About Paint and Protective Coatings
More
About Structural Adhesives
More
Surface Fillers for Metal
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.
Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.
Use Loctite® Fixmaster Steel Epoxy with a dispensing gun and mixer nozzle to mix as you dispense.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Aluminum Liquid | |||||||||||||||
| PC 3466 | __ | 1 lbs. | Jar, Can | 20 | 24 | Thick Liquid | 5:1 | 60 sq. in. @ 1/4" | -20° to 200° | Gray | __ | Machine, Drill, Tap | Aluminum | 0000000 | 0000000 |
Loctite® Fixmaster Aluminum Putty | |||||||||||||||
| PC 7254 | __ | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 70 sq. in. @ 1/4" | -20° to 200° | Gray | __ | Machine, Drill, Tap | Aluminum | 0000000 | 000000 |
Loctite® Fixmaster Steel Putty | |||||||||||||||
| EA 3471 | __ | 1 lbs. | Jar | 30 | 24 | Thick Liquid | 2.5:1 | 40 sq. in. @ 1/4" | -20° to 220° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
| EA 3473 | __ | 1 lbs. | Jar | 3 | 24 | Paste | 1:1 | 50 sq. in. @ 1/4" | -20° to 190° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
| PC 235642 | __ | 4 lbs. | Can | 30 | 24 | Paste | 2.5:1 | 170 sq. in. @ 1/4" | -20° to 220° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Loctite® Fixmaster Steel Epoxy | |||||||||||||||
| PC 3965 | 1.7 fl. oz. | __ | Cartridge | 3 | 7 | Paste | 1:1 | 57 sq. in. @ 1/4" | -20° to 200° | Gray | __ | Machine, Drill, Sand, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 000000 | 00000 |
Loctite® Fixmaster Stainless Steel Putty | |||||||||||||||
| EA 3476 | __ | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 30 sq. in. @ 1/4" | -20° to 220° | Gray | __ | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Devcon Plastic Steel® Liquid | |||||||||||||||
| 10210 | __ | 1 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
| 10220 | __ | 4 lbs. | Jar, Can | 45 | 16 | Thick Liquid | 9:1 | 200 sq. in. @ 1/4" | -40° to 250° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Plastic Steel® Epoxy | |||||||||||||||
| 52345 | 2 fl. oz. | __ | Tube | 60 | 24 | Thick Liquid | 1:1 | 14 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000 |
| 62345 | 0.8 fl. oz. | __ | Syringe | 60 | 24 | Thick Liquid | 1:1 | 6 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 0000 |
Devcon Plastic Steel® Putty | |||||||||||||||
| 10110 | __ | 1 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 40 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000 |
| 10120 | __ | 4 lbs. | Jar, Can | 45 | 16 | Putty | 9:1 | 190 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
| 10130 | __ | 25 lbs. | Pail, Can | 45 | 16 | Putty | 9:1 | 1200 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 00000000 |
Devcon Plastic Steel® 5 Minute Putty | |||||||||||||||
| 10240 | __ | 1 lbs. | Jar, Can | 5 | 16 | Putty | 1.7:1 | 40 sq. in. @ 1/4" | -40° to 200° | Dark Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000 |
Devcon Bronze Putty | |||||||||||||||
| 10260 | __ | 1 lbs. | Jar, Can | 35 | 16 | Putty | 9:1 | 50 sq. in. @ 1/4" | -40° to 250° | Bronze | __ | Machine, Drill, Sand, Saw, Tap | Brass, Bronze | 00000000 | 000000 |
Devcon Stainless Steel Putty | |||||||||||||||
| 10270 | __ | 1 lbs. | Jar, Can | 60 | 16 | Putty | 11:1 | 50 sq. in. @ 1/4" | -40° to 250° | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Saw, Tap | Stainless Steel | 00000000 | 000000 |
Devcon FasMetal™ Putty | |||||||||||||||
| 10780 | __ | 0.75 lbs. | Jar, Can | 4 | 16 | Putty | 1:1 | 60 sq. in. @ 1/4" | -40° to 250° | Gray | __ | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Surface Fillers | |||||||||||||||
| __ | __ | 4 oz. | Stick | 3 | 24 | Putty | __ | 16 sq. in. @ 1/4" | -40° to 250° | Copper | NSF/ANSI 61 | Drill, Sand, Saw | Brass, Bronze, Copper | 0000000 | 00000 |
