Metric Roll Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Hole Diameter

Shaft Type

Material

Wall Thickness

Specifications Met

Passivation

Performance

Minimum Hardness

USMCA Qualifying

Double Shear Breaking Strength

DFARS Compliance

RoHS Compliance

REACH Compliance

Finish

Container Features

Number of Pieces

Forward

How can we improve?

541 Products

Shaft Type

Slotted

Squeeze and insert into tight holes to hold parts in place with tension

420 products

Coiled

The best for parts exposed to vibration and shock

121 products

Shaft Type

Tooth Slotted

Interlocking teeth resist pulling forces to keep pins from wiggling out of holes

0 products

Performance

Corrosion Resistant

Resist rust in wet and outdoor environments

150 products

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg., mm	For Hole Dia., mm	Wall Thk., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel





				1 mm Diameter
				4	1	0.2	150	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
				6	1	0.2	150	Rockwell C42	ISO 8752	100	000000000	0000
				8	1	0.2	150	Rockwell C42	ISO 8752	100	000000000	0000



						1.5 mm Diameter
						4	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						5	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						6	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						8	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
						10	1.5 to 1.6	0.3	350	Rockwell C42	ISO 8752	100	000000000	00000
						12	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000



								2 mm Diameter
								4	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
								4	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	0000
								5	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
								5	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								6	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								6	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								8	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								8	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								10	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								10	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								12	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								12	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								14	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	0000
								14	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								16	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								16	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								18	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								18	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								20	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	0000
								20	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000
								22	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
								22	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	0000
								24	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								24	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000
								30	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								30	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000



										2.5 mm Diameter
										5	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
										6	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
										8	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
										10	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
										10	2.5 to 2.6	0.5	950	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
										12	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
										14	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
										14	2.5 to 2.6	0.5	950	Rockwell C42	ISO 8752	100	000000000	0000
										16	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
										18	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
										20	2.5	0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
20										2.5 to 2.6	0.5	950	Rockwell C42	ISO 8752	100	000000000	00000
24	2.5									0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
24	2.5 to 2.6									0.5	950	Rockwell C42	ISO 8752	100	000000000	0000
26	2.5	0.25								530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
30	2.5	0.25	530							Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
30	2.5 to 2.6	0.5	950							Rockwell C42	ISO 8752	100	000000000	00000



		3 mm Diameter
		4	3							0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		4	3 to 3.65	0.6						1,400	Rockwell C42	ISO 8752	200	000000000	00000
		5	3	0.3	780					Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		6	3	0.3	780					Rockwell C42	DIN 7346, ISO 13337	100	000000000	0000
		6	3 to 3.1	0.6	1,400					Rockwell C42	ISO 8752	200	000000000	00000
		8	3	0.3	780					Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		8	3 to 3.1	0.6	1,400					Rockwell C42	ISO 8752	200	000000000	00000
		10	3	0.3	780					Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		10	3 to 3.1	0.6	1,400					Rockwell C42	ISO 8752	200	000000000	00000
		12	3	0.3	780					Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		12	3 to 3.1	0.6	1,400					Rockwell C42	ISO 8752	200	000000000	00000
		14	3	0.3	780	Rockwell C42				DIN 7346, ISO 13337	100	000000000	00000
		14	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			200	000000000	00000
		16	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			100	000000000	00000
		16	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			200	000000000	00000
		18	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			100	000000000	00000
		18	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			200	000000000	00000
		20	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			200	000000000	00000
		22	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	00000
		22	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			100	000000000	0000
		24	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	0000
		24	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			100	000000000	0000
		26	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	00000
		26	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			100	000000000	0000
		28	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	00000
		28	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			100	000000000	0000
		30	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	00000
		30	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			100	000000000	00000
		32	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	0000
		36	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	00000
		36	3 to 3.1	0.6	1,400	Rockwell C42	DIN 1481, ISO 8752			100	000000000	00000
		40	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337			50	000000000	00000
		40	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752			100	000000000	00000



				3.5 mm Diameter
				10	3.5 to 3.65	0.8	2,000			Rockwell C42	ISO 8752	100	000000000	0000
				20	3.5 to 3.65	0.8	2,000			Rockwell C42	ISO 8752	100	000000000	0000
				30	3.5 to 3.65	0.8	2,000			Rockwell C42	ISO 8752	100	000000000	00000



