We will reply to your message within an hour.
More
A catch grabs and holds the strike plate, so doors stay shut when you push them closed.
Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.
An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.
Turn the screw on the latch to adjust the gripping force on the strike plate.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.
These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.
Close and open these grab latches with a push—there's no need for a handle.
Magnetic force holds doors closed.
Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.
These latches withstand temperatures up to 480° or 570° F.
To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.
Open and close these magnetic latches with a push—there's no need for a handle. Often used on audio and visual cabinets, magnetic force keeps your doors closed.
Doors stay closed with the pressure of rollers against the strike plate.
There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.
To prevent doors from slamming, these latches are hydraulic.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
Close and open these roller latches with a push—there's no need for a handle.
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.
Push in the knob to open these latches. They hold doors shut when pushed closed, making them more convenient than cam and draw latches.
Open doors with the twist of a knob and quickly push them closed to secure.
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
Keep doors on refrigerators and industrial enclosures closed.
An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
Quickly push these latches closed to secure doors and pull the ring handle with your finger to open them.
With a flat inset grip, the handle on these latches is recessed so you won’t bump them or catch clothes on them.
To open, push in the knob and pull the tab.
To prevent snags and accidental bumps, these locks have a recessed grip instead of a standard handle. They keep doors shut when you push them closed.
Great where space is a concern, these locks have a spring-loaded ring handle that returns to its recessed position when you release it. Push them closed to lock your door automatically.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
An emergency release gives you a way to escape if the door closes with you or someone else inside the enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
The low profile means less of the lock is exposed, reducing the potential for damage.
Twist the knob on these locks to open doors and push them closed to secure. These locks are a convenient alternative to cam locks, which require you to rotate the cam to open and close doors.
Snap these latches together to secure doors and use a hex key to open.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Operate these padlockable latches from either side of the door—there is a handle on both sides.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
Easily snap these latches into cutouts without tools or other hardware.
To prevent accidental opening, these latches have a safety catch.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
A safety catch prevents accidental opening.
Mount these latches on a corner to draw perpendicular surfaces together.
These latches are typically used to secure hoods and covers.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
These latches have a safety catch to prevent accidental opening.
Each latch comes with a variety of strike plates for different mounting options.
No need for a strike plate, these latches hook into a lip or notch.
The latch arm is coated with vinyl so it won't scratch surfaces.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
Draw lightweight surfaces together with these latches.
Use these L-handle latches to draw lightweight surfaces together.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
Use a 5/16" hex key to open and close these locks.
Open these locks with a slotted screwdriver.
Open these locks with a Torx driver or the included Torx keys.
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.
Lift and turn the handle 180° to open and close this lock.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
Open several draw locks with the same key.
Adjust the latching distance to compensate for gasketing and misalignment.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
Quickly push these hasps closed to conveniently secure doors. They’re nonlocking, and there’s no opening for a padlock.
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.