Filter by
DFARS Compliance
Weld-On Elevating Steps
Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place. Maximum cut length is 24". Steps are serrated for maximum slip resistance. They must be welded at each end with welds able to support the rated capacity.
Overall | ||||||
|---|---|---|---|---|---|---|
| Ht. (A) | Dp. (C) | Material | Capacity | Step Tread | Each | |
17" Wd. (B) | ||||||
| 1 1/4" | 1 1/8" | Steel | 540 lbs. | Serrated | 000000 | 000000 |
| 1 1/4" | 1 1/8" | 304 Stainless Steel | 540 lbs. | Serrated | 0000000 | 00000 |
| 1 1/4" | 1 7/8" | Steel | 540 lbs. | Serrated | 000000 | 00000 |
| 1 1/2" | 2" | Aluminum | 540 lbs. | Serrated | 0000000 | 00000 |
7-ft. Wd. (B) | ||||||
| 1 1/4" | 1 1/8" | Steel | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 0000000 | 000000 |
| 1 1/4" | 1 1/8" | 304 Stainless Steel | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 000000 | 000000 |
| 1 1/4" | 1 7/8" | Steel | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 000000 | 000000 |
| 1 1/2" | 2" | Aluminum | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 0000000 | 000000 |
20-ft. Wd. (B) | ||||||
| 1 1/4" | 1 1/8" | Steel | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 000000 | 000000 |
| 1 1/4" | 1 7/8" | Steel | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 000000 | 000000 |
| 1 1/2" | 2" | Aluminum | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | Serrated | 0000000 | 000000 |
Fold-Up Elevating Steps
1
2
3
Flip these steps down when you need them and fold them up out of the way when you don't.
Overall | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Wd. | Dp. | Tread | Projection | Wt., lbs. | Material | Cap., lbs. | Mounting Hardware Included | No. of | Dia. | Ctr.-to-Ctr. Ht. | Ctr.-to-Ctr. Wd. | Each | ||
| 1 | 3 3/8" | 2 3/8" | 5 5/8" | 1" | 4 1/4" | Serrated | 5 5/8" | 1 | 304 Stainless Steel | Not Rated | No | 4 | 3/16" | 2 5/8" | 1 3/4" | 0000000 | 000000 |
| 2 | 4 1/4" | 1 5/8" | 3 1/2" | 3 1/4" | 2" | Diamond Plate | 3 1/2" | 2 | Chrome-Plated Brass | Not Rated | No | 2 | 1/4" | 3 3/8" | __ | 0000000 | 00000 |
| 2 | 4 3/8" | 1 7/8" | 3 1/2" | 3 3/8" | 2" | Diamond Plate | 3 1/2" | 1 | 316 Stainless Steel | Not Rated | No | 2 | 5/16" | 3 5/8" | __ | 0000000 | 00000 |
| 3 | 4" | 15 1/4" | 10 1/8" | 14 1/4" | 9 1/2" | Serrated | 9 1/2" | 11 | Powder-Coated Steel | 350 | No | 2 | 9/16" | __ | 13" | 0000000 | 000000 |
Antislip Step Covers
Weld these covers to the rungs of your wall and tank ladders for excellent slip resistance. Covers fit square and round rungs. Can be cut with a hand grinder or miter saw using a masonry blade.
Strut Channel Handles
Handle Shown Installed
Handle
Mount between two strut channels to create a handhold. Made of zinc-plated steel, these handles resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||
|---|---|---|---|---|---|---|
| Lg. | Ht. | No. of | Dia. | Mounting Fasteners Included | Each | |
For 1 5/8" Channel Wd. | ||||||
Zinc-Plated Steel | ||||||
| 13 5/8" | 1 5/8" | 2 | 9/16" | No | 0000000 | 000000 |