McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    192 Products

    Clipped Washers
    3D CAD models available

    Clipped on one side, these washers fit in tight spots where your typical round washers can't. Position them against a flat edge, and they won't rotate out of place as you tighten. Washers take the pressure off screws and nuts to protect mounting surfaces.
    Stainless SteelAbout Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Washers. Clipped Washers.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these washers have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to harsh chemicals as well as 316 stainless steel.
    For Screw
    Size
    ID
    OD
    Clipped
    Wd.
    Thk.
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    No. 2
    0.090"0.188"0.168"0.027" to 0.033"10000000000000000
    No. 3
    0.109"0.218"0.190"0.022" to 0.028"1000000000000000
    No. 4
    0.125"0.312"0.264"0.027" to 0.033"1000000000000000
    No. 4
    0.125"0.375"0.312"0.036" to 0.045"1000000000000000
    No. 4
    0.125"0.438"0.359"0.036" to 0.045"1000000000000000
    No. 5
    0.141"0.500"0.430"0.036" to 0.045"1000000000000000
    No. 6
    0.156"0.375"0.312"0.055" to 0.065"1000000000000000
    No. 6
    0.156"0.438"0.360"0.036" to 0.045"1000000000000000
    No. 6
    0.156"0.562"0.484"0.036" to 0.045"1000000000000000
    No. 8
    0.173"0.375"0.320"0.027" to 0.033"1000000000000000
    No. 10
    0.200"0.625"0.500"0.027" to 0.033"1000000000000000
    No. 10
    0.203"0.750"0.648"0.056" to 0.071"1000000000000000
    No. 12
    0.234"0.438"0.387"0.036" to 0.045"1000000000000000
    No. 12
    0.234"0.875"0.757"0.056" to 0.071"50000000000000
    1/4"
    0.254"0.750"0.625"0.044" to 0.052"1000000000000000
    1/4"
    0.281"0.500"0.446"0.056" to 0.071"1000000000000000
    1/4"
    0.281"0.750"0.609"0.056" to 0.071"1000000000000000
    1/4"
    0.281"1.000"0.860"0.056" to 0.071"50000000000000
    5/16"
    0.344"0.688"0.594"0.055" to 0.065"50000000000000
    5/16"
    0.344"0.875"0.702"0.056" to 0.071"50000000000000
    5/16"
    0.344"1.125"0.952"0.056" to 0.071"500000000000000
    3/8"
    0.406"1.000"0.797"0.056" to 0.071"500000000000000
    3/8"
    0.406"1.250"1.040"0.084" to 0.097"10000000000000
    3/8"
    0.444"0.874"0.750"0.055" to 0.065"1000000000000000
    7/16"
    0.469"1.125"0.890"0.056" to 0.071"500000000000000
    7/16"
    0.469"1.500"1.265"0.084" to 0.097"10000000000000
    1/2"
    0.531"1.250"1.075"0.084" to 0.097"10000000000000
    1/2"
    0.531"1.750"1.485"0.084" to 0.097"10000000000000
    1/2"
    0.562"1.375"1.070"0.058" to 0.064"10000000000000
    9/16"
    0.594"1.125"0.995"0.056" to 0.071"500000000000000
    9/16"
    0.594"1.500"1.275"0.084" to 0.097"10000000000000
    9/16"
    0.594"2.000"1.703"0.084" to 0.097"10000000000000
    5/8"
    0.656"1.500"1.220"0.058" to 0.064"10000000000000
    3/4"
