Use this strong chain for binding loads, tie downs, and towing applications.

The twisted links allow this chain to lie flatter than other light duty chain.

This chain is approximately 50% stronger than Grade 30 chain.

With a maximum temperature of 500° F, this chain withstands higher temperatures than other steel chain.

Small, twisted links make this chain the most resistant to tangling and knotting.

The links have smooth sides to prevent the chain from snagging.

Securely tie down items and lock up tools.

Not only is this chain made of hardened steel for cut resistance, it has a nylon sleeve to protect against abrasion.

Also known as ball chain, use this chain to keep tools with machines, keys with chucks, and gas and dust caps with tanks.

Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

Mount these links in a drilled hole to secure small items such as pens. Links can also be attached as the end of a pull chain.

The fitting lets you connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

The chain has flat links that fold back on themselves for maximum flexibility. Use the split ring on one end to hold tags and keys.

A vinyl cover prevents the chain from scratching items that come in contact with it.

The links are trimmed to allow chain to sit closer against a chain wheel or sprocket.

Strong and durable, use this chain for your lifting applications.

The strongest chain grade we offer, it’s approximately 20% stronger than Grade 100 chain and 50% stronger than Grade 80 chain.

Also known as quick links, these links thread closed by hand or with a wrench.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Also known as lap links or repair links.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.

This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.

Made of 316 stainless steel, this is our most corrosion-resistant chain.

Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain.

With oil-embedded bushings and oil-coated pins, this chain is self-lubricating, which means it requires less maintenance than standard ANSI roller chain.

This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.

Made of stainless steel, this chain has excellent corrosion resistance.

Also known as leaf chain and counterbalance chain, this chain is used with pulleys rather than sprockets for low-speed pulling and as counterweight chain for machine tools, elevator and oven doors, and forklift masts.

Made of stainless steel, this chain has excellent corrosion resistance.

These links are made of steel.

Twice as long as standard links, these are designed for use with Double-Pitch ANSI Roller Chain.

Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.

Made of stainless steel, this chain has excellent corrosion resistance.

With self-lubricating pins and bushings, this metric roller chain requires less maintenance than standard roller chain.

This acetal plastic chain is light, quiet, and nonconductive. Its links snap together, so you don't need connecting links.

Hook into your roller chain and use the handle to tighten the jaw until the chain ends are close enough to add or remove a link. Choose from holders with maximum jaw capacity from 1 3/4” to 5”.

Drive out chain pins with a twist of the handle.

In addition to breaking chain, these tools can also rivet chain to increase strength for better performance on high-speed drives.

Minimize friction, reduce noise, and prolong the life of your roller chain. Guides can be cut to the exact length you need.

Use the notched jaws to push the spring-clip off the link.

Place these plastic rulers on links to measure chain wear.

Mount these tensioners directly onto your chain drive. They have adjustable straps that take up slack and apply constant tension.

Precisely apply tension in a straight line by moving the adjustment screw.

Maintain correct drive tension to ensure smooth operation for maximum power and a long service life.

These tensioners range in height from 5 15/32" to 7 25/32".

If none of our standard guards fit your chain or belt system, we'll create one to suit your needs. Guards are steel and fit sprockets up to 48" apart.

Links split in half and snap back together. Use to connect two lengths of chain.

Remove the tops on these three-post barriers to fill the bases with sand or pea gravel for added stability.

Latching hooks allow you to quickly release a load.

Prevent accidental opening of the hook with these locking hooks.

Chain connects trolleys and guides movement along the track. It can be assembled and disassembled without tools, yet its design makes it difficult to disconnect while in use.

Push these trolleys to move material along the conveyor.

Track provides the runway for trolleys in manual and powered systems.

Push to move material along the conveyor.

Track provides the runway for trolleys, carriers, and chain in manual and powered systems.

Also known as sprocket-driven conveyor belting, sprockets drive the belt.

Attach these strips to conveyor frames to reduce friction and abrasion on chain belts.

Idler wheels keep the belt moving and prevent sagging.

These chain pulls are more durable than rope pulls to operate doors, vents, skylights, and overhead equipment.

Operate doors, vents, skylights, and overhead equipment.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

By completely surrounding the cable and hose, these carriers protect them from dirt, chips, and debris.

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Keep chocks in place with this chain, anchor, and quick-attach link.