| __ | __ | 4 oz. | Stick | 3 | 24 | Putty | __ | 16 sq. in. @ 1/4" | -40° to 250° | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 00000 |
| __ | __ | 16 oz. | Stick | 45 | 24 | Putty | __ | 64 sq. in. @ 1/4" | -40° to 250° | Off-White | __ | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 00000 |
High-Temperature Surface Fillers for Metal
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Surface fillers in a syringe come with everything you need to make repairs.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | |||||||||||||
| __ | 4 | Stick | 90 min. | 72 | Putty | __ | 16 sq. in. @ 1/4" | -40° to 450° | Gold | Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
| 1.5 | __ | Syringe | 20 min. | 24 | Putty | 9.1:1 | 1 sq. in. @ 1/4" | -40° to 500° | Gray | Machine, Drill, Saw | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass | 0000000 | 00000 |
| 16 | __ | Can, Bottle | 20 min. | 24 | Putty | 9.1:1 | 10 sq. in. @ 1/4" | Not Rated to 500° | Gray | Machine, Drill, Saw | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass | 0000000 | 00000 |
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||
| PC 7222 | 1 | Jar | 30 | 24 | Putty | 2:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Loctite® Nordbak Pneu-Wear | |||||||||||||||
| PC 7317 | 3 | Can | 30 | 6 | Paste | 4:1 | 150 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
| PC 7317 | 25 | Pail, Can | 30 | 6 | Paste | 4:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
| PC 7455 | 6 | Can | 10 | 3 | Paste | 2:1 | 310 sq. in. @ 1/4" | 1/4" | Yes | -20° to 220° | Blue | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
Large-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Wearing Compound | ||||||||||||||
| PC 7218 | 5 | Jar, Can | 30 | 7 | Paste | 2:1 | 260 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
| PC 7218 | 25 | Pail, Can | 30 | 7 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
| PC 7357 | 6 | Jar, Can | 25 | 8 | Paste | 2:1 | 310 sq. in. @ 1/4" | 1/4" | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
| PC 9599 | 6 | Jar, Can | 10 | 3 | Paste | 2:1 | 310 sq. in. @ 1/4" | 1/4" | -20° to 220° | Blue | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
Impact-Resistant Surface Fillers for Metal
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak High Impact Wearing Compound | |||||||||||||||
| PC 9313 | 25 | Pail, Can | 30 | 6 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Chemical-Resistant Surface Fillers for Metal
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Superior Metal | ||||||||||||||||
| EA 3478 | __ | 1 | Jar | 20 | 24 hrs. | Paste | 4:1 | 30 sq. in. @ 1/4" | 1" | Yes | -20° to 250° | Gray | Machine, Drill | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Devcon Titanium Putty | ||||||||||||||||
| 10760 | __ | 1 | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 40 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 0000000 | 000000 |
| 10770 | __ | 2 | Jar | 20 | 16 hrs. | Putty | 4.3:1 | 90 sq. in. @ 1/4" | 3/4" | Yes | -40° to 350° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 00000000 | 000000 |
Surface Fillers | ||||||||||||||||
| __ | 6.5 | __ | Tube | 3 | 5 hrs. | Paste | 1:1 | 25 sq. in. @ 1/4" | 1/2" | Yes | -40° to 200° | Gray | Machine, Drill, Sand, Tap | Aluminum | 000000 | 00000 |
| __ | 11 | __ | Tube | 25 | 7 days | Paste | 1:1 | 50 sq. in. @ 1/4" | 1/4" | Yes | -55° to 180° | Silver | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Steel, Cast Iron, Titanium | 0000000 | 00000 |
Conductive Surface Filler Pens for Electronics
Dispense ready-to-use conductive liquid to fill pits and small gaps on circuit board components. These pens are also used to sketch and repair conductive pathways.