    0.812"1.250"1.125"0.058" to 0.064"10000000000000
    3/4"
    0.812"2.000"1.594"0.084" to 0.097"10000000000000
    3/4"
    0.812"2.500"2.093"0.112" to 0.128"100000000000000
    7/8"
    0.940"2.250"1.938"0.058" to 0.064"10000000000000
    1"
    1.032"2.281"1.956"0.058" to 0.064"10000000000000
    1 1/4"
    1.312"2.250"2.015"0.112" to 0.128"100000000000000
    1 1/2"
    1.562"2.750"2.460"0.112" to 0.128"100000000000000
    M2
    2.200 mm4.500 mm3.900 mm0.220 mm to 0.420 mm50000000000000
    M2.5
    2.700 mm6.000 mm5.200 mm0.400 mm to 0.600 mm1000000000000000
    M3
    3.200 mm6.000 mm5.300 mm0.400 mm to 0.600 mm1000000000000000
    M3
    3.200 mm7.000 mm6.100 mm0.400 mm to 0.600 mm1000000000000000
    M3.5
    3.700 mm8.000 mm6.900 mm0.400 mm to 0.600 mm1000000000000000
    M4
    4.300 mm8.000 mm7.100 mm0.400 mm to 0.600 mm1000000000000000
    M4
    4.300 mm9.000 mm7.800 mm0.700 mm to 0.900 mm1000000000000000
    M5
    5.300 mm9.000 mm8.100 mm0.900 mm to 1.100 mm1000000000000000
    M5
    5.300 mm10.000 mm8.800 mm0.900 mm to 1.100 mm1000000000000000
    M5
    5.500 mm18.000 mm14.900 mm0.900 mm to 1.100 mm1000000000000000
    M6
    6.400 mm11.000 mm9.900 mm1.400 mm to 1.800 mm1000000000000000
    M6
    6.400 mm12.000 mm10.600 mm1.400 mm to 1.800 mm1000000000000000
    M6
    6.400 mm17.000 mm14.400 mm1.400 mm to 1.800 mm1000000000000000
    M6
    6.600 mm22.000 mm18.200 mm1.400 mm to 1.800 mm50000000000000
    M8
    8.400 mm15.000 mm13.400 mm1.400 mm to 1.800 mm1000000000000000
    M8
    8.400 mm16.000 mm14.100 mm1.400 mm to 1.800 mm1000000000000000
    M8
    8.400 mm23.000 mm19.400 mm1.400 mm to 1.800 mm50000000000000
    M8
    9.000 mm28.000 mm23.300 mm1.400 mm to 1.800 mm50000000000000
    M10
    10.500 mm18.000 mm16.100 mm1.400 mm to 1.800 mm1000000000000000
    M10
    10.500 mm20.000 mm17.600 mm1.800 mm to 2.200 mm1000000000000000
    M10
    10.500 mm28.000 mm23.600 mm1.400 mm to 1.800 mm50000000000000
    M12
    13.000 mm20.000 mm18.300 mm1.800 mm to 2.200 mm1000000000000000
    M12
    13.000 mm35.000 mm29.500 mm2.100 mm to 2.500 mm10000000000000
     
    Black-Oxide 18-8 Stainless Steel
    No. 6
    0.156"0.375"0.312"0.055" to 0.065"50000000000000
    No. 8
    0.173"0.375"0.320"0.027" to 0.033"50000000000000
    No. 10
    0.200"0.625"0.500"0.027" to 0.033"50000000000000
    1/4"
    0.254"0.750"0.625"0.044" to 0.052"50000000000000
    5/16"
    0.344"0.688"0.594"0.055" to 0.065"500000000000000
     
    Steel
    Image of Product. Front orientation. Contains Annotated. Washers. Clipped Washers.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Black-Oxide Steel—Typically chosen for their appearance, these washers have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    Steel—Best for dry environments since moisture will cause these washers to rust.
    For Screw
    Size
    ID
    OD
    Clipped
    Wd.
