Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

Eliminate slamming doors—push the door and these hinges slowly pull it closed.

Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.

To ensure a good fit, these hinges have screws for horizontal, vertical, and depth adjustments after installation.

Easier to install than other concealed cabinet hinges, these do not require a cutout.

Instead of mounting to the side of a door, mount these hinges to the top and bottom to allow doors to open wide.

Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

These hinges are made of metal.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

These hinges are made of metal.

Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.

These hinges are made of metal.

Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

Use these hinges on lightweight screen and storm doors as well as small gates.

These hinges are made of metal.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Remove the ring to pull out the pin.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.

A stop keeps these hinges open at a set angle; push past the stop to open them to 180°.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

The mounting holes on these hinges form an industry-standard half-moon shape.

Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.

Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

One leaf mounts around the edge of the door for a secure hold, while the other mounts to the frame.

Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

Keep environments free of contaminants—with plastic hinge leaves and a metal pin, there's no metal-to-metal contact that can release particles as hinges open and close.

Also known as gravity hinges, the weight of the door returns these hinges to a closed position without the help of springs.

These hinges are made of metal.

Choose these hinges for their adherence to strict military standards for material and construction.

Made of carbon fiber, these hinges are as strong as aluminum yet lighter in weight. All have leaves that are connected by a strip of flexible Kevlar instead of a pin.

No need for drilling holes or welding, slip these hinges onto panel and door edges for a secure fit.