Glue Stick Adhesives | McMaster-Carr

Filter by

Diameter

Container Type

For Joining

Color

Length

For Use On

Glue Stick Diameter

Shear Strength

Melting Temperature

Maximum Application Temperature

Begins to Harden

Type

Peel Strength

Clarity

Adhesive Type

Formulation

Reaches Full Strength

Consistency

Manufacturer

REACH Compliance

RoHS Compliance

DFARS Compliance

Elongation

Forward

How can we improve?

55 Products

About Structural Adhesives

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds. 3M glue sticks work only with 3M glue guns.

Adhesives that take longer to harden are suited for applications that require some repositioning, because the longer open times allow for more adjustment. For high-volume applications, adhesives with a lower viscosity flow faster than other hot-melt adhesives.

3750LM is FDA compliant 21 CFR 175.105 for use in food packaging.

3750LM, 3762LM, and 3792LM are low-temperature formulations, which work well on delicate or heat-sensitive materials.

3762 and 3762LM are high-tack adhesives; they bond quickly with light pressure.

3M Scotch-Weld Glue
Mfr. Model No.	For 3M Gun Model No.	Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Color	For Joining	Approx. No. of Sticks per lb.		1 lbs.	11 lbs.	22 lbs.
3738	II	1"	3"	50 sec.	24 hrs.	350° to 385°	Thick Liquid	2,875	Beige	Wood	12	00000000	000000	00	0000000
3750	AE II	1/2"	10"	30 sec.	24 hrs.	350° to 385°	Thick Liquid	1,900	Beige	Wood	14	0000000	00000	0000000	00
3750	AE II	1/2"	10"	40 sec.	24 hrs.	350° to 385°	Thick Liquid	1,900	Clear	Wood	14	0000000	00000	000000	00
3750LM	AE II LT	1/2"	12"	25 sec.	24 hrs.	250° to 270°	Thick Liquid	4,000	Beige	Wood	14	0000000	00000	000000	00
3762	II	1"	3"	35 sec.	24 hrs.	350° to 385°	Thick Liquid	1,870	Beige	Cardboard, Wood	12	00000000	00000	00	000000
3762LM	EC, TC/TC-Q LT	5/8"	8"	25 sec.	24 hrs.	250° to 270°	Thick Liquid	4,000	Amber	Cardboard, Plastic, Rubber, Wood	15	0000000	00000	000000	00
3762LM	LT, TC/TC-Q LT	5/8"	2"	25 sec.	24 hrs.	250° to 270°	Thick Liquid	4,000	Amber	Cardboard, Plastic, Rubber, Wood	55	0000000	00000	000000	00
3792LM	EC, TC/TC-Q LT	5/8"	8"	40 sec.	24 hrs.	250° to 270°	Thick Liquid	10,500	Clear	Fabric, Plastic, Rubber, Wood	15	0000000	00000	000000	00
3792LM	LT, TC/TC-Q LT	5/8"	2"	40 sec.	24 hrs.	250° to 270°	Thick Liquid	10,500	Clear	Fabric, Plastic, Rubber, Wood	55	0000000	00000	000000	00

Glue
Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Color	For Joining	Approx. No. of Sticks per lb.		1 lbs.	5 lbs.	25 lbs.
1/4"	4"	60 sec.	24 hrs.	250° to 380°	Thick Liquid	4,400	Clear	Plastic, Rubber, Wood	110	0000000	000000	000000	0000000
7/16"	4"	30 sec.	24 hrs.	Not Rated to 380°	Thick Liquid	3,125	Clear	Ceramic, Glass, Metal, Plastic, Rubber	45	0000000	00000	00000	000000
7/16"	4"	60 sec.	24 hrs.	250° to 380°	Thick Liquid	4,400	Clear	Plastic, Rubber, Wood	45	0000000	00000	00000	000000
7/16"	10"	25 sec.	24 hrs.	325° to 380°	Thick Liquid	3,475	Amber	Ceramic, Glass, Metal, Plastic, Rubber	18	0000000	00000	00000	000000
7/16"	15"	30 sec.	24 hrs.	Not Rated to 380°	Thick Liquid	3,125	Clear	Ceramic, Glass, Metal, Plastic, Rubber	12	0000000	00000	00000	000000
7/16"	15"	60 sec.	24 hrs.	250° to 380°	Thick Liquid	4,400	Clear	Plastic, Rubber, Wood	12	0000000	00000	00000	000000
5/8"	10"	60 sec.	24 hrs.	250° to 380°	Thick Liquid	4,400	Clear	Plastic, Rubber, Wood	10	0000000	00	00000	000000

Fast-Hardening Hot-Melt Glue Sticks

Glue hardens in 15 seconds or less to bond quickly. Made of FDA listed materials, it is suitable for food packaging.

Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Color	Specifications Met	For Joining	Approx. No. of Sticks per lb.		1 lbs.	5 lbs.	25 lbs.
7/16"	4"	15 sec.	24 hrs.	250° to 380°	Thick Liquid	5,000	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	45	0000000	000000	000000	0000000
7/16"	15"	5 sec.	24 hrs.	250° to 300°	Thin Liquid	1,160	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	0000000	00000	00000	000000
7/16"	15"	15 sec.	24 hrs.	250° to 380°	Thick Liquid	5,000	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	0000000	00000	00000	000000
5/8"	10"	15 sec.	24 hrs.	250° to 380°	Thick Liquid	5,000	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	0000000	00	00000	000000

Flexible Hot-Melt Glue Sticks

Remaining flexible after curing, these glue sticks accommodate joint movement. All are FDA compliant 21 CFR 175.105 and suitable for food packaging.

Dia.	Lg.	Begins to Harden	Reaches Full Strength	Application Temp. Range, °F	Consistency	Viscosity, cP	Elongation	Color	Specifications Met	For Joining	Approx. No. of Sticks per lb.		1 lbs.	5 lbs.	25 lbs.
7/16"	10"	60 sec.	24 hrs.	350° to 390°	Thick Liquid	5,375	1,300%	Clear	FDA Compliant 21 CFR 175.105	Ceramic, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	18	0000000	000000	000000	0000000

Urethane Hot-Melt Glue

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Infinity Bond
Mfr. Model No.	Container Size, fl. oz.	Begins to Harden	Reaches Full Strength	Max. Application Temp., °F	Consistency	Viscosity, cP	Shear Strength, lbs./sq. in.	Color	For Joining		Each
MP75	1.76	75 sec.	48 hrs.	250°	Thick Liquid	8,500	900	White	Ceramic, Composites, Masonry, Metal, Plastic, Rubber	0000000	000000
WW30	1.76	30 sec.	48 hrs.	250°	Thick Liquid	8,500	1,360	White	Wood	0000000	00000
WW60	1.76	60 sec.	48 hrs.	250°	Thick Liquid	15,000	1,480	White	Wood	0000000	00000

Optically Clear Reusable Adhesive Gel

Temporarily stabilize objects on flat surfaces with this clear adhesive gel. It removes cleanly from most surfaces with a twist, and it won't dry out so it can be used again.

Container
Size, fl. oz.	Type	Reaches Full Strength	Temp. Range, °F	Color	For Joining		Each
4	Jar	60 min.	-20° to 220°	Clear	Ceramic, Composites, Glass, Masonry, Metal, Rubber	0000000	000000

Glue

Use these glues for general purpose bonding and repairs.

Glue Sticks

Container							Each		Package
Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Max. Temp., °F	Color	For Joining		Each	Pkg. Qty.		Pkg.
0.77	Stick	10 sec.	12 hrs.	150°	Clear	Cardboard, Fabric	00000000	00000	6	00000000	000000

Metal-Reinforced Epoxy Structural Adhesives

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Slice off your required amount, then knead it together to form a moldable adhesive.

Mfr. Model		Container				Strength
Name	No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
SteelStik	8267	2	Stick	5 min.	60 min.	900	Not Rated	Not Rated	-20° to 300°	Gray	Metal, Rubber, Composites, Masonry	000000	00000

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

WaterWeld and 11801, as well as one-time-use packets, can be applied to wet surfaces or under water.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
WaterWeld	8277	2	Stick	25 min.	60 min.	900	Not Rated	Putty (Not Rated)	Not Rated to 300°	Off-White	Salt Spray, Submersible	Metal, Plastic, Rubber, Composites	0000000	00000

Devcon Adhesives

	Container				Strength
Mfr. Model No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
11801	16	Pail	45 min.	24 hrs.	2,600	1:1	Putty	40° to 250°	Gray	Submersible	Metal, Plastic, Composites	00000000	0000000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Max. Temperature, °F	For Joining		Each
Original	50165	0.85	Syringe	4 hrs.	24 hrs.	1,800	Not Rated	1:1	Paste (150,000 cP)	550°	Metal, Plastic, Rubber, Composites, Glass, Masonry	000000	00000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
HighHeat	8297	2	Stick	60 min.	8 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 450°	Gray	Metal, Plastic, Rubber, Composites, Masonry	000000	000000
PlasticWeld	8237	2	Stick	20 min.	24 hrs.	900	Not Rated	Putty (Not Rated)	-20° to 300°	Off-White	Plastic, Rubber, Composites, Masonry	000000	0000

