Filter by
Mounting Screw Size
About Hinges
More
Wraparound Full-Length Entry Door Hinges
One leaf mounts around the edge of the door for a secure hold, while the other mounts to the frame. Longer than other entry door hinges, this piano-style hinge runs the entire length of doors for strength and durability. Bearings allow the hinge to open and close doors smoothly. A nonremovable pin deters tampering. Capacity is based on a maximum door size of 4' Wd. × 7' Ht. Cut hinge to size with a hacksaw. The hinge is UL Listed for use with labeled fire doors.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | For Door Thick. | Pin Dia. | Pin Material | Specifications Met | Mounting Fasteners Included | Each | |
304 Stainless Steel—Dull | ||||||||||||||
| 83" | 2 1/4" | 83" | 2 1/4" | 4 1/2" | 0.078" | 180° | 600 | 1 3/4" | 3/16" | 304 Stainless Steel | UL Listed, ANSI A156.26 Grade 1 | Yes | 00000000 | 0000000 |
Tamper-Resistant Full-Length Entry Door Hinges
A snap-on cover protects these hinges from tampering and creates a finished appearance. Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability. Capacity is based on a maximum door size of 4' Wd. × 7' Ht.
For technical drawings and 3-D models, click on a part number.
Full-Length Entry Door Hinges
Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability. Bearings allow the hinges to open and close doors smoothly. All hinges have a nonremovable pin to deter tampering. Capacity is based on a maximum door size of 4' Wd. × 7' Ht. Cut hinges to size with a hacksaw. These hinges are UL Listed for use with labeled fire doors.
304 stainless steel hinges are more corrosion resistant than zinc-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Pin Material | Specifications Met | Mounting Fasteners Included | Each | |
Zinc-Plated Low-Carbon Steel—Dull | |||||||||||||
| 83" | 1 11/16" | 83" | 2 5/16" | 4" | 0.075" | 180° | 600 | 3/16" | Steel | UL Listed, ANSI A156.26 Grade 1 | Yes | 00000000 | 0000000 |
304 Stainless Steel—Dull | |||||||||||||
| 83" | 1 11/16" | 83" | 2 5/16" | 4" | 0.078" | 180° | 600 | 3/16" | 304 Stainless Steel | UL Listed, ANSI A156.26 Grade 1 | Yes | 00000000 | 000000 |
Piano Hinges with Holes
Longer than other hinges, piano hinges run the entire length of doors and lids for strength and durability. These hinges have a standard clearance—when they are closed, the distance between the leaves is about the same as the pin diameter.
Brass as well as zinc-, brass-, chrome-, and nickel-plated low-carbon steel hinges have better corrosion resistance than painted and primed low-carbon steel.
304 stainless steel hinges are more corrosion resistant than brass as well as zinc-, brass-, bronze-, chrome-, and nickel-plated low-carbon steel. They also have good chemical resistance.
316 stainless steel hinges have excellent resistance to chemicals and salt water.
Aluminum hinges are about half the weight of brass and low-carbon steel. They have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.025" Leaf Thick. | ||||||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 3 | 82° | 0000000 | |||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | |||||
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 3" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 4" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 5" | 1/4" | Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
Black-Primed Low-Carbon Steel
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 6 ft. | |
0.04" Leaf Thick. | ||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 0000000 | |||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||
0.06" Leaf Thick. | ||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||
Zinc-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
Nickel-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | Each | |
1 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 5 | 82° | 00000000 | 000000 |
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
3 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 3/4" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | 00000 |
4 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.06" Leaf Thick. | ||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 000000 | 00000 |
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 000000 | 00000 |
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
6 ft. | ||||||||||
0.03" Leaf Thick. | ||||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.04" Leaf Thick. | ||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | 00000 |
0.06" Leaf Thick. | ||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | 00000 |
Brass-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 4 ft. | 6 ft. | |
0.04" Leaf Thick. | |||||||||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
0.06" Leaf Thick. | |||||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
Chrome-Plated Low-Carbon Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 4 ft. | 6 ft. | |
0.04" Leaf Thick. | |||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 00000000 | ||
0.06" Leaf Thick. | |||||||||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | ||
Black Powder-Coated Low-Carbon Steel
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.03" Leaf Thick. | ||||||||||||||
| 1" | 1/16" | Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | |||||
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | |||||
| 1 1/4" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | |||||
