We will reply to your message within an hour.
More
Slide these connectors into the ends of duct hose and secure with a clamp.
If you need frequent access to your line, these connectors join with a twist. They are also known as J-lock connectors.
Form elbows and bends with this hose and it will hold its shape without support.
Let go of this hose and it will spring back out of your way.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
If you’re tight on storage space, this hose compresses down to a small size.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Super thin and lightweight, this hose is economical and rolls up for easy disposal.
Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
Bend this hose in any direction and it will hold its shape without support.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
The neoprene coating on this hose holds up under high heat.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
This white hose makes dirt and other contaminants easy to spot.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
The smooth interior prevents dust from getting trapped and building up inside the hose.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
These short lengths of hose have a collar on each end to prevent the clamp from slipping off.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.
Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
Hose meets UL 94 V-2 for flame retardance.
The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.
The neoprene coating on this hose withstands continuous motion without weakening.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
Position this hose in any direction and it will hold its shape.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
Transfer material from sifters, feeders, and strainers to other parts of your sanitary line with these hose lengths and fittings.
Step on or drive over this hose without causing damage.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
Run water, mist, oil, and other liquids through this hose.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.
Add a flexible joint to your system to reduce vibration caused by fans and blowers.