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

50132 works especially well on plastics and composites.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
PlasticWeld	50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (9,000 cP)	-20° to 300°	Yellow	Metal, Plastic, Rubber, Composites, Masonry, Wood	000000	00000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Bonder	50139	0.85	Syringe	15 min.	30 min.	1,000	Not Rated	1:1	Thick Liquid (50,000 cP)	-20° to 250°	Black	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood	000000	00000

3M Hot-Melt Glue Guns

Dispense 3M hot-melt adhesives with these guns. Guns include one tip.

Additional tips are not compatible with model AE II.

Glue Guns

AE II

TC/TC-Q LT

	For Glue Stick
Manufacturer Model No.	Dia.	Lg.	For 3M Glue Stick Model No.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Cord Lg., ft.	Includes		Each
AE II	1/2"	10"	3750	200	120V AC	380°	3	Continuous	6	6	3/32" Diameter Tip	0000000	0000000
TC/TC-Q LT	5/8"	2"	3762LM, 3792LM	150	150V AC	265°	3.5	Continuous	10	8	3/32" Diameter Tip	0000000	000000

Additional Tips

Cone

Use L-tips to close full-overlap cartons.

T-tips dispense two lines of glue to close slotted cartons.

Tips are not compatible with model AE II glue guns.

Cone Tips
For 3M Gun Model No.	Opening ID	Overall Ht.		Each
II, TC/TC-Q LT	3/32"	3/4"	0000000	00000
II, TC/TC-Q LT	1/8"	3/4"	0000000	00000
L-Tips
II, TC/TC-Q LT	5/64"	2"	0000000	00000
T-Tips
II, TC/TC-Q LT	5/64"	1 1/2"	0000000	00000

Converters

Convert glue guns for use with 8" long glue sticks.

		For Glue Stick
For 3M Gun Model No.	Manufacturer Model No.	Dia.	Lg.		Each
TC/TC-Q LT LT	62-9275-9935-7	5/8"	8"	0000000	000000

Nozzles for 3M Hot-Melt Glue Guns

Cone

Use L-tips to close full-overlap cartons.

T-tips dispense two lines of glue to close slotted cartons.

Tips are not compatible with model AE II glue guns.

Cone Tips
For 3M Gun Model No.	Opening ID	Overall Ht.		Each
II, TC/TC-Q LT	3/32"	3/4"	0000000	00000
II, TC/TC-Q LT	1/8"	3/4"	0000000	00000
L-Tips
II, TC/TC-Q LT	5/64"	2"	0000000	00000
T-Tips
II, TC/TC-Q LT	5/64"	1 1/2"	0000000	00000

Electric/Air-Powered 3M Hot-Melt Glue Guns

For use in high-volume production applications, these guns use electric heat to melt the adhesive and compressed air to keep it flowing. Load up to three glue sticks at once. The gun includes one tip; additional tips are sold separately. Use only with 3M glue sticks.

Glue Guns

	For Glue Stick										Air Inlet
Manufacturer Model No.	Dia.	Lg.	For 3M Glue Stick Model No.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Operating Air Pressure, psi	Pipe Size	Thread Type	Gender	Air Hose Lg., ft.	Cord Lg., ft.		Each
II	1"	3"	3738, 3762	500	120V AC	385°	7.5	Continuous	15	50-80	1/8	NPT	Male	8	8	00000000	000000000

Additional Tips


Cone	L
Cone	T

Use L-tips to close full-overlap cartons.

T-tips dispense two lines of glue to close slotted cartons.

Cone Tips
For 3M Gun Model No.	Opening ID	Overall Ht.		Each
II, TC/TC-Q LT	3/32"	3/4"	0000000	00000
II, TC/TC-Q LT	1/8"	3/4"	0000000	00000
L-Tips
II, TC/TC-Q LT	5/64"	2"	0000000	00000
T-Tips
II, TC/TC-Q LT	5/64"	1 1/2"	0000000	00000

Converters for 3M Hot-Melt Glue Guns

Convert glue guns for use with 8" long glue sticks.

		For Glue Stick
For 3M Gun Model No.	Manufacturer Model No.	Dia.	Lg.		Each
TC/TC-Q LT LT	62-9275-9935-7	5/8"	8"	0000000	000000

Hot-Melt Glue Guns

80 Watt

Melt and dispense hot-melt glue sticks for sealing and assembling.