						4 mm Diameter
						6	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
						6	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
						8	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						8	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
						10	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						10	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
						12	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						12	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
						14	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						14	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
						16	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						16	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
						18	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						18	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
						20	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						20	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
						22	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
22						4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
24	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
24	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
26	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
26	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
28	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
30	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
30	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
32	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
32	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
36	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
36	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
40	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
40	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
45	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
45	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
50	4					0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
50	4 to 4.2					0.8	2,500	Rockwell C42	ISO 8752	50	000000000	00000



						5 mm Diameter
						5	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
						6	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
						8	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
						10	5 to 5.2	1	3,900	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
						12	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
						12	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						14	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
						14	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						16	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
						16	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						18	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
						18	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						20	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
						20	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
						22	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		22				5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		24	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		24	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		26	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		26	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		28	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		28	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		30	5	0.5		2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		30	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		32	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		32	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		36	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		36	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		40	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		40	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		45	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		45	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
		50	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		50	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	50	000000000	00000
		60	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		70	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
		80	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000



				6 mm Diameter
				10	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
				12	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				12	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				14	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				14	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				16	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				16	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				18	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				20	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
				20	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				22	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
				24	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				24	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				26	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				26	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				28	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				30	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				30	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
				32	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				36	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
36				6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
40	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
40	6 to 6.2			1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
45	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
45	6 to 6.2			1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
50	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
50	6 to 6.2			1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
55	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
60	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
60	6 to 6.2			1.2	5,800	Rockwell C42	ISO 8752	25	000000000	0000
70	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
80	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
100	6			0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
100	6 to 6.2			1.2	5,800	Rockwell C42	DIN 1481, ISO 8752	10	000000000	00000



				8 mm Diameter
				10	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				12	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				14	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				16	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				18	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				20	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				22	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				22	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
				24	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				26	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				26	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
				28	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				30	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				30	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
				32	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				36	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				40	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				40	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
				45	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				50	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				50	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
				55	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				55	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
		60		8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
		60	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
		65	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
		70	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
		80	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
		100	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		100	8 to 8.25	1.5	9,600	Rockwell C42	DIN 1481, ISO 8752	5	000000000	0000



				10 mm Diameter
				10	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				12	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				14	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				16	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				20	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				22	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				24	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				24	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				26	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				30	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				30	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				36	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				36	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				40	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				40	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				45	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				50	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				50	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				60	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				60	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	10	000000000	00000
				70	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				80	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				80	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	10	000000000	00000
				90	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				100	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
				100	10 to 10.3	2	15,700	Rockwell C42	DIN 1481, ISO 8752	5	000000000	00000



				12 mm Diameter
				10	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				16	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				20	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				24	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				26	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				28	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				30	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				30	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				32	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				36	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				40	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				40	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	10	000000000	00000
				45	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				50	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				50	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				55	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				60	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
				60	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				65	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				70	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				80	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				100	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000



						13 mm Diameter
						10	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
						12	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						14	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
						16	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
						20	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		22				13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		24	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		26	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		28	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		30	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
		36	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		40	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		50	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		70	13			1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000



						16 mm Diameter
						10	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
						12	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
						14	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						16	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						18	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						20	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
						22	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						24	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						26	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						28	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
						30	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						32	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						36	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						40	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						45	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						50	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						55	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
60						16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
70	16					1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
120	16					1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000



						21 mm Diameter
						30	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
						36	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						40	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						45	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						50	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						60	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						85	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000

						Corrosion-Resistant 18-8 Stainless Steel





										1 mm Diameter
										4	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000
										6	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000
										8	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000



										1.5 mm Diameter
										4	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	100	000000000	0000
										5	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	100	000000000	0000
										6	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
										8	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
										10	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
										12	1.5 to 1.6	0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000



												2 mm Diameter
												4	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	100	000000000	0000
												5	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	100	000000000	0000
												6	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
												8	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
												10	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		12										2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		14	2 to 2.1									0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		16	2 to 2.1									0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		18	2 to 2.1									0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		20	2 to 2.1									0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		22	2 to 2.1									0.4	Not Rated	Not Rated	ISO 8752	25	000000000	0000
		24	2 to 2.1									0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		30	2 to 2.1									0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000



												2.5 mm Diameter
												10	2.5 to 2.6	0.5	Not Rated	Not Rated	ISO 8752	25	000000000	0000
												14	2.5 to 2.6	0.5	Not Rated	Not Rated	ISO 8752	25	000000000	0000
												20	2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
												30	2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000



