We will reply to your message within an hour.
More
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your ASCO Numatics modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.
Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.
Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.
These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.
Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.
A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.
The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.
Use these filters to extend the service life of air-powered tools and then throw them away when you're done.
Mount these filters to a 35 mm DIN rail with the included brackets.
Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.
An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.
Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.
A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.
Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.
Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.
Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.
Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.
No need to buy and service two filters—these filters have a single element that removes both large and fine particles.
Generate clean air for instrumentation and applications with critical air requirements.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Remove moisture, odors, and particles from your compressed air line before they reach respirators.