Nonmarring Long-Nose Pliers


Prevent damage to your workpiece. Use these pliers to grip, bend, and twist wire and other small workpieces. The handles have plastic grips for comfort. Brass pliers and pliers with brass jaws won’t scratch steel workpieces.
Jaw | Tip | ||||||
---|---|---|---|---|---|---|---|
Overall Lg. | Lg. | Opening Style | Texture | Wd. | Thick. | Each | |
Brass | |||||||
Flat Jaws and Cushion Grip | |||||||
8" | 2 5/8" | Manual | Serrated | 3/32" | 5/32" | 0000000 | 000000 |
Nonsparking Long-Nose Pliers


Made of materials that are FM approved, these nonmagnetic pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as needle-nose and chain-nose pliers, use the long jaws to grip, bend, twist, and cut wire.
Warning: Do not use these tools in direct contact with acetylene.
Jaw | For Wire | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Lg. | Texture | Tip Thick. | Material | With Wire Cutter | Max. Gauge | Max. Dia. | Type | Specifications Met | Magnetic Properties | Each | |
Flat Jaws and Cushion Grip | ||||||||||||
7" | 1 1/4" | Serrated | 1/8" | Aluminum-Bronze | Yes | 8 | 0.129" | Soft Wire | FM Approved | Nonmagnetic | 0000000 | 0000000 |
Nonmarring Adjustable Pliers

Avoid damaging workpieces without sacrificing gripping power and adjustability. Slide the jaw pivot point on these pliers to a range of positions. The handles have plastic grips for comfort.
Brass pliers won’t mar steel workpieces.
Curved-jaw pliers are good for gripping round stock, tubing, and pipe.
Jaw | ||||||
---|---|---|---|---|---|---|
Overall Lg. | Max. Cap. | Lg. | No. of Positions | Texture | Each | |
Brass | ||||||
Curved Jaws and Cushion Grip | ||||||
10" | 1" | 1 1/4" | 5 | Serrated | 0000000 | 000000 |
Nonsparking Adjustable Pliers

Made of aluminum-bronze that is FM approved, these nonmagnetic pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They provide the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.
Warning: Do not use these tools in direct contact with acetylene.
Nonmarring Slip-Joint Pliers

Prevent damage to your workpiece with pliers that have nonmarring jaws. Adjust the pivot point to switch between two different jaw opening sizes. Pliers have combination jaws with a flat area for general purpose gripping and a curved area for round material. The grips are plastic for comfort.
Brass pliers won’t scratch steel workpieces.
Nonsparking Slip-Joint Pliers

Made of aluminum-bronze that is FM approved, these nonmagnetic pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Adjust the pivot point to switch between two different jaw opening sizes. The jaws have a flat area for general purpose gripping and a curved area for round material. Plastic grips provide comfort.
Warning: Do not use these tools in direct contact with acetylene.
Nonsparking Wire Gripping and Cutting Pliers

Made of aluminum-bronze that is FM approved, these nonmagnetic pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire. They have plastic grips for comfort.
Warning: Do not use these tools in direct contact with acetylene.
Jaw | For Wire | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Max. Capacity | Lg. | Texture | Material | Max. Gauge | Max. Dia. | Type | Specifications Met | Magnetic Properties | Each | |
Flat Jaws and Cushion Grip | |||||||||||
8 1/2" | 1" | 1 3/8" | Serrated | Aluminum-Bronze | 10 | 0.102" | Soft Wire | FM Approved | Nonmagnetic | 0000000 | 0000000 |
Nonmarring Bent-Nose Pliers


The jaws are made of brass, which won't damage steel workpieces. These pliers are shaped to reach around closely spaced components and other obstructions. Use to bend wire and grip small workpieces. The handles have plastic grips for comfort.
Jaw | ||||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Bend | Lg. (A) | Lg. (B) | Texture | Tip Thick. | Material | Each | |
Flat Jaws and Cushion Grip | ||||||||
8" | 45° | 7/8" | 2" | Serrated | 3/16" | Brass | 0000000 | 000000 |
Nonsparking Wire-Forming Pliers


Made of beryllium copper that is FM approved, these nonmagnetic pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as round-nose pliers, use them for looping and bending wire. They have plastic grips for comfort.
Warning: Do not use these tools in direct contact with acetylene.
Jaw | ||||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Lg. | Texture | Tip Dia. | Material | Specifications Met | Magnetic Properties | Each | |
Round Jaws and Cushion Grip | ||||||||
6 1/4" | 1 1/2" | Smooth | 3/32" | Beryllium Copper | FM Approved | Nonmagnetic | 000000 | 0000000 |
Nonsparking Wire Cutters