    Thk.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    No. 6
    0.156"0.312"0.270"0.028" to 0.036"10000000000000000
    No. 8
    0.188"0.500"0.420"0.036" to 0.045"50000000000000
    No. 10
    0.203"0.406"0.355"0.036" to 0.045"1000000000000000
    No. 10
    0.203"0.750"0.610"0.056" to 0.071"50000000000000
    1/4"
    0.281"0.500"0.450"0.056" to 0.071"50000000000000
    1/4"
    0.281"0.750"0.630"0.056" to 0.071"50000000000000
    1/4"
    0.281"1.000"0.820"0.056" to 0.071"50000000000000
    5/16"
    0.344"0.625"0.550"0.056" to 0.071"50000000000000
    5/16"
    0.344"0.875"0.740"0.056" to 0.071"50000000000000
    5/16"
    0.344"1.125"0.952"0.056" to 0.071"50000000000000
    3/8"
    0.406"0.750"0.664"0.056" to 0.071"50000000000000
    3/8"
    0.406"1.000"0.850"0.056" to 0.071"50000000000000
    3/8"
    0.406"1.250"1.040"0.084" to 0.097"10000000000000
    7/16"
    0.469"1.125"0.961"0.056" to 0.071"50000000000000
    1/2"
    0.531"1.000"0.880"0.056" to 0.071"50000000000000
    1/2"
    0.531"1.250"1.070"0.084" to 0.097"10000000000000
    1/2"
    0.531"1.750"1.485"0.084" to 0.097"10000000000000
    9/16"
    0.594"1.125"0.990"0.056" to 0.071"50000000000000
    9/16"
    0.594"1.500"1.203"0.084" to 0.097"10000000000000
    5/8"
    0.656"1.750"1.422"0.084" to 0.097"10000000000000
    3/4"
    0.812"1.375"1.235"0.084" to 0.097"10000000000000
    3/4"
    0.812"2.000"1.703"0.084" to 0.097"10000000000000
    7/8"
    0.938"1.500"1.360"0.084" to 0.097"10000000000000
    7/8"
    0.938"2.250"1.922"0.084" to 0.097"10000000000000
    M3
    3.200 mm6.000 mm5.300 mm0.400 mm to 0.600 mm1000000000000000
    M4
    4.300 mm8.000 mm7.100 mm0.400 mm to 0.600 mm1000000000000000
    M5
    5.300 mm9.000 mm8.100 mm0.900 mm to 1.100 mm50000000000000
    M5
    5.500 mm18.000 mm14.900 mm0.900 mm to 1.100 mm50000000000000
    M6
    6.400 mm12.000 mm10.600 mm1.400 mm to 1.800 mm50000000000000
    M6
    6.400 mm17.000 mm14.400 mm1.400 mm to 1.800 mm50000000000000
    M6
    6.600 mm22.000 mm18.200 mm1.400 mm to 1.800 mm50000000000000
    M8
    8.400 mm15.000 mm13.400 mm1.400 mm to 1.800 mm50000000000000
    M8
    8.400 mm16.000 mm14.100 mm1.400 mm to 1.800 mm50000000000000
    M8
    8.400 mm23.000 mm19.400 mm1.400 mm to 1.800 mm50000000000000
    M8
    9.000 mm28.000 mm23.300 mm1.400 mm to 1.800 mm50000000000000
    M10
    10.500 mm18.000 mm16.100 mm1.400 mm to 1.800 mm50000000000000
    M10
    10.500 mm28.000 mm23.600 mm1.400 mm to 1.800 mm50000000000000
    M12
    13.000 mm20.000 mm18.300 mm1.800 mm to 2.200 mm50000000000000
    M12
    13.000 mm24.000 mm21.200 mm2.100 mm to 2.500 mm10000000000000
    M16
    17.000 mm30.000 mm26.700 mm2.700 mm to 3.300 mm10000000000000
    M20
    21.000 mm37.000 mm33.000 mm2.700 mm to 3.300 mm10000000000000
     