														3 mm Diameter
														4	3 to 3.65	0.6	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														6	3 to 3.1	0.6	Not Rated	Not Rated	ISO 8752	100	000000000	0000
														8	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
														10	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
12														3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
14	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
16	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
18	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
20	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
22	3 to 3.1													0.6	Not Rated	Not Rated	ISO 8752	10	000000000	0000
24	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
26	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
28	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
30	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
40	3 to 3.1													0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000



						3.5 mm Diameter
						10	3.5 to 3.65							0.75	Not Rated	Not Rated	DIN 1481, ISO 8752	50	000000000	00000
						20	3.5 to 3.6	0.7						Not Rated	Not Rated	ISO 8752	50	000000000	0000
						30	3.5 to 3.6	0.7	Not Rated					Not Rated	ISO 8752	50	000000000	0000



								4 mm Diameter
				8				4 to 4.2	0.8					Not Rated	Not Rated	ISO 8752	10	000000000	0000
				10	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				12	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				14	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				16	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				18	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				20	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				22	4 to 4.2			0.8	Not Rated					Not Rated	ISO 8752	10	000000000	0000
				24	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				26	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				30	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				32	4 to 4.2			0.8	Not Rated					Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				36	4 to 4.2			0.8	Not Rated	Not Rated				DIN 1481, ISO 8752	10	000000000	0000
				40	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000
				45	4 to 4.2			0.8	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000
				50	4 to 4.2			0.8	Not Rated	Not Rated	ISO 8752			5	000000000	0000



								5 mm Diameter
								10	5 to 5.2	1	Not Rated			Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								12	5 to 5.2	1	Not Rated			Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								14	5 to 5.2	1	Not Rated			Not Rated	ISO 8752	10	000000000	0000
								16	5 to 5.2	1	Not Rated			Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								18	5 to 5.2	1	Not Rated			Not Rated	ISO 8752	10	000000000	0000
								20	5 to 5.2	1	Not Rated			Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								22	5 to 5.2	1	Not Rated			Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		24						5 to 5.2	1	Not Rated	Not Rated			DIN 1481, ISO 8752	10	000000000	0000
		26	5 to 5.2					1	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000
		28	5 to 5.2					1	Not Rated	Not Rated	ISO 8752			10	000000000	0000
		30	5 to 5.2					1	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000
		32	5 to 5.2					1	Not Rated	Not Rated	ISO 8752			10	000000000	0000
		36	5 to 5.2					1	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000
		40	5 to 5.2					1	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000
		45	5 to 5.2					1	Not Rated	Not Rated	ISO 8752			10	000000000	0000
		50	5 to 5.2					1	Not Rated	Not Rated	DIN 1481, ISO 8752			10	000000000	0000



								6 mm Diameter
								12	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								14	6 to 6.2	1.2	Not Rated	Not Rated	ISO 8752	10	000000000	0000
								16	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								20	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								24	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								26	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								30	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								36	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
								40	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								45	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
								50	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000
								60	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000



	8 mm Diameter
	22								8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
	26								8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
	30								8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
	40								8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000
	50								8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
	55								8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
	60					8 to 8.25			1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
	100					8 to 8.25	1.5		Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000



							10 mm Diameter
							24		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							30		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							36		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							40		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							50		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							60		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							80		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
							100		10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000

Coiled Spring Pins

End View

The best spring pins for joining parts exposed to vibration and shock. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, they flex to conform to holes that aren’t perfectly round.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

	Lg., mm	For Hole Dia., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel





				1 mm Diameter
				4	1.000 to 1.040	130	Rockwell C43	DIN 7343, ISO 8750	50	000000000	000000
				6	1.000 to 1.040	130	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000



						1.5 mm Diameter
						6	1.500 to 1.600	320	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
						8	1.500 to 1.600	320	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
						10	1.600 to 1.700	175	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
						12	1.500 to 1.600	320	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000



								2 mm Diameter
								6	2.000 to 2.100	550	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
								8	2.000 to 2.100	550	Rockwell C41	DIN 7343, ISO 8750	50	000000000	00000
								10	2.000 to 2.100	550	Rockwell C43	ISO 8750	50	000000000	00000
								12	2.000 to 2.100	550	Rockwell C41	DIN 7343, ISO 8750	50	000000000	0000
								14	2.000 to 2.100	550	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
								16	2.000 to 2.100	550	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
								18	2.000 to 2.100	550	Rockwell C41	DIN 7343, ISO 8750	50	000000000	0000



