Determine if aluminum is the right material for you and which alloys will work best.
Multipurpose 6061 Aluminum Sheets and Bars
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Extruded sheets and bars are formed by a die for close-tolerance widths, then cut to the lengths listed.
Aluminum that meets ASTM B209 or ASTM B221 complies with standards for materials.
Aluminum that meets an SAE AMS standard conforms to the material and process needs of the aerospace industry.
If you don’t see the sheet or bar size you need, please specify dimensions under additional sheet sizes or additional bar lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: See table
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: T6511
- Fabrication: Extruded
- Specifications Met: ASTM B221, SAE AMS QQ-A-200/8
| Thick. | Thick. Tolerance | Wd. | Wd. Tolerance | Lg. | Heat Treatment | Temp. Range, °F | Length Tolerance | Each | |
| 5" | -0.034" to 0.034" | 5" | -0.034" to 0.034" | 5" | Hardened | -320° to 300° | Plus | 00000000 | 0000000 |
Tight-Tolerance Multipurpose 6061 Aluminum Sheets and Bars
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: ASTM B209
These sheets and bars are precision ground either on all six sides or just on the top and bottom. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Sheets and bars that are precision ground on all sides are consistently flat, square, and parallel on all six sides. They’re also known as blanks and are ready for use in your CNC machine.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Fabrication | Temper | Heat Treatment | Temperature Range, °F | Flatness Tolerance | Each | |
Precision Ground on All Sides | ||||||||
|---|---|---|---|---|---|---|---|---|
5" x 5" | ||||||||
| 5" | -0.002" to 0.002" | Cold Rolled | T651 | Hardened | -320° to 300° | Not Rated | 0000000 | 0000000 |