Replace existing transmitters or team a transmitter and a receiver (not included) to remotely operate your automatic overhead door openers.

Universal transmitters are compatible with Chamberlain, Craftsman, Genie, Liftmaster, Multicode, and Stanley openers. They can operate two door openers.

DIP-switch transmitters are compatible with Liftmaster openers that have a DIP-switch receiver. Use them to operate a single door. The three-button model has open, close, and stop functions.

Also known as jackshafts, these openers will stop and reverse the door's downward motion if it encounters an obstruction or the light beam between the opener's sensing switches is interrupted. During a power failure, use the manual chain hoist to move the door. These openers meet UL 325 safety standards for door operators and systems.

An optional remote transmitter is sold separately.

If you don't have your remote, you can still open and close automatic overhead doors with a private 4-digit PIN. Use these transmitters to operate one transmitter or receiver. The keypad is backlit for visibility in the dark.

Thicker than standard safety switch mats, these can withstand repeated impact from heavy and sharp objects. They turn equipment off when stepped on or when a fault is detected, preventing personnel from getting too close to dangerous equipment when equipment is on. A complete switch requires a mat and a controller (sold separately). Together they meet ANSI/RIA R15.06 safety requirements. Mats are rated IP65 for protection from washdowns.

Optional frames secure mats to the floor. Punch holes in the frame to insert a screw anywhere along the length.

For technical drawings and 3-D models, click on a part number.

Prevent personnel from getting too close to dangerous equipment while it’s running. Step anywhere on these mats and they can turn on warning lights and alarms or shut down equipment. To minimize circuit damage, they also activate if they detect any malfunctions in your equipment’s electrical system. A complete switch requires a mat and a controller (sold separately). Together they meet ANSI/RIA R15.06 safety requirements. Mats are rated IP65 for protection from washdowns.

Red mats are easy to spot in crowded areas and in dim light. They help you avoid stepping on them if you don’t want to stop machinery or to find them quickly if you do.

Mats with diamond tread have a raised pattern on the surface to add traction and prevent slipping. Made from aluminum, they’re more durable than plastic mats, and less likely to be punctured or damaged by impact. However, they’re also more rigid than plastic mats, so they can only be used on flat surfaces. These mats are often used in high-traffic welding shops and freight warehouses.

Optional frames secure mats to the floor. Punch holes in the frame to insert a screw anywhere along the length.

For technical drawings and 3-D models, click on a part number.

Step on these mats to control doors, lights, or alarms.

These mats fit under carpeting or anywhere else you want to hide them.

Customize the length of these switches by cutting them from a 25-foot roll. The width cannot be cut. They fit under carpeting or anywhere else you want to hide them. Mats have bare wires that solder or crimp to a connector.

Rated IP67 and NEMA 6, these switch mats withstand washdowns and temporary submersion. They have a smaller footprint than other switch mats to fit in confined spaces.

With a smaller footprint than other switch mats, these fit in confined spaces.