Kits contain Industrial quick-disconnect plugs in four coupling sizes so you can determine the size of your couplings without needing to measure.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.

Compatible with Schrader-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.

Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.

Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.

Sets contain a crimping tool and a variety of CGA fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system.

Also known as CGA nuts, these are designed for low-pressure welding applications downstream of your pressure regulator. Attach them to barbed hose fittings for compressed gas to make a threaded connection to torches or pressure regulators.

Designed to handle high-pressure welding applications, these CGA fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders.

Permanently seal a crimp-on fitting onto your hydraulic hose to create a leak-tight connection.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers.

Designed for use in welding applications, these fittings are flame retardant.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Fittings have good corrosion resistance.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to hold the tubing in place.

These compression tube fittings meet Department of Transportation FMVSS 571 safety standards for air brake lines.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

These brass couplings have good corrosion resistance.

Made of stainless steel, these couplings stand up to wet environments.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

These fittings have the highest pressure rating of all the Yor-Lok tube fittings we offer.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use at pressures up to 1,500 psi.

Connect stainless steel tubing on one end and plastic tubing on the other end.

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Transfer liquids and gasses into high-vacuum chambers with these assembled fittings, also known as feedthroughs.

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

The sleeve in these fittings is rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal.

Choose these metal fittings when you need better durability than our plastic push-to-connect fittings.

Also known as JIS (Japanese Industrial Standard) fittings.

Use these fittings in an air vacuum system to avoid the hassle of brazing and welding. Insert two fittings into a clamp and tighten to form a secure seal in steel tubing.

A tube adapter sits flush against the flat face of the fitting so you can slide the steel tubing and fitting sideways to disconnect in cramped spaces. Also known as zero-clearance fittings.

With the best corrosion resistance of any metal fitting we offer, these Hastelloy fittings will stand up to aggressive chemicals and are resistant to pitting and stress cracking. Also known as instrumentation fittings, they include a nut with two sleeves.

The external hex bolt on these fittings allows for easy installation in cramped spaces. They are also known as banjo-style fittings and JIC (Joint Industrial Council) fittings. They provide a tight seal on tubing that is flared to 37°.

Use a hammer strike or a vise to crimp ferrules onto your hose and secure barbed hose fittings.

Individual dies allow you to crimp large sizes of air and water hose from 3/4" to 1 3/8" OD.