | 70 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 000000 |
For 3/16" Shaft Dia. | |||||||||
| 0.4" | 0.55" | 0.04" | 150 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
For 1/4" Shaft Dia. | |||||||||
| 0.4" | 0.55" | 0.04" | 200 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 5/16" Shaft Dia. | |||||||||
| 0.46" | 0.67" | 0.06" | 280 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 3/8" Shaft Dia. | |||||||||
| 0.46" | 0.67" | 0.06" | 340 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 1/2" Shaft Dia. | |||||||||
| 0.64" | 0.87" | 0.06" | 500 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 5/8" Shaft Dia. | |||||||||
| 0.77" | 1.1" | 0.08" | 960 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||
| 0.89" | 1.3" | 0.09" | 1,300 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
For 7/8" Shaft Dia. | |||||||||
| 0.9" | 1.63" | 0.09" | 1,400 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||||
| 0.9" | 1.63" | 0.09" | 1,400 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
Metric 840 Bronze Bearings | |||||||||
For 4mm Shaft Dia. | |||||||||
| 10.2mm | 14mm | 1mm | 125 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 6mm Shaft Dia. | |||||||||
| 10.2mm | 14mm | 1mm | 185 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 8mm Shaft Dia. | |||||||||
| 11.5mm | 17mm | 1.5mm | 280 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 10mm Shaft Dia. | |||||||||
| 11.5mm | 17mm | 1.5mm | 350 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 0000 |
For 12mm Shaft Dia. | |||||||||
| 16.3mm | 22mm | 1.5mm | 510 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
For 20mm Shaft Dia. | |||||||||
| 22.5mm | 33mm | 2.3mm | 1,350 lbs. @ 60 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
Panel-Mount Dry-Running Sleeve Bearings
Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts. They’re often used in areas with tight space restrictions. Install them into sheet metal panels with an air-powered or hydraulic press. They’re not for use in plastic panels. These bearings are self-aligning to compensate for small amounts of shaft misalignment. Made of acetal plastic, they won’t warp or swell when exposed to water, so they’re good for use in washdown environments.
For technical drawings and 3-D models, click on a part number.
| Length | Spline OD | For Minimum Sheet Metal Thickness | Dynamic Radial Load Capacity | Misalignment Capability | Temperature Range, °F | Each | |
Acetal Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 3/16" Shaft Diameter | |||||||
| 0.4" | 0.55" | 0.051" | 38 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 000000 |
For 1/4" Shaft Diameter | |||||||
| 0.4" | 0.55" | 0.051" | 38 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 0000 |
For 5/16" Shaft Diameter | |||||||
| 0.39" | 0.67" | 0.041" | 37 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 0000 |
For 3/8" Shaft Diameter | |||||||
| 0.45" | 0.67" | 0.054" | 42 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 0000 |
For 1/2" Shaft Diameter | |||||||
| 0.65" | 0.87" | 0.054" | 60 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 00000 |
For 5/8" Shaft Diameter | |||||||
| 0.77" | 1.11" | 0.058" | 145 lbs. @ 60 rpm | 5° | -40° to 180° | 0000000 | 00000 |
For 3/4" Shaft Diameter | |||||||
| 0.9" | 1.3" | 0.058" | 170 lbs. @ 60 rpm | 5° | -40° to 180° | 0000000 | 00000 |
Metric Acetal Plastic Bearings | |||||||
For 6mm Shaft Diameter | |||||||
| 10.2mm | 14mm | 1.3mm | 38 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 0000 |
For 8mm Shaft Diameter | |||||||
| 11.5mm | 17.1mm | 1.3mm | 43 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 0000 |
For 10mm Shaft Diameter | |||||||
| 11.4mm | 17.1mm | 1.3mm | 42 lbs. @ 120 rpm | 5° | -40° to 180° | 0000000 | 0000 |
High-Speed Self-Aligning Dry-Running Flanged Sleeve Bearings
Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They’re self-lubricating, so they’ll take on less wear for an increased lifespan. Acetal won’t warp or swell from exposure to water, so these bearings are good for use in washdown environments. These bearings swivel to compensate for a small amount of shaft misalignment. Designed for press-fit installation by hand—no tools required—they don’t need to be fitted into a housing. Mount them into injection-molded panels and mounts, thin sheet metal, or hard non-ductile materials.
For technical drawings and 3-D models, click on a part number.
| For Shaft Diameter | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Misalignment Capability | Color | Temperature Range, °F | Each | |
PTFE-Filled Acetal Plastic Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | 3/8" | 9/16" | 1/32" | 80 lbs. @ 120 rpm | 75 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 000000 |
| 5/16" | 7/16" | 11/16" | 1/32" | 95 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
| 3/8" | 7/16" | 11/16" | 1/32" | 95 lbs. @ 120 rpm | 80 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 0000 |
| 1/2" | 39/64" | 7/8" | 1/32" | 135 lbs. @ 120 rpm | 100 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
| 5/8" | 49/64" | 1 1/8" | 1/32" | 340 lbs. @ 60 rpm | 270 lbs. @ 60 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
| 6mm | 9.6mm | 14.3mm | 0.8mm | 80 lbs. @ 120 rpm | 80 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
| 8mm | 10.8mm | 17.4mm | 0.8mm | 90 lbs. @ 120 rpm | 90 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
| 12mm | 14.9mm | 22.2mm | 0.8mm | 130 lbs. @ 120 rpm | 105 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
Panel-Mount Ball Bearings
Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. Shields keep out dust and contaminants. Not for use in plastic panels.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Min. Sheet Metal Thick. | Wd. | Spline OD | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Shielded | |||||||||||||
| 1/4" | 0.06" | 0.283" | 0.69" | Steel | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 0000000 | 000000 |
| 5/16" | 0.06" | 0.283" | 0.69" | Steel | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 0000000 | 00000 |
| 3/8" | 0.074" | 0.37" | 1" | Steel | 380 | 180 | 36,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 0000000 | 00000 |
| 6mm | 1.5mm | 7.188mm | 17.5mm | Steel | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 0000000 | 00000 |
| 8mm | 1.5mm | 7.188mm | 17.5mm | Steel | 120 | 60 | 40,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 0000000 | 00000 |
| 10mm | 1.9mm | 9.398mm | 25.4mm | Steel | 380 | 180 | 36,000 | Lubricated | 5° | -30° to 250° | ABEC-3 | 0000000 | 00000 |