Made of aluminum-bronze that is Factory Mutual approved, this cutter inhibits sparking and is nonmagnetic and corrosion resistant. It satisfies OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Cutter produces a deeply pointed, pinched end on the tip of the wire. Use for electrical and general applications. Also known as diagonal-cutting pliers.
Warning: Do not use this tool in direct contact with acetylene.
For Wire | |||||||||
---|---|---|---|---|---|---|---|---|---|
O'all Lg. | Cut Profile | Cutting Edge Location | Jaw Lg. | Max. Dia. | Max. Gauge | Type | Material | Each | |
Oval Head and Cushion Grip | |||||||||
7" | Flush | Side | 13/16" | 0.129" | 8 | Soft Wire | Aluminum-Bronze | 0000000 | 0000000 |
High-Force Sheet Metal Cutters


Straight, Right
Curves, Left Curves

- Straight,
Right Curves

- Straight,
Left Curves
A double hinge provides high cutting force with low gripping pressure. These cutters are also known as aviation snips. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. Blades are serrated to prevent slipping.
For Max. Thick. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Titanium | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin, Titanium | |||||||||||||
10" | 1 3/4" | 1/64" | 1/64" | 1/64" | Steel | Steel | Black and Yellow | Plastic | Spring Assisted | Serrated × Serrated | Latch | 00000000 | 000000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | |||||||||||||
11 1/2" | 3" | 1/32" | 1/64" | __ | Steel | Steel | Blue | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | |||||||||||||
9 1/4" | 7/8" | 1/16" | __ | __ | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
9 3/4" | 1 1/2" | 3/64" | __ | __ | Steel | Steel | Yellow | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Right Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin, Titanium | |||||||||||||
10" | 1 1/4" | 3/64" | 1/64" | 1/64" | Steel | Steel | Green | Rubber | Spring Assisted | Serrated × Serrated | Latch | 00000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | |||||||||||||
9 3/4" | 1 3/8" | 3/64" | __ | __ | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin, Titanium | |||||||||||||
10" | 1 1/4" | 3/64" | 1/64" | 1/64" | Steel | Steel | Red | Rubber | Spring Assisted | Serrated × Serrated | Latch | 00000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | |||||||||||||
9 3/4" | 1 3/8" | 3/64" | __ | __ | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
High-Force Sheet Metal Cutters with Offset Handles



Straight, Right
Curves, Left Curves

- Straight,
Right Curves

- Straight,
Left Curves
Keep your hands clear of the material being cut with the offset handles on these cutters. Also known as aviation snips, they have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use.
Style B cutters are easy to use with one hand since the handles don’t open wide. This makes them comfortable to grip. You can lock and unlock them with either hand.
Serrated blades grip material to prevent slipping.
For Max. Thick. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Titanium | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||
A | 9 5/8" | 1 1/2" | 3/64" | 1/64" | __ | Steel | Steel | Yellow | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 000000 |
Cutting Pattern—Straight, Right Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin, Titanium | ||||||||||||||
A | 9 3/4" | 1 1/4" | 1/32" | 1/32" | 1/32" | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 00000000 | 00000 |
B | 9 1/8" | 1 1/4" | 3/64" | 1/32" | 1/64" | Steel | Steel | Black and Red | Rubber | Spring Assisted | Straight × Straight | Latch | 00000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||||
A | 9 1/4" | 1 1/4" | 3/64" | __ | __ | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin, Titanium | ||||||||||||||
A | 9 3/4" | 1 1/4" | 1/32" | 1/32" | 1/32" | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 00000000 | 00000 |
B | 9 1/8" | 1 1/4" | 3/64" | 1/32" | 1/64" | Steel | Steel | Black and Red | Rubber | Spring Assisted | Straight × Straight | Latch | 00000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||||
A | 9 1/4" | 1 1/4" | 3/64" | __ | __ | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
For Use On Aluminum, Brass, Copper, Steel, Tin | ||||||||||||||
A | 11" | 2 3/8" | 3/64" | __ | __ | Steel | Steel | Black | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Long-Life High-Force Sheet Metal Cutters with Offset Handles


- Straight,
Right Curves

- Straight,
Left Curves
Blades are high-speed steel so they stay sharp longer than steel blades, and they can be sharpened. Also known as aviation snips, these cutters have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. Handles are offset to keep your hand away from the material being cut.
For Max. Thick. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel, Tin | ||||||||||||
10 1/4" | 1 5/16" | 3/64" | 1/32" | Steel | Steel | Black | Plastic | Spring Assisted | Straight × Straight | Latch | 0000000 | 0000000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Stainless Steel, Steel, Tin | ||||||||||||
10 1/4" | 1 5/16" | 3/64" | 1/32" | Steel | Steel | Black | Plastic | Spring Assisted | Straight × Straight | Latch | 0000000 | 000000 |
High-Force Sheet Metal Cutters with Offset Handles for Tight Spaces