										2.5 mm Diameter
										8	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	0000
										10	2.500 to 2.600	850	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
										12	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	0000
										14	2.600 to 2.700	850	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
										16	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
										20	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000



												3 mm Diameter
												8	3.000 to 3.100	1,200	Rockwell C43	ISO 8750	50	000000000	00000
												10	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
												12	3.000 to 3.100	1,200	Rockwell C43	ISO 8750	50	000000000	00000
												14	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
												16	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
												18	3.000 to 3.100	1,200	Rockwell C43	ISO 8750	25	000000000	00000
												20	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	25	000000000	0000
												26	3.000 to 3.100	1,200	Rockwell C41	DIN 7343, ISO 8750	25	000000000	0000
												30	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	25	000000000	0000



														3.5 mm Diameter
														10	3.500 to 3.600	1,600	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
														20	3.500 to 3.600	1,600	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
														30	3.500 to 3.600	1,600	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000



																4 mm Diameter
																10	4.000 to 4.100	2,100	Rockwell C41	DIN 7343, ISO 8750	25	000000000	0000
																12	4.000 to 4.100	2,100	Rockwell C43	DIN 7343, ISO 8750	25	000000000	0000
																14	4.000 to 4.100	2,100	Rockwell C43	ISO 8750	25	000000000	00000
16																4.000 to 4.100	2,100	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
18	4.000 to 4.100															2,100	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
20	4.000 to 4.200															2,100	Rockwell C41	DIN 7343, ISO 8750	25	000000000	00000
24	4.000 to 4.100	2,100														Rockwell C43	ISO 8750	25	000000000	00000
30	4.000 to 4.100	2,100	Rockwell C43													DIN 7343, ISO 8750	25	000000000	0000
35	4.000 to 4.100	2,100	Rockwell C43													DIN 7343, ISO 8750	25	000000000	00000
40	4.000 to 4.100	2,100	Rockwell C43													ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
50	4.000 to 4.100	2,100	Rockwell C43													ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000



		5 mm Diameter
		10	5.000 to 5.100	3,300	Rockwell C43											ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
		12	5.000 to 5.100	3,300	Rockwell C43											DIN 7343, ISO 8750	25	000000000	0000
		16	5.000 to 5.100	3,300	Rockwell C43											ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
		20	5.000 to 5.100	3,300	Rockwell C43											DIN 7343, ISO 8750	25	000000000	00000
		24	5.000 to 5.100	3,300	Rockwell C43											ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
		30	5.000 to 5.100	3,300	Rockwell C43											DIN 7343, ISO 8750	25	000000000	00000
		35	5.000 to 5.100	3,300	Rockwell C43	DIN 7343, ISO 8750										25	000000000	00000
		40	5.000 to 5.100	3,300	Rockwell C43	DIN 7343, ISO 8750	10									000000000	0000
		50	5.000 to 5.100	3,300	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	10									000000000	00000
		60	5.000 to 5.100	3,300	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	10									000000000	00000



				6 mm Diameter
				16	6.000 to 6.100	4,900	Rockwell C43									DIN 7343, ISO 8750	25	000000000	00000
				20	6.000 to 6.100	4,900	Rockwell C43									DIN 7343, ISO 8750	25	000000000	00000
				24	6.000 to 6.100	4,900	Rockwell C43									DIN 7343, ISO 8750	25	000000000	00000
				30	6.000 to 6.100	4,900	Rockwell C43									DIN 7343, ISO 8750	10	000000000	0000
				35	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750								5	000000000	0000
				40	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	5							000000000	0000
				50	6.200 to 6.500	4,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5							000000000	0000
				60	6.000 to 6.100	4,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5							000000000	0000



						8 mm Diameter
						20	8.000 to 8.300	8,700	Rockwell C41							DIN 7343, ISO 8750	10	000000000	00000
						26	8.000 to 8.300	8,700	Rockwell C41							DIN 7343, ISO 8750	5	000000000	0000
						30	8.000 to 8.200	8,700	Rockwell C43							DIN 7343, ISO 8750	5	000000000	0000
						35	8.000 to 8.200	8,700	Rockwell C43	ISO 8750						5	000000000	00000
						40	8.000 to 8.200	8,700	Rockwell C43	DIN 7343, ISO 8750	5					000000000	0000
						45	8.000 to 8.200	8,700	Rockwell C43	ISO 8750	5					000000000	00000
						50	8.000 to 8.100	8,700	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5					000000000	0000
						60	8.000 to 8.100	8,700	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5					000000000	00000