    Black-Oxide Steel
    No. 4
    0.125"0.250"0.218"0.028" to 0.036"50000000000000
    No. 6
    0.156"0.312"0.270"0.028" to 0.036"50000000000000
    No. 8
    0.188"0.500"0.420"0.036" to 0.045"50000000000000
    No. 10
    0.203"0.406"0.355"0.036" to 0.045"50000000000000
    No. 10
    0.203"0.750"0.610"0.056" to 0.071"50000000000000
    1/4"
    0.281"0.500"0.450"0.056" to 0.071"50000000000000
    1/4"
    0.281"0.750"0.630"0.056" to 0.071"50000000000000
    5/16"
    0.344"0.625"0.550"0.056" to 0.071"50000000000000
    5/16"
    0.344"0.875"0.740"0.056" to 0.071"50000000000000
    5/16"
    0.344"1.125"0.952"0.056" to 0.071"50000000000000
    3/8"
    0.406"0.750"0.664"0.056" to 0.071"50000000000000
    3/8"
    0.406"1.000"0.850"0.056" to 0.071"50000000000000
    3/8"
    0.406"1.250"1.040"0.084" to 0.097"10000000000000
    7/16"
    0.469"1.125"0.961"0.056" to 0.071"50000000000000
    7/16"
    0.469"1.500"1.265"0.084" to 0.097"10000000000000
    1/2"
    0.531"1.000"0.880"0.056" to 0.071"50000000000000
    1/2"
    0.531"1.250"1.070"0.084" to 0.097"10000000000000
    9/16"
    0.594"1.125"0.990"0.056" to 0.071"50000000000000
    5/8"
    0.656"1.750"1.422"0.084" to 0.097"10000000000000
    3/4"
    0.812"1.375"1.235"0.084" to 0.097"10000000000000
    3/4"
    0.812"2.000"1.703"0.084" to 0.097"10000000000000
    1"
    1.062"2.500"2.140"0.112" to 0.128"10000000000000
    M4
    4.300 mm9.000 mm7.800 mm0.700 mm to 0.900 mm50000000000000
    M5
    5.500 mm18.000 mm14.900 mm0.900 mm to 1.100 mm50000000000000
    M6
    6.400 mm11.000 mm9.900 mm1.400 mm to 1.800 mm50000000000000
    M6
    6.400 mm17.000 mm14.400 mm1.400 mm to 1.800 mm50000000000000
    M6
    6.600 mm22.000 mm18.200 mm1.400 mm to 1.800 mm50000000000000
    M8
    8.400 mm23.000 mm19.400 mm1.400 mm to 1.800 mm50000000000000
    M8
    9.000 mm28.000 mm23.300 mm1.400 mm to 1.800 mm50000000000000
    M10
    10.500 mm18.000 mm16.100 mm1.400 mm to 1.800 mm50000000000000
    M10
    10.500 mm20.000 mm17.600 mm1.800 mm to 2.200 mm50000000000000
    M10
    10.500 mm28.000 mm23.600 mm1.400 mm to 1.800 mm50000000000000
    M12
    13.000 mm20.000 mm18.300 mm1.800 mm to 2.200 mm50000000000000
    M12
    13.000 mm35.000 mm29.500 mm2.100 mm to 2.500 mm10000000000000
     
    Steel
    No. 2
    0.090"0.188"0.168"0.027" to 0.033"100000000000000
    No. 4
    0.125"0.312"0.251"0.027" to 0.033"100000000000000
    No. 4
    0.125"0.438"0.360"0.036" to 0.045"1000000000000000
    No. 6
    0.156"0.375"0.312"0.055" to 0.065"100000000000000
    No. 6
    0.156"0.562"0.460"0.036" to 0.045"1000000000000000
    No. 8
    0.173"0.375"0.312"0.027" to 0.033"100000000000000
    No. 10
    0.200"0.625"0.500"0.027" to 0.033"100000000000000
    No. 10
    0.203"0.750"0.610"0.056" to 0.071"1000000000000000