| 1 1/2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 3/32" | Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 00000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 1 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2 1/2" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 3" | 1/8" | Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 3" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 4" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 5" | 1/4" | Steel | 2" | 0.430" | 270° | No | No. 6 | 82° | 00000000 | |||||
304 Stainless Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.025" Leaf Thick. | ||||||||||||||
| 3/4" | 1/16" | 304 Stainless Steel | 1/4" | 0.113" | 270° | No | No. 3 | 82° | 0000000 | |||||
| 1" | 1/16" | 304 Stainless Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 0000000 | |||||
0.042" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/4" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 2" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 4 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 1 1/2" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 3" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 4" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 5" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
304 Stainless Steel—Polished
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.025" Leaf Thick. | ||||||||||||||
| 3/4" | 1/16" | 304 Stainless Steel | 1/4" | 0.113" | 270° | No | No. 3 | 82° | 00000000 | |||||
| 1" | 1/16" | 304 Stainless Steel | 1/4" | 0.113" | 270° | No | No. 4 | 82° | 00000000 | |||||
0.042" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 5 | 82° | 00000000 | |||||
| 1 1/4" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 5 | 82° | 00000000 | |||||
| 1 1/2" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2" | 3/32" | 304 Stainless Steel | 1/2" | 0.178" | 270° | No | No. 6 | 82° | 00000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/2" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
| 2" | 1/8" | 304 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 00000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 3" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 4" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
| 5" | 1/4" | 304 Stainless Steel | 1" | 0.430" | 270° | No | No. 10 | 82° | 00000000 | |||||
316 Stainless Steel—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/4" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 1 1/2" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 3" | 1/4" | 316 Stainless Steel | 1" | 0.450" | 270° | No | No. 10 | 82° | 0000000 | |||||
316 Stainless Steel—Polished
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/4" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 5 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 3/32" | 316 Stainless Steel | 1/2" | 0.174" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/4" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 1 1/2" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | 316 Stainless Steel | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | 316 Stainless Steel | 1" | 0.450" | 270° | No | No. 10 | 82° | 0000000 | |||||
Aluminum—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | 3003 Aluminum | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/4" | 3/32" | 3003 Aluminum | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | 3003 Aluminum | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/2" | 1/8" | 3003 Aluminum | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | 3003 Aluminum | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | 3003 Aluminum | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | 3003 Aluminum | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 3" | 1/4" | 3003 Aluminum | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 4" | 1/4" | 3003 Aluminum | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
Anodized Aluminum—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | 1 ft. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | |
0.04" Leaf Thick. | ||||||||||||||
| 1 1/16" | 3/32" | 3003 Aluminum | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 1 1/2" | 3/32" | 3003 Aluminum | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
| 2" | 3/32" | 3003 Aluminum | 1/2" | 0.174" | 270° | No | No. 4 | 82° | 0000000 | |||||
0.06" Leaf Thick. | ||||||||||||||
| 1 1/2" | 1/8" | 3003 Aluminum | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 2" | 1/8" | 3003 Aluminum | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
| 3" | 1/8" | 3003 Aluminum | 1/2" | 0.245" | 270° | No | No. 6 | 82° | 0000000 | |||||
0.09" Leaf Thick. | ||||||||||||||
| 2" | 1/4" | 3003 Aluminum | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 3" | 1/4" | 3003 Aluminum | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
| 4" | 1/4" | 3003 Aluminum | 1" | 0.430" | 270° | No | No. 10 | 82° | 0000000 | |||||
Brass—Dull
Standard Clearance
Between
Hinge Leaves
Between
Hinge Leaves
Knuckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| O'all Wd. | Pin Dia. | Pin Material | Lg. | Dia. | Length | Range of Motion | Mounting Fasteners Included | Mounting Screw Size | For Mounting Screw Countersink Angle | Each | |
0.04" Leaf Thick. | |||||||||||
| 1 1/16" | 3/32" | Brass | 1/2" | 0.171" | 6 ft. | 270° | No | No. 4 | 82° | 0000000 | 000000 |
| 1 1/2" | 3/32" | Brass | 1/2" | 0.171" | 6 ft. | 270° | No | No. 4 | 82° | 0000000 | 000000 |
0.06" Leaf Thick. | |||||||||||
| 2" | 1/8" | Brass | 1/2" | 0.249" | 6 ft. | 270° | No | No. 6 | 82° | 0000000 | 000000 |