Push the plunger to pump water, cleaners, and chemicals.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

Made with PTFE components, these pumps stand up to aggressive chemicals our other drum pumps can't, such as hydrochloric acid, bleach, sodium hydroxide, and methyl ethyl ketone.

Rotate the handle to dispense a continuous flow of liquid.

Since these pumps use suction to draw liquid out of your container, they continue dispensing once you get them started.

Remove liquid from hard‐to‐reach areas with a long, flexible intake tube that extends into deep and hard‐to-access tanks.

These pumps have a discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

Use these pumps in food and beverage applications.

Also known as plunger pumps, these can provide pressures up to 3,000 psi. Use them for washdowns, drain jetting, and other pressurized water-spraying applications.

Connect these pumps to a ram to create a hydraulic jack.

These jacks include extensions for increasing lift height and accessories for prying.

Connect up to four rams and a gauge to a pump. Ram connections have flow-adjustment valves to adjust ram speed, or shut it off to temporarily hold a load.

Use these fittings with hydraulic hose.

Push or pry apart material with these rams by attaching them to a hydraulic pump.

Monitor hydraulic oil pressure levels to guard against overload. These gauges are liquid filled to reduce needle vibration and include an adapter to mount the gauge in line with the hose.

These jacks have a short body to fit in low-clearance spaces.

Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it.

Fit these compact jacks under low-height loads.

Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point.

Mount these jacks to equipment to raise and level it.

Use suction to remove old lubricant from gear boxes and transmissions.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

Dispense grease with the highest-pressure-rated gun we offer.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Dispense small amounts of grease with this compact gun.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Turn a small tube of grease into a dispenser.

Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

Deliver small amounts of grease with only a light push against the lubrication point.