Typically used with medium- to high-pressure stainless steel threaded pipe fittings.

Also known as Code 61 SAE hydraulic flanges.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Use these heavy duty forged flanges for high-pressure applications.

Typically used with extreme-pressure stainless steel unthreaded pipe fittings.

Typically used with high-pressure iron and steel threaded pipe fittings. Also known as Schedule 160.

Also known as Code 61 SAE hydraulic flanges.

The heavy duty caps and plugs in these assortments come in various sizes and stand up to high-pressure flow applications. Made of steel, they’re for use in noncorrosive environments.

Typically used with high-pressure galvanized iron and steel threaded pipe fittings. Also known as Schedule 160.

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

Typically used with extreme-pressure iron and steel threaded pipe fittings. Also known as Schedule XXH.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Typically used with thick-wall and high-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 80.

Typically used with extreme-pressure iron and steel unthreaded pipe fittings. Pipe is also known as Schedule XXH .

When you're unsure of the exact thread type you need, these fittings have universal threads that are compatible with the most common ones (NPT, NPTF, BSPP, BSPT).

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

Designed for ultra-clean environments, these manifolds are cleaned, dried, and vacuum sealed in plastic to prevent dirt and moisture from contaminating the inside. Use them to distribute air or fluid to multiple locations from a single supply source. Also known as headers.

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

With outlets on the side instead of on top, these manifolds have a lower profile than rectangular manifolds and fit well in cramped spaces. Use them to distribute air or fluid to three locations from a single supply source.

A great solution when space is at a premium, these manifolds are less than an inch in height, yet allow you to supply up to 12 lines from one distribution point.

Joints are for one-way flow and are meant to be used in pairs—one joint serves as the supply line while the other serves as the return line.

Connect different pipe sizes in your line while adding a point of flexibility between them. These expansion joints absorb movement between two connected pipes to reduce stress, vibration, and noise.

Use in medium-pressure applications up to 600 psi.

These junction blocks have threaded holes that allow air or fluid to flow at a 90° angle through the block. Use them to organize and separate multiple lines in your system.

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings.

The sleeve in these fittings is rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal.

Repair leaks in copper tubing.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Use with soft plastic tubing to prevent the tube from collapsing.

For applications that require an extra level of cleanliness, these fittings are individually bagged to prevent contamination.

Use at pressures up to 4,300 psi.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

The flat face of the fitting connects to a tube adapter so you can slide the tubing and fitting sideways to disconnect in cramped spaces. They are also known zero-clearance fittings.

The external hex bolt on these fittings allows for easy installation in cramped spaces.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

The external hex bolt on these fittings allows for easy installation in cramped spaces. They are also known as banjo-style fittings and JIC (Joint Industrial Council) fittings. They provide a tight seal on tubing that is flared to 37°.

These Monel fittings have the corrosion resistance to handle hydrofluoric and sulfuric acid. Also known as instrumentation fittings, they include a nut with two sleeves.

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.

Crimp these fittings onto hydraulic hose for a permanent, leak-tight connection. Since they crimp on, they handle higher pressure than screw-on fittings.

Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these couplings at pressures up to 7,200 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with International Standard ISO Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these dust caps and plugs to keep contaminants out of your hose line.

Use these couplings at pressures up to 5,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO A-shape plugs and sockets.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. Also known as dry disconnects and double shut-off couplings, they have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting your hose line.

Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line.

Built with ball bearings, these fittings continuously swivel 360° before and after installation to prevent your hose from twisting, kinking, and failing. They’re made of 316 stainless steel, so they won’t corrode from a wide variety of chemicals, as well as fuels, gasoline, and oil.

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Check pressure without permanently installing a gauge.