- Straight,
Right Curves

- Straight,
Left Curves
The handles are angled 90° from the blade so you can cut material from directly above in tight spaces. Also known as aviation snips, these cutters have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. Blades are serrated to prevent slipping.
For Max. Thick. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
8 3/4" | 1 1/4" | 1/64" | 1/64" | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 000000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
8 3/4" | 1 1/4" | 1/64" | 1/64" | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
High-Force Sheet Metal Cutter Sets



- Straight,
Left Curves

- Straight,
Right Curves

Straight, Right
Curves, Left Curves
Make straight and curved cuts in sheet metal—these sets come with three tools for different cutting patterns. Also called aviation snips, they have a double hinge, so they cut with more force and require less effort to squeeze the handles than standard sheet metal cutters. Their hardened blades slice through metal as hard as steel. For safety, each cutter has a latch that locks the blades closed when not in use.
All cutters in these sets make straight cuts. Cutters designed for either right or left cuts make tighter curves than cutters designed to do both right and left cuts.
Style A have straight handles. 7 3/16" long cutters are about the size of traditional pliers, so you can grip them with one hand and fit them in tight spaces. They cut sharper curves than longer cutters. However, they give you less leverage, meaning you need more effort to squeeze the handles.
Style B have offset handles, so your hands won’t get in the way of material while making long cuts or cutting tight curves.
Spring-assisted cutters open automatically when you release the handles for quick cutting.
Cutters with serrated blades grip the edge of material to prevent slipping while cutting.
For Max. Thick. | ||||||||
---|---|---|---|---|---|---|---|---|
Style | No. of Pieces | Includes | Opening Style | Steel | Stainless Steel | Blade Edge | Each | |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||
A | 3 | 7 3/16" Lg. Sheet Metal Cutter with 1" Cut Lg. (Straight, Right Curve Cutting Pattern) 7 3/16" Lg. Sheet Metal Cutter with 1" Cut Lg. (Straight, Left Curve Cutting Pattern) 7 3/16" Lg. Sheet Metal Cutter with 1 1/8" Cut Lg. (Straight, Right Curve, Left Curve Cutting Pattern) | Manual | 3/64" | 1/64" | Straight × Straight | 0000000 | 000000 |
A | 3 | 10" Lg. Sheet Metal Cutter with 1 1/4" Cut Lg. (Straight, Right Curve Cutting Pattern) 10" Lg. Sheet Metal Cutter with 1 1/4" Cut Lg. (Straight, Left Curve Cutting Pattern) 10" Lg. Sheet Metal Cutter with 1 3/8" Cut Lg. (Straight, Right Curve, Left Curve Cutting Pattern) | Spring Assisted | 3/64" | 1/64" | Serrated × Serrated | 0000000 | 00000 |
B | 3 | 9 3/4" Lg. Sheet Metal Cutter with 1 1/4" Cut Lg. (Straight, Right Curve Cutting Pattern) 9 3/4" Lg. Sheet Metal Cutter with 1 1/4" Cut Lg. (Straight, Left Curve Cutting Pattern) 9 3/4" Lg. Sheet Metal Cutter with 1 1/4" Cut Lg. (Straight, Right Curve, Left Curve Cutting Pattern) | Spring Assisted | 3/64" | 1/64" | Serrated × Serrated | 0000000 | 00000 |
Compact High-Force Sheet Metal Cutters


Straight, Right
Curves, Left Curves

- Straight,
Right Curves

- Straight,
Left Curves
Snip tighter curves in smaller spaces than standard high-force cutters. These cutters have a compact head and short handles, so you can slice through metal with one hand. Also known as aviation snips, they have a double hinge that delivers more cutting force per squeeze than regular sheet metal cutters. However, their short handles give you less leverage than full-sized high-force cutters. For safety, each cutter has a latch that locks the blades together when not in use.
For Max. Thick. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
7 3/16" | 1 1/8" | 3/64" | 1/64" | Steel | Steel | Black and Red | Plastic | Manual | Straight × Straight | Latch | 0000000 | 000000 |
Cutting Pattern—Straight, Right Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
7 3/16" | 1" | 3/64" | 1/64" | Steel | Steel | Black and Red | Plastic | Manual | Straight × Straight | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
7 3/16" | 1" | 3/64" | 1/64" | Steel | Steel | Black and Red | Plastic | Manual | Straight × Straight | Latch | 0000000 | 00000 |
Smooth-Edge High-Force Sheet Metal Cutters with Offset Handles