								10 mm Diameter
								24	10.000 to 10.100	13,900	Rockwell C43					ASME B18.8.3M, ISO 8748	1	000000000	0000
								40	10.000 to 10.100	13,900	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								50	10.300 to 10.800	13,900	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								60	10.000 to 10.100	13,900	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								70	10.000 to 10.100	13,900	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								80	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750				1	000000000	0000
								100	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1			000000000	0000



										12 mm Diameter
										60	12.000 to 12.100	20,000	Rockwell C43			ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000

										Corrosion-Resistant 18-8 Stainless Steel





														1 mm Diameter
														4	1.000 to 1.040	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
														6	1.000 to 1.040	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
														10	1.000 to 1.040	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000



														1.5 mm Diameter
														6	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
														8	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
														10	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
														12	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000



																2 mm Diameter
																6	2.000 to 2.100	400	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
																8	2.000 to 2.100	400	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
		10														2.000 to 2.100	400	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
		12	2.000 to 2.100													400	Not Rated	DIN 7343, ISO 8750	25	000000000	0000
		18	2.000 to 2.100													400	Not Rated	DIN 7343, ISO 8750	25	000000000	00000



																2.5 mm Diameter
																8	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																10	2.500 to 2.600	650	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
																12	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																14	2.500 to 2.600	650	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
																16	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
				20												2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	10	000000000	0000



																3 mm Diameter
																8	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																10	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																12	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																14	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																16	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																18	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
																20	3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
						30										3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	10	000000000	00000



																4 mm Diameter
																12	4.000 to 4.100	1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	0000
																14	4.000 to 4.100	1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	00000
																18	4.200 to 4.400	1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
																20	4.000 to 4.100	1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	00000
																24	4.000 to 4.100	1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	00000
																30	4.000 to 4.100	1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	00000
								35								4.000 to 4.100	1,700	Not Rated	DIN 7343, ISO 8750	10	000000000	00000



																5 mm Diameter
																12	5.000 to 5.100	2,500	Not Rated	DIN 7343, ISO 8750	10	000000000	0000
										20						5.000 to 5.100	2,500	Not Rated	DIN 7343, ISO 8750	10	000000000	00000
										30	5.000 to 5.100					2,500	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
										35	5.000 to 5.100					2,500	Not Rated	DIN 7343, ISO 8750	5	000000000	00000
										40	5.000 to 5.100	2,500				Not Rated	DIN 7343, ISO 8750	5	000000000	00000



												6 mm Diameter
												16	6.000 to 6.100			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	0000
												20	6.000 to 6.100			3,700	Not Rated	DIN 7343, ISO 8750	5	000000000	0000
24												6.000 to 6.100	3,700			Not Rated	DIN 7343, ISO 8750	5	000000000	00000
30	6.000 to 6.100											3,700	Not Rated			DIN 7343, ISO 8750	5	000000000	00000
35	6.000 to 6.100											3,700	Not Rated			DIN 7343, ISO 8750	5	000000000	00000
40	6.000 to 6.100											3,700	Not Rated			DIN 7343, ISO 8750	5	000000000	00000

Slotted Spring Pin Assortments

Keep a range of sizes on hand to secure a variety of parts. Squeeze these pins into holes and they expand slightly, creating tension to stay in place. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Zinc-Plated Spring Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.

	No. of Pieces	Container Type	Specs. Met		Each
Spring Steel


	2 mm to 6 mm Dia.	520	Plastic Box	DIN 1481	000000000	000000

	Zinc-Plated Spring Steel


			2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	000000

			Corrosion-Resistant 18-8 Stainless Steel


					2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	000000

Coiled Spring Pin Assortments

The best spring pins for shock and vibration, these assortments secure a variety of parts. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Pins have a spiral shape that flexes to conform to holes that aren’t perfectly round.

	No. of Pieces	Container Type		Each
Corrosion-Resistant 18-8 Stainless Steel


	1.5 mm to 8 mm Dia.	230	Plastic Box	000000000	0000000