Because these trucks tilt and roll like a hand truck they are easier to move than mobile drum dispensing stands. They are suited for long distance moves. Tilt them flat to dispense. Handle grips make the handles more comfortable.

Style A have a hook-style grabber that attaches to the rim of the drum for a secure hold and wedges that slide under the drum for easy loading. When in the dispensing position, rollers on the frame allow you to rotate the drum for mixing. For use with steel drums.

Style B has a polyester strap with spring-loaded cinching buckle to secure the drum, extra-wide load wedges for easy loading, and a kickstand to keep the truck standing. They can be used with fiber, plastic, and steel drums.

Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll over smooth or rough surfaces. Trucks with steel wheels are rugged, but noisy and can damage floors. They work best on smooth surfaces.

Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum and dispense. They are suited for long distance moves and are easier to move than mobile drum dispensing stands. Trucks have a drum saddle with a chain and ratchet-style tightener to secure the drum. A handle lock prevents unintentional lowering and a tilt lock keeps the drum vertical. Release the tilt lock for mixing. The rear swivel caster makes them easy to steer. Their lightweight polypropylene wheels roll best on smooth surfaces.

These corrosion-resistant stainless steel trucks withstand harsh environments and frequent washdowns. Load wedges slide under the drum for easy loading and unloading, and a spring-loaded kickstand keeps the truck standing and adds stability during dispensing. The four polypropylene wheels are suitable for long distance moves on smooth surfaces.

Move a drum where you need it, then dispense. Also known as drum cradles, these stands are an economical way to store, mix, and drain drums. Drum rim catches secure drums and prevent them from slipping out.

Style F has load wedges that slide under the drum for easy loading and cross braces with rollers that let you rotate the drum for draining and mixing in the horizontal position.

Telescoping handles provide leverage and control when tipping a drum to empty.

Skid-resistant surfaces prevent sliding when loading.

Polypropylene and polyethylene wheels are lightweight and roll best on smooth surfaces. Rubber wheels absorb shock, are quiet, and roll over smooth or rough surfaces. Steel and aluminum wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

Note: Length for stands with telescoping handles is with handles in the retracted position.

Also known as drum cradles, these stands are an economical way to store, mix, and drain drums in a single location. The frame has a skid-resistant surface to prevent sliding when loading. A drum rim catch in the base of the frame secures the drum.

Telescoping handle increases leverage when tipping to empty drums.

Note: Length for stand with telescoping handle is with handle in the retracted position.

Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs. A U-shaped platform with a recessed step and molded handles makes loading, unloading, and tipping to dispense easy. A strap secures the drum. In the dispensing position, the drum is held at a slight downward angle for better flow. The sump has two openings with garden hose threads for drainage.

Use trucks with polypropylene wheels on smooth surfaces. Trucks with rubber wheels absorb shock to roll on smooth and rough surfaces. Meets EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Lift, transport, and place drums without a forklift. A V-style base makes it easy to load and unload drums from pallets and platforms. Swivel casters at the back of the truck make them easy to steer.

Trucks with a gas-spring pump handle have a U-shaped lever that engages the gas spring and ratchet mechanism to lift, hold, and release the drum. The length of the handle provides proper leverage, and the base has built-in counterbalance for stability. Hooks securely hold the drum below the rim.

Trucks with a hydraulic pump handle control lifting and lowering of the drum while a claw-style grabber attaches to the rim of the drum for a secure hold.

Trucks with a hydraulic foot pump have a pedal to control lifting and lowering of the drum while a spring-loaded clamp securely grips the rim of the drum. The legs are retractable for easier maneuvering in tight spaces.

Floor locks and wheel brakes keep trucks stationary during lifting and lowering.

Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces.

Maximize stability and minimize spills. These dollies have a large, open platform that sits low to the ground to slide under drums for better support and minimal tipping. A T-handle pivots out for pulling, locks upright for pushing, and folds in for storage. One swivel caster and two axle mounted wheels make these dollies easy to steer. Casters are welded to the frame for strength.

Polypropylene wheels are lightweight and work on smooth surfaces. Rubber tread-on-core wheels have a hard core for strength surrounded by a shock- and sound-absorbing tread for a cushioned ride on all surfaces. Steel wheels are rugged but noisy and can damage floors. They roll best on smooth surfaces.

The platform on this dolly is open in front to make loading and unloading easier while a lip on the other three sides keeps the load from sliding off. A removable handle and a square deck, along with two swivel and two rigid casters make it easy to push, pull, and steer along walls and aisles. The dolly can be used with round drums as well as square cartons and crates. Their phenolic wheels are nonmarking and roll best on smooth surfaces, but can be noisy.

Contain spills when moving and storing drums. Dollies have plastic wheels for use on smooth surfaces.

Dollies with perforated platforms have removable top grating deck for easy cleaning and a drain plug in the base. Wheel brakes prevent dollies from rolling. They meet EPA 40 CFR 264.175 for secondary containment of hazardous waste.

Dollies with two swivel casters and two axle mounted wheels have better steering control.