We will reply to your message within an hour.
Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.
These clamps have twice the capacity of standard C‐clamps.
With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.
These clamps are made of stainless steel for excellent corrosion resistance.
A bright finish makes these clamps easy to see.
Lighter weight than other metal clamps, these are less likely to bend thin material.
Plastic clamping surfaces prevent damage to material.
Made entirely of fiberglass, these clamps won’t transmit electricity and are chemical resistant. They're often used around electrical equipment as well as in plating and anodizing applications.
All components of these clamps are made of aluminum-bronze that is Factory Mutual approved. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Clamp farther in from the edge of a workpiece than with other C‐clamps.
With no handle or protruding screw, these clamps can fit into tight spaces.
The clamp body is extra-slim to fit into narrow openings.
Three screws apply pressure to three sides of a workpiece.
The jaws move in unison to apply even pressure and prevent twisting.
Apply pressure to the side of a workpiece as well as the top and bottom.
Hold the workpiece down against a bench or table.
Press the quick‐release button and slide the screw into position to make adjustments in less time.
Replace a fixed clamping surface with a swiveling pad that compensates for uneven workpieces.
For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handle to secure and release workpieces.
Turn the knob to adjust the opening size.
Squeeze the handles and the jaws will automatically adjust to fit your workpiece.
Slide the upper jaw to adjust the opening size. These clamps hold larger workpieces than other locking plier clamps of similar size.
A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.
Mount to the top of your workbench.
Press the lever down to lock these clamps, which fit in tight spaces and hold thin materials.
Angled jaws clamp sheets, bars, and U-channels at 90°.
The jaws on these tools apply outward pressure for use as a spreader.
The long, pivoting jaws let you clamp farther into your workpiece and in tight spots.
Use these tools for light duty clamping. Squeeze the handles to open; release to close.
For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handles to secure and release workpieces.
Set includes 12 clamps and the installation pliers required for positioning and removal.
Clamp thin sheet material together without drilling holes. These clamps open with special pliers and spring closed when the pliers are released.
Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.
Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.
These clamps rotate and pivot to ensure the rod hangs straight, even on sloped beams.
A toothed clip secures these clamps to the beam—no fasteners required.
For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.
Join two beams in a straight line.
Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.
A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
These clamps have a fixed hanger for rigid connections.
Support strut channel at a right angle to the beam.
Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.
Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.
Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.
Suspend and route flat-bottomed objects such as strut channel and small duct.
Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.
Create a grounding path to prevent static charge buildup.
Designed specifically for use with welding circuits.
Pads on these clamps prevent the grip from biting into the load.
Use in pairs with a two-leg sling to transfer metal plates in a horizontal position. Unlike other plate-lifting clamps, these can pick up multiple plates at the same time.
Use these clamps to raise a metal plate straight up from its original vertical position.
Clamps can take a metal plate that is stacked horizontally and tilt it up 90° to lift vertically. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).
Lift metal plates by hand by gripping the edge.
Install these two-piece collars square shafts.