Straight, Right
Curves, Left Curves
This cutter has two blades that cut a 1/8" wide strip—peel it back for smooth edges with little distortion. Also known as aviation snips, this cutter has a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use.
Overall Lg. | Cut Lg. | Cut Wd. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | ||||||||||||
10" | 1 3/8" | 1/8" | 1/32" | Steel | Steel | Yellow | Plastic | Spring Assisted | Straight × Straight | Latch | 0000000 | 000000 |
Smooth-Edge High-Force Sheet Metal Cutters with Safety Guard


Straight, Right
Curves, Left Curves
Prevent waste from flying up as you work. A double blade makes two cuts, creating a 7/64" wide strip that peels back leaving little distortion and smooth edges. Also known as aviation snips, these cutters have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. The serrated blade edge prevents slipping.
Cutters | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Blades | ||||||||||||||||
Overall Lg. | Cut Lg. | Cut Wd. | Steel | Aluminum | Brass | Copper | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||
For Use On Aluminum, Brass, Copper, Plastic, Steel, Tin | |||||||||||||||||
11" | 1/4" | 7/64" | 3/64" | 1/16" | 1/16" | 1/16" | Steel | Plastic | Black and Orange | Plastic | Spring Assisted | Straight × Serrated | Latch | 000000 | 000000 | 0000000 | 000000 |
Sheet Metal Cutters


Straight, Right
Curves, Left Curves

Pattern
- Straight
Also known as tinners' snips, these cutters make straight cuts and curves. Blades are heat treated then sharpened for increased performance and durability.
Cutters with spring-assisted jaws open automatically for quick cutting.
For Max. Thick. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
8" | 1 3/4" | 1/32" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 000000 |
10" | 2 1/2" | 1/32" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 00000 |
12" | 3" | 1/32" | 1/32" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 00000 |
14" | 3 7/8" | 3/64" | 1/32" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 00000 |
Cutting Pattern—Straight | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
8" | 1 5/8" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Spring Assisted | Straight × Straight | ASME B107.16M | 00000000 | 00000 |
10" | 2" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Spring Assisted | Straight × Straight | ASME B107.16M | 00000000 | 00000 |
Thick-Gauge Sheet Metal Cutters


Straight, Right
Curves, Left Curves
Also known as bulldog snips, these have long handles and short blades for cutting through thick sheet metal with less effort than standard sheet metal cutters.
For Max. Thick. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
16" | 2 1/2" | 1/16" | 3/64" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 000000 |
Sheet Metal Cutters for Tight Spots


Straight, Right
Curves, Left Curves
Blades are tapered to give you more control when cutting straight lines, tight curves, and circles, and they're serrated to prevent slipping. These cutters are also known as duckbill snips.
For Max. Thick. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
7" | 1 3/4" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Serrated × Serrated | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 000000 |
10" | 2 1/2" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Serrated × Serrated | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 00000 |
12" | 3" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Serrated × Serrated | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 00000 |
Sheet Metal Cutters with Offset Handles


Straight, Right
Curves, Left Curves
Handles are angled to keep your hand away from the material as you cut straight lines and curves. The blades are heat treated then sharpened for increased performance and durability. These cutters are also known as tinners' snips.
Overall Lg. | Cut Lg. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||
10" | 2" | 1/32" | Steel | Steel | Black, Orange | Plastic | Manual | Straight × Straight | 00000000 | 000000 |
Nonsparking Sheet Metal Cutters

