Make sure your hardness testers are accurately calibrated. Blocks are marked with their corresponding Rockwell hardness and a serial number.

All blocks come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Test hardness right on your production floor. Unlike benchtop testers, these portable ones don’t require you to move large or hard-to-access parts. They use an indenter to measure the hardness of aluminum, brass, and steel. These testers can be used at any angle without affecting accuracy.

For heat-treated material harder than Rockwell C20, use the optional C-scale diamond indenter.

Bring material right to your bench to measure its hardness. These testers use a carbide indenter to take accurate Rockwell hardness readings every time. They come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. With a durable metal body, these testers stand up to many environments, from heat treat facilities to workshops to inspection labs. They show readings on a dial—no need to hook them up to a power source.

These testers come with indenters for different scales, three anvils, four test blocks, and a case to store accessories. Use the included cover to shield them from dust when they’re not in use.

Measure the hardness of flat materials, such as plastic, rubber, and laminate. For more information about durometer scales, please see the bottom of About Rubber.

Style 2 testers have a narrow base for access to confined areas. You can hold them in your hand.

Style 3 testers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Testers with maximum-reading indicator hold the highest reading until reset.

Mount these testers to an optional operating stand (sold separately) to make sure they’re parallel to your sample for accurate readings and repeatability.

Measure the hardness of flat materials with a digital display. For more information about durometer scales, please see the bottom of About Rubber.

These testers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. A maximum-reading indicator holds the highest reading until reset. Use the USB/RS-232 port for direct connection to your PC.

Testers for Shore M durometers take accurate readings on materials as thin as 0.05". Use them to take measurements of areas that are too small for durometer readings with a Shore A scale tester.

Mount the tester to an operating stand (sold separately) to ensure it is perfectly parallel to the sample. This reduces error and gives accurate, repeatable readings.

Test the hardness of thin and irregularly shaped plastic, rubber, and laminate parts, such as O-rings. These testers can be used on products where the surface area is too small for accurate durometer readings with a standard Shore A tester, such as the rounded surface of O-rings. They include O-ring fixtures that hold five standard-sized O-rings in place during testing. These testers are also capable of measuring materials as thin as 0.05″, about the thickness of a credit card. On the display, they’ll show the highest reading until they’re reset. They include a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

Use the included test blocks to practice taking accurate measurements at the right pressure against your workpiece. Send your measurement data directly to your PC using the USB port.

Determine the hardness of very hard steel. To use, slide a test bar into the tester, place the tester on your surface, and hit with a hammer; a steel ball will make an impression. Measure the impression with the 20X microscope and use the computing disc to determine hardness.

Finding your Brinell hardness doesn’t have to be so hard—these scopes scan and measure indents, then calculate the hardness for you. Accurate and efficient, these scopes replace the need for bulky microscopes and manually measuring and calculating hardness. Connect these scopes to your computer and use the included software to see a live image of the indent on your screen. You can zoom in 4X and adjust the focus to capture a wide range of indent diameters. To fine tune the automatic measurement, simply drag your cursor. Use the software to set test parameters, convert the value to other hardness scales, and validate the test results. The software also marks any measurements that fall out of your set specifications. When you’re finished, you can generate a customizable Microsoft Word or Excel report for your records.

Determine the relative hardness of resins, film, lacquer, and paint by testing their resistance to scratches by graphite pencils. The pencils are calibrated to specific lead grades for hardness. The lowest hardness value of the pencil that mars the material is the material’s relative hardness. Flatten the tip of the pencil lead with the included 400 grit sandpaper, then insert the pencil into the tester. As you push the tester over your material, the pencil is dragged across the surface at a constant pressure. These testers are often used in the development of synthetic resins. They meet ASTM D3363 for testing the hardness of coatings.

Quickly test large parts or metal bar stock with our most precise hardness testers. These testers are portable and can be brought to facilities and jobsites to test items that are too large to move. While some hardness testers only work on one type of metal, these testers work on most metals. They have a rebound hammer that bounces back after impact—the distance it rebounds indicates the hardness of your surface. To obtain accurate readings, steel and other hard metals must be at least 1” thick and aluminum and other soft metals must be at least 3” thick.

Convert your measurements between Rockwell, Vickers, Brinell, or Shore hardness ratings. Your readings will show on a backlit digital display so you can test even in low light. Store up to 100 measurements with their built-in memory or transfer the data to your PC using the USB port.

Using ultrasonic vibrations, these testers determine hardness without leaving an indent on hardened materials. They only leave minimal damage on softer metal and work on metal as thin as 0.08”. Use the included test block to determine the right amount of force to apply to your probe. To perform a test, press the diamond tip probe into your material and apply consistent pressure for reliable results. These testers are highly precise and convert measurements between Rockwell, Vickers, and Brinell ratings. Measurements are shown on a backlit digital display, so you can read them even in dark or dimly lit areas. Store up to 2,000 readings with their built-in memory or transfer the data to your PC using the USB port. Small enough to carry, take these testers to your material. Their lithium ion (Li-Ion) battery keeps them running for up to six hours before recharging is required.

NIST calibrated test blocks are included to help you understand how to properly press the probe to your material for an accurate result. The test blocks can also be used to recalibrate the device. These testers must be calibrated to the specific hardness scale and material being tested. They come pre-calibrated with five combinations: aluminum on the Rockwell B scale, brass on the Rockwell B scale, steel on the Rockwell C and B scales, and steel on the Brinell scale.

Test for contaminants before installing water-treatment equipment such as boilers and filters. You can also check your pipes and equipment for improper chemical levels that can cause corrosion and scale buildup, shortening their life.

367-test kits include tests for six common water-quality parameters in boiler systems and cooling towers.

340-test kits include tests for monitoring municipal water, which is often treated with chlorine.

290-test kits include tests that help you monitor well water, which often contains sulfur compounds.

Dip these strips into your liquid to quickly test water conditions. Strips change color to indicate the value reached; match the color of the strip to the color chart on the bottle to interpret the results.

Packs contain nine pieces of tubing, each labeled with its hardness.