Product labeling requirements restrict sales to the listed areas.
Silver epoxy pens are the most versatile—use them for any type of repair as well as for repairs that require excellent conductivity, such as connecting through holes on circuit boards without adding jumpers, wiring, or solder. Since they have the lowest surface resistivity, they allow the most current to pass.
Tip | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Dia. | Shape | Begins to Harden, min. | Reaches Full Strength | Surface Resistivity, ohms/sq. | Consistency | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | For Use On | Cannot Be Sold To | Each | |
Silver Epoxy | ||||||||||||||
| 0.2 | 0.03" | Point | 3 | 60 min. | 0.050 | Thin Liquid | Not Rated | No | -65° to 300° | Silver | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | Outside United States and Canada | 0000000 | 000000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. They come as two parts. The size listed is the combined total of the two parts.
Volume resistivity measures how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | Temp. Range, °F | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Mix Ratio | Min. | Max. | For Use On | Each | |
Loctite® Surface Fillers | |||||||||||||
| 3888 | __ | 0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 1.44 | 0.001 | 100:6 | -40° | 170° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic | 0000000 | 000000 |
Surface Fillers | |||||||||||||
| __ | __ | 0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 00000 |
| __ | __ | 0.35 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
| __ | 0.5 | __ | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | 1:1 | Not Rated | 300° | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |
| __ | 1 | __ | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | 1:1 | Not Rated | 300° | Aluminum, Brass, Copper, Steel, Stainless Steel | 0000000 | 000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Aluminum Liquid, Devcon Aluminum Putty, and Devcon FasMetal™ 10 HVAC Repair form a nonrusting finish.
Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | |||||||||||||||
| EA 445 | __ | 0.12 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 445 | __ | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 9131 | __ | 0.12 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
| Each | |||||||||||||||
Devcon Aluminum Liquid | |||||||||||||||
| 10710 | __ | 1 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
| 10720 | __ | 3 lbs. | Jar | 75 | 16 hrs. | Thick Liquid | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon Aluminum Putty | |||||||||||||||
| 10610 | __ | 1 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 70 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
| 10620 | __ | 3 lbs. | Jar | 60 | 16 hrs. | Putty | 9:1 | 210 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 000000 |
Devcon FasMetal™ 10 HVAC Repair | |||||||||||||||
| 19770 | 6.5 fl. oz. | __ | Tube | 60 | 16 hrs. | Paste | 1:1 | 30 sq. in. @ 1/4" | -40° to 250° | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | __ | 00000000 | 00000 |
Devcon Metal Patch & Fill | |||||||||||||||
| S-50 | 3 fl. oz. | __ | Tube | 20 | 6 hrs. | Paste | __ | 6 sq. in. @ 1/4" | 40° to 400° | Gray | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass | __ | 00000000 | 0000 |
Pourable Surface Fillers
Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Steel Liquid | |||||||||||||||
| EA 3472 | 1 | Can | 25 | 24 | Thick Liquid | 4:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 0000000 |
| EA 3472 | 4 | Can | 25 | 24 | Thick Liquid | 4:1 | 200 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 000000 |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Specifications Met | Each | |
Loctite® Fixmaster Metal Magic Steel | ||||||||||||||
| EA 3463 | 4 | Stick | 3 | 24 hrs. | Putty | 10 sq. in. @ 1/4" | 1" | -20° to 250° | Gray | Sand | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | NSF/ANSI 61 | 0000000 | 000000 |
Loctite® Fixmaster Underwater Repair Epoxy | ||||||||||||||
| EA 9490 | 4 | Stick | 15 | 60 min. | Putty | 16 sq. in. @ 1/4" | 1/4" | Not Rated to 300° | White | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood | __ | 0000000 | 00000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Max. Temperature, °F | For Joining | Each | |
| Cold-Weld | 8265-S | 2 | Tube | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (300,000 cP) | 550° | Metal, Plastic, Rubber, Masonry, Wood | 0000000 | 00000 |
| Cold-Weld | 8281 | 10 | Tube | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (300,000 cP) | 550° | Metal, Plastic, Rubber, Masonry, Wood | 0000000 | 00000 |
| Original | 50165 | 0.85 | Syringe | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (150,000 cP) | 550° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 0000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| KwikWeld | 8271 | 10 | Tube | 6 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
| KwikWeld | 8276 | 2 | Tube | 2 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
Metal-Reinforced Epoxy Structural Adhesives
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Slice off your required amount, then knead it together to form a moldable adhesive.
