View and control output pressure remotely and at the source.

Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

At least four times as accurate as standard pressure transmitters, these transmitters are ideal for use in laboratories and analytical testing applications.

Adhere to safety standards and monitor pressure when working with high concentrations of oxygen.

FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.

Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.

The diaphragm on these transmitters mounts flush with your system’s connection, leaving no room for thick liquids to clog or harden. They’re often used to monitor pressure in wastewater, paint, and adhesive-dispensing applications.

Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

For use in hazardous locations, these transmitters safely measure the difference in pressure between two process lines in flow applications—such as heat exchangers, chillers, and pumps. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

Measure the difference in pressure between two process lines in flow applications such as heat exchangers, chillers, and pumps. These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors.

Used in hazardous locations, these transmitters safely convert pressure and vacuum into an electrical signal to measure liquids, gases, and steam. NEC rated for safety, these transmitters are explosion proof, so they can be used in environments containing flammable gases and vapors.

Monitor your system’s pressure and vacuum from a smartphone or tablet via Bluetooth. These battery-powered transmitters send alerts if equipment requires your attention, so they’re good for preventative maintenance and route-based monitoring.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.