Reveal leaks, cracks, and contaminants that you wouldn’t find with a typical flashlight. These flashlights use UV light to illuminate fluorescent dyes, particles, and other chemicals.

Make surface defects stand out—these flashlights have a UV light that illuminates fluorescent dyes, particles, and chemicals so you can identify cracks and pores on parts or find leaks in your system. These flashlights also have a white LED bulb that shines a focused, even beam for normal flashlight uses. The head bends up to 90° so you can direct light where you need to when holding them in tight spaces. A strong magnet on the opposite end lets you stick them onto magnetic surfaces for hands-free use.

Detect leaks and contamination while keeping both your hands free. These headlamps use UV light to reveal dyes, particles, and chemicals with fluorescent qualities, making cracks and defects easy to spot. Each headlamp also has a regular LED light to see in dim and dark areas. Both bulbs emit a focused, uniform light beam that works best for close-up inspections.

Headlamps with a motion sensor switch between brightnesses, beam patterns, and bulb types with a wave of your hand. They’re helpful when your gloves are oily or dirty. You can also press a button to switch between these modes. The additional bull’s eye beam pattern has a wide angle to illuminate at a distance.

The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting. These lights cannot be sold to Canada due to local regulations on mercury content.

Shine UV light over large work areas to uncover leaks, cracks, and contaminants. These lights illuminate fluorescent dyes, particles, and other chemicals, making defects easy to spot. Fasten them to a wall or ceiling, so you’ll have both hands free to adjust what you’re inspecting or make repairs.

Lights with ultraviolet LED bulbs last longer, are more efficient, and generate less heat than lights with fluorescent bulbs.

Lights that cannot be sold to the listed areas are restricted due to local regulatory limits on mercury.

For technical drawings and 3-D models, click on a part number.

These lights have two UV bulbs and two fluorescent bulbs that work independently of each other. The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting. Lights and replacement bulbs cannot be sold to the listed areas due to local regulations on mercury content.

This versatile light can be secured in the stand or removed for hand-held use. A switch lets you select between UV and white fluorescent light. These lights cannot be sold to Canada due to local regulations on mercury content.

Catch defects you’d otherwise miss by switching between UV light and white light. The UV LEDs on these microscopes illuminate fluorescent dyes, particles, and chemicals, making leaks and cracks easy to spot. The white LEDs mimic natural daylight for clear, shadow-free inspections of fine details. If you’re working with reflective surfaces, adjust the brightness of the white light to reduce glare. An alternative to borescopes, they're often squeezed into dark, tight spaces. While slim and roughly 4” long, these microscopes can make objects appear up to 220 times larger.

Connect them to a computer to watch a live feed of your inspection and record photos and videos with the included software. The software also lets you measure the object you’re viewing.

Disinfect and sterilize air, water, and surfaces with short wave ultraviolet radiation. Ultraviolet radiation is harmful to skin and eyes; only install bulbs in fixtures that provide adequate protection. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Bulbs cannot be sold to Canada due to import regulations.

Use these lamps for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulatory limits on mercury content.

Wire terminals allow you to connect these bulbs to a power source through a panel. These bulbs are sized to fit into tight spaces such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Ultraviolet LED bulbs are often used to sterilize surfaces, cure adhesives, and detect leaks. Ultraviolet light is invisible to the human eye.

For technical drawings and 3-D models, click on a part number.

Set the lamp on a bench top and the 360° rotating head directs light where you need it. It cannot be sold to Canada due to local regulatory limits on mercury content.

An optional lens filter (sold separately) lets you see extra-fine particles by reducing glare and the output of visible light.

Aim light where it’s needed most in areas that don't have an electrical outlet.

Lights with rechargeable batteries include a USB charging cord.

Style E help you find fluid leaks and detect flaws and contaminants on a surface—they have an ultraviolet light in addition to a white light. Their white light helps you distinguish similar hues. They show color more accurately than most LEDs. Use them where color identification is critical, such as paint inspection and wiring. The base is magnetic, so you can attach them to most metal surfaces, and a hook folds out for hanging. Designed tough, they can withstand a drop from up to 6 feet without breaking.

Lights with daylight light appearance produce white and blue tones, mimicking natural daylight, for a crisp, clear light that’s ideal for inspecting. Lights with a neutral light appearance are commonly used in workspaces.

Lights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Cover large areas with this long lamp. Use for UV curing as well as leak detection, quality control inspection, and testing. They cannot be sold to Canada due to local regulations on mercury content.