Mfr. Model | Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| SteelStik | 8267 | 2 | Stick | 5 min. | 60 min. | 900 | Not Rated | Not Rated | -20° to 300° | Gray | Metal, Rubber, Composites, Masonry | 000000 | 00000 |
Conductive Adhesives for Electronics
An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.
Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, oz. | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Surface Resistivity, ohms-cm | Mix Ratio | Consistency | Temp. Range, °F | For Joining | Each | |
One-Time-Use Packet | |||||||||||
| __ | 0.09 | 3 hrs. | 24 hrs. | 1.55 | 0.05 | 1:1.15 | Paste | -75° to 230° | Ceramic, Glass, Metal | 0000000 | 000000 |
Can | |||||||||||
| 0.5 | __ | 4 hrs. | 5 days | 7.93 | 0.0004 | 1:1 | Paste | 80° to 265° | Metal | 0000000 | 000000 |
| 1 | __ | 4 hrs. | 5 days | 7.93 | 0.0004 | 1:1 | Paste | 80° to 265° | Metal | 0000000 | 000000 |
Stainless Steel/Epoxy Coatings for Metal
These two-part epoxy coatings resist chemicals and other solvents. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts. These coatings cannot be sold to the listed jurisdictions due to volatile organic compound (VOC) regulations.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, qt. | Composition | Touch, hrs. | Overall, hrs. | Approximate Coverage @ Thickness | Application Time After Mixing, hrs. | Maximum Temperature, °F | Application Temperature Range, °F | For Use On | Color (Appearance) | Cannot Be Sold To | Each | |
| 2 | Solvent Based | 2 | 36 | 92 sq. ft. @ 3 mil | 6 | 250° | 50° to 100° | Steel, Iron | Silver (Satin) | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 0000000 |
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, qt. | Composition | Touch, hrs. | Overall, hrs. | Approximate Coverage @ Thickness | Application Time After Mixing, hrs. | Maximum Temperature, °F | Application Temperature Range, °F | For Use On | Color (Appearance) | Cannot Be Sold To | Each | |
| 2 | Solvent Based | 2 | 12 | 107 sq. ft. @ 3 mil | 6 | 250° | 50° to 100° | Steel, Iron | Gray (Matte) | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 0000000 |
Heavy Duty EMI/RFI Shielding Coatings for Electronics
Coat electronics for durability in tough conditions while blocking EMI/RFI signals. Made of epoxy mixed with silver-coated copper, these coatings are stronger than acrylic EMI/RFI coatings. They are rigid enough to withstand the wear of access panels and industrial cabinets. You can also use them in engine compartments because they resist damage from high temperatures and chemicals. Also known as conductive paint, they shield your parts from interference that could cause circuit malfunction and data loss. Mix the two parts of these compounds together and paint them on components. These coatings cannot be sold to Canada due to product labeling requirements.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Interference Reduction @ Frequency | Surface Resistivity | Temperature Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Cannot Be Sold To | Each | |
| 27 | Thin Liquid | 5 | 4 | 55 dB @ 1 GHz | 0.31 ohms/sq. | -40° to 245° | 4 hrs. @ 150° F | Aluminum, Steel, Stainless Steel, Ceramic, Glass, Plastic, Chrome, Galvanized Steel | Brown | Canada | 0000000 | 0000000 |