For Glue Stick Dia.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Cord Lg., ft.	Plug Type		Each
7/16", 1/2"	80	120V AC	380°	2.5	Intermittent	3	5	Two Prong	0000000	000000

Mini Hot-Melt Glue Guns

These small guns get into areas larger guns can't.

For Glue Stick Dia.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Cord Lg., ft.	Plug Type	Specifications Met		Each
1/4", 5/16"	10	120V AC	350°	0.5	Intermittent	5	5	Two Prong	UL Listed	00000000	00000

High-Output Hot-Melt Glue Guns

220 Watt

500 Watt

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

For Glue Stick Dia.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Cord Lg., ft.	Plug Type	Includes	Specifications Met		Each
7/16", 1/2"	220	120V AC	380°	7	Continuous	2	7	Three Prong	__	__	00000000	0000000
5/8"	500	120V AC	220°, 256°, 292°, 328°, 364°, 400°	11	Continuous	3	7 1/2	Three Prong	Plastic Case	CSA Certified	0000000	000000

Hot-Melt Glue Guns for Polyurethane Cartridges

For stronger bonds than other hot-melt adhesives, use these guns with polyurethane hot-melt cartridges.

Manufacturer	Wattage, W	Duty Cycle	Warm-Up Time, min.	Includes		Each
Infinity Bond	500	Continuous	13	One cartridge each of Infinity Bond WW60, WW30 and MP75 Base	0000000	0000000

Infinity Bond WW60 Replacement Cartridge—For Joining Wood (1,480 lbs./sq. in. Shear Strength)	Each	000000
Infinity Bond WW30 Replacement Cartridge—For Joining Wood (1,360 lbs./sq. in. Shear Strength)	Each	00000
Infinity Bond MP75 Replacement Cartridge—For Joining Ceramic, Composites, Masonry, Metal, Plastic, Rubber (900 lbs./sq. in. Shear Strength)	Each	00000

Low-Temperature Hot-Melt Glue Guns

Use these guns in heat-sensitive applications and on delicate materials. They have a temperature setting of 250° F.

For Glue Stick Dia.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Cord Lg., ft.	Plug Type	Specifications Met		Each
7/16", 1/2"	100	120V AC	250°	2.5	Intermittent	3	5	Two Prong	CSA Certified	0000000	000000

Motor-Driven Hot-Melt Glue Guns

A motor advances the glue stick for a continuous flow of glue. After releasing the trigger, the gun automatically reverses to prevent drips.

For Glue Stick Dia.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Duty Cycle	Warm-Up Time, min.	Cord Lg., ft.	Plug Type	Includes	Specifications Met		Each
5/8"	800	120V AC	380°	10.8	Continuous	10	7 1/2	Three Prong	Carrying Case	CSA Certified	0000000	0000000

Cordless Hot-Melt Glue Guns

Don't be tethered by a cord—take these guns where they're needed.

Continuous duty guns use electric or battery power to dispense glue. Use a battery adapter (sold separately) with your DeWalt, Makita, or Milwaukee batteries. Intermittent duty guns dispense glue for up to 3 minutes per charge.

Continuous Duty

Intermittent Duty

								Battery
For Glue Stick Dia.	Wattage, W	Voltage	Temp. Setting, °F	Adhesive Output, lbs./hr.	Run Time	Warm-Up Time, min.	Batteries Included	Voltage	Chemistry	Includes	Specifications Met		Each
Continuous Duty Guns
7/16"	60	120V AC	380°	1.5	1 hrs.	8	No	18V	Lithium Ion (Li-Ion)	Carrying Case, Detachable Electric Cord	UL Recognized Component	0000000	000000
Intermittent Duty Guns
7/16", 1/2"	60	120V AC	380°	1	3 min.	5	__	__	__	Charging Base	UL Listed	0000000	00000

Battery Adapters for Continuous Duty Guns

	For Battery
For Manufacturer	Voltage	No.		Each
DeWalt	20V	DCB200, DCB201, DCB203, DCB203BT, DCB204, DCB204BT, DCB205, DCB205BT, DCB206	0000000	000000
Makita	18V	BL1830B, BL1840B, BL1850B, BL1860B	0000000	00000
Milwaukee	18V	48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828, 48-11-1840, 48-11-1841, 48-11-1850, 48-11-1852, 48-11-1860, 48-11-1865	0000000	00000