    No. 12
    0.234"0.438"0.380"0.036" to 0.045"1000000000000000
    1/4"
    0.254"0.750"0.625"0.044" to 0.052"100000000000000
    1/4"
    0.281"0.500"0.450"0.056" to 0.071"1000000000000000
    1/4"
    0.281"1.000"0.820"0.056" to 0.071"1000000000000000
    5/16"
    0.344"0.688"0.594"0.055" to 0.065"100000000000000
    5/16"
    0.344"0.875"0.740"0.056" to 0.071"1000000000000000
    5/16"
    0.344"1.125"0.952"0.056" to 0.071"1000000000000000
    3/8"
    0.406"1.000"0.850"0.056" to 0.071"1000000000000000
    3/8"
    0.406"1.250"1.040"0.084" to 0.097"500000000000000
    3/8"
    0.444"0.874"0.750"0.055" to 0.065"1000000000000000
    7/16"
    0.469"1.125"0.961"0.056" to 0.071"50000000000000
    7/16"
    0.469"1.500"1.265"0.084" to 0.097"500000000000000
    1/2"
    0.531"1.250"1.070"0.084" to 0.097"500000000000000
    1/2"
    0.531"1.750"1.485"0.084" to 0.097"500000000000000
    1/2"
    0.562"1.370"1.070"0.058" to 0.064"500000000000000
    5/8"
    0.656"1.500"1.220"0.058" to 0.064"500000000000000
    5/8"
    0.656"1.750"1.422"0.084" to 0.097"10000000000000
    3/4"
    0.812"1.250"1.125"0.058" to 0.064"500000000000000
    3/4"
    0.812"2.500"2.093"0.112" to 0.128"10000000000000
    7/8"
    0.938"1.500"1.360"0.084" to 0.097"10000000000000
    7/8"
    0.940"2.250"1.938"0.058" to 0.064"10000000000000
    1"
    1.032"2.281"1.956"0.058" to 0.064"10000000000000
    1"
    1.062"2.500"2.140"0.112" to 0.128"10000000000000
    M2
    2.200 mm4.500 mm3.900 mm0.220 mm to 0.420 mm50000000000000
    M3
    3.200 mm6.000 mm5.300 mm0.400 mm to 0.600 mm1000000000000000
    M4
    4.300 mm8.000 mm7.100 mm0.400 mm to 0.600 mm1000000000000000
    M4
    4.300 mm9.000 mm7.800 mm0.700 mm to 0.900 mm1000000000000000
    M5
    5.300 mm9.000 mm8.100 mm0.900 mm to 1.100 mm1000000000000000
    M5
    5.500 mm18.000 mm14.900 mm0.900 mm to 1.100 mm1000000000000000
    M6
    6.400 mm17.000 mm14.400 mm1.400 mm to 1.800 mm1000000000000000
    M6
    6.600 mm22.000 mm18.200 mm1.400 mm to 1.800 mm1000000000000000
    M8
    8.400 mm15.000 mm13.400 mm1.400 mm to 1.800 mm1000000000000000
    M8
    8.400 mm16.000 mm14.100 mm1.400 mm to 1.800 mm1000000000000000
    M8
    9.000 mm28.000 mm23.300 mm1.400 mm to 1.800 mm1000000000000000
    M10
    10.500 mm18.000 mm16.100 mm1.400 mm to 1.800 mm1000000000000000
    M10
    10.500 mm20.000 mm17.600 mm1.800 mm to 2.200 mm1000000000000000
    M10
    10.500 mm28.000 mm23.600 mm1.400 mm to 1.800 mm1000000000000000
    M10
    11.000 mm34.000 mm28.200 mm1.800 mm to 2.200 mm500000000000000
    M12
    13.000 mm20.000 mm18.300 mm1.800 mm to 2.200 mm1000000000000000
    M12
    13.000 mm24.000 mm21.200 mm2.100 mm to 2.500 mm500000000000000
    M12
    13.000 mm35.000 mm29.500 mm2.100 mm to 2.500 mm500000000000000
     
    back to top