Made of aluminum-bronze, the handle and blade on these cutters inhibit sparking and are FM approved. Use them for straight cuts. They're also known as tinners' snips. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Warning: Do not use these tools in direct contact with acetylene due to the possible risk of explosion.
For Max. Thick. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Opening Style | Blade Edge | Specifications Met | Nonsparking Properties | Each | |
Cutting Pattern—Straight | |||||||||||
For Use On Aluminum, Brass, Copper, Plastic, Stainless Steel, Steel, Tin | |||||||||||
8" | 2" | 1/32" | 1/32" | Aluminum-Bronze | Aluminum-Bronze | Manual | Straight × Straight | FM Approved | Nonsparking | 0000000 | 0000000 |
12" | 3" | 1/32" | 1/32" | Aluminum-Bronze | Aluminum-Bronze | Manual | Straight × Straight | FM Approved | Nonsparking | 0000000 | 000000 |
Sheet Metal Cutters with Replaceable Blades and Offset Handles
![]() | ![]() Cutting Pattern - Straight, Right Curves |
![]() Cutting Pattern - Straight, Left Curves |
Loosen a few screws to swap dull blades with new ones (sold separately). These cutters have offset handles to keep your hands clear of the metal being cut. Also known as tinners’ snips.
Cutters | Replacement Blade Kits | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Cut Lg. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Opening Style | Blade Edge | Each | Each | ||
Cutting Pattern—Straight, Right Curves | |||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | |||||||||||
13" | 2 3/4" | 1/64" | Steel | Magnesium | Gray | Manual | Straight × Straight | 0000000 | 000000 | 0000000 | 000000 |
Cutting Pattern—Straight, Left Curves | |||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | |||||||||||
13" | 2 3/4" | 1/64" | Steel | Magnesium | Gray | Manual | Straight × Straight | 0000000 | 00000 | 0000000 | 00000 |
Sheet Metal Cutters with Replaceable Blades


Straight, Right
Curves, Left Curves
Replace blades as they wear. These cutters are also known as tinners' snips.
Cutters | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Blade Kit | ||||||||||||
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Opening Style | Blade Edge | Specifications Met | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | |||||||||||||
13" | 3 1/2" | 1/32" | 1/64" | Steel | Magnesium | Gray | Manual | Straight × Straight | ASME B107.500, Fed. Spec. GGG-S-291F | 000000 | 000000 | 000000 | 000000 |
Easy-Cut Sheet Metal Cutters with Replaceable Blades

The unique shape of these cutters gives you 40% more power per cut than standard sheet metal cutters. When blades get dull, loosen a few screws to replace them. The blades are stainless steel to resist corrosion, so you can use these cutters outdoors. To help you make quick cuts, a spring opens the jaws when you release the handles. These cutters are also known as tinners’ snips.
Cutters | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Blades | |||||||||||||
Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Each | Pkg. Qty. | Pkg. | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||
13" | 3 3/8" | 1/32" | 1/64" | Stainless Steel | Aluminum | Black and Orange | Plastic | Spring Assisted | Straight × Straight | 0000000 | 000000 | 2 | 0000000 | 000000 |
Nonsparking Fixed-Tip Retaining Ring Pliers

Made of beryllium copper that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They're also nonmagnetic.
Pliers for internal retaining rings are used to install and remove rings inside a bore.
Pliers for external retaining rings are used to install and remove rings around a shaft. They have spring-assisted jaws that open automatically when you release the handles.
Warning: Do not use these tools in direct contact with acetylene.

For Rings that Fit ID | Tip Dia. | Overall Lg. | Jaw Opening Style | Tip Angle | Each | |
5/16"-1" (8-25 mm) | 0.050" | 5 1/2" | Manual | Straight | 0000000 | 0000000 |
3/4"-2 3/8" (19-60 mm) | 0.070" | 7" | Manual | Straight | 0000000 | 000000 |
1 9/16"-3 15/16" (40-100 mm) | 0.090" | 8 3/4" | Manual | Straight | 0000000 | 000000 |
3 5/16"-6 1/2" (85-165 mm) | 0.125" | 11 1/2" | Manual | Straight | 0000000 | 000000 |

For Rings that Fit OD | Tip Dia. | Overall Lg. | Jaw Opening Style | Tip Angle | Each | |
3/4"-2 3/8" (19-60 mm) | 0.070" | 7" | Spring Assisted | Straight | 0000000 | 0000000 |
Nonsparking Electrical Wire Strippers

Made of aluminum-bronze that is FM approved, these wire strippers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Load wire from the front of the stripper.
Warning: Do not use these tools in direct contact with acetylene.
For Wire Gauge | |||||||
---|---|---|---|---|---|---|---|
Solid | Stranded | Max. Strip Lg. | Lg. | Material | Grip Material | Each | |
12 | 40-5 | 0.23" | 6 11/16" | Aluminum-Bronze | PVC | 0000000 | 0000000 |
Hand-Held Sheet Metal Benders for Opening Seams


Open sheet metal seams without cutting. The jaws slide under seams to pry the sheets apart. Because you’ve unfolded the sheet metal instead of cutting it, you can reuse both panels.
Jaw Wd. | Lg. | Material | Each | |
For Aluminum, Brass, Copper, Stainless Steel, Steel | ||||
---|---|---|---|---|
1 1/4" | 10" | Steel | 0000000 | 0000000 |
Tube Bending Pliers

Grip tubing from the side to make bends in tight spaces. The rounded jaws grasp tubing without creating kinks or causing damage. Often used to install brake and fuel lines.