We will reply to your message within an hour.
These brackets have greater weight capacities than standard duty fold-away shelf brackets.
These brackets allow you to lower your shelf 10 or 20 degrees.
These shelves fold up to create a temporary work surface, then fold back down for extra space when they’re not in use.
The posts have grooves that allow shelves to adjust on 1" centers.
These steel shelves are epoxy-coated, making them chemical and corrosion resistant.
The three-sided design stabilizes packages and other contents when moving.
This shelving is reinforced to hold nearly twice as much weight as other wire shelving, and is chrome plated to resist corrosion. Shelf panels are removable for easy cleaning.
Often used in food service areas and laboratories, these shelving units have removable, dishwasher-safe panels that are treated to prevent degradation caused by the growth of stain- and odor-causing bacteria.
This shelving has three times the shelf capacity of our Heavy Duty Wide and Deep Wire Shelving.
Also known as bulk racks, these units offer more storage space per level for large items and boxes.
This shelving quickly snaps together with no tools or hardware needed, yet is strong enough to handle your heavy parts and equipment.
Our strongest and most durable shelving, these units have shelf capacities 25% higher than any other shelving.
The shelves on these units pull out to access heavy dies, machinery, and tools. They slide on roller bearings so you can retrieve contents horizontally with a forklift and vertically with a hoist, crane, or monorail system.
Also known as bulk racks, these units hold oversized equipment and raw material.
This shelving won't rust, dent, peel, or chip.
Don't fumble with nuts, bolts, or shelf clips—shelves have rivets that tap into keyhole slots on the posts with a rubber mallet.
Shelves are reversible, allowing you to use them as a flush surface or with a lip to prevent items from falling off.
The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.
This shelving is corrosion resistant and is often used in laboratories and food service applications.
Faster to assemble than other heavy duty shelving, these units require no hardware.The uprights come assembled, and the shelves slide into place.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Select from a variety of uprights and beams to build your own personalized rack.
With up to 9,600 lbs. capacity per storage level, these are the strongest pallet racks we offer.
With forklift access on four sides, you can move these racks as easily as you move your pallets. Stack racks up to five units high, and easily reconfigure as your needs change. Racks should only be moved one unit at a time.
Store heavy, bulky loads on these racks that are designed to withstand frequent use of power-lifting equipment.
Choose from uprights up to 16 feet high and beams up to 144” wide to create a pallet rack to fit your needs.
Compatible with pallet racks with stepped beams.
Use with box- and channel-style pallet rack beams.
Shaft collars secure the spools on the spindles.
Also known as cantilever racks.
Use individual components to create your own personalized storage solution. These racks are also known as cantilever racks.
These cantilever racks are made to be used with forklifts and cranes.
With multiple heights, widths, and arm styles to choose from, create a rack that fits your needs. These racks are also known as cantilever racks.
These racks, also known as bakery carts and bun racks, are often used for food service, electronics, and small-parts assembly applications.
These cabinets are made of steel mesh for air circulation and visibility.
Keep an eye on inventory without opening the doors.
Made of stainless steel, these cabinets are corrosion and acid resistant.
These durable cabinets have the thickest steel construction we offer and can hold 1,200 to 1,900 lbs. per shelf.
The full-height compartment provides storage for tall items such as brooms and shovels.
These cabinets are scratch and corrosion resistant for extra durability outdoors.
Provide controlled access to supplies with compartments that lock separately.
This cabinet is built to store your heaviest supplies, parts, and equipment.
The doors of these cabinets are made of steel mesh for air circulation and visibility.
Built to store your heaviest supplies, parts, and equipment.
Often used outdoors, these cabinets are impact and weather resistant.
Use the pegboard in these cabinets to hang and organize tools, keys, and other items.
Hang these cabinets on the wall or place them on a workbench to keep floor space clear.
These stainless steel cabinets resist corrosion in harsh enviroments.
These cabinets have a shelf capacity of 1,900 lbs.—nearly 10 times more than other wall-mount shelf cabinets.
These cabinets have open shelves for storing larger supplies and equipment.
Store harsh, nonflammable liquids in these plastic cabinets—even acid vapors won't corrode them.
Rollers inside the cabinet make contents easy to load and remove.
Use cabinets individually or stacked on top of compatible bench-height drawer cabinets.
Use cabinets individually, stacked, or connect side-by-side.
Cabinets are stackable with others of the same width and depth.
Store your heaviest tools and parts. Use cabinets individually, stacked, or connect side-by-side.
Plastic cabinets and boxes won't dent, chip, or rust.
Carry multiple compartmented boxes at once using the built-in handle.
Remove individual boxes to take the parts you need without moving the entire storage unit.
Padlock these cages to limit access to equipment and supplies.
These cages are chrome plated for corrosion resistance and meet NSF/ANSI 2 standards for food equipment.
Organize equipment and supplies in these chests, also known as job boxes.
Raise or lower these tables to a comfortable working height.
Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.
With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.
Adjust these tables from 18" to 24" to customize the height of machinery and equipment.
Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.
With a thick steel frame and a capacity of at least 10,500 lbs., these welded tables are our strongest and most durable adjustable-height tables. They can be configured for either seated or standing tasks.
Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.
These durable tables won't warp or splinter. They can be configured at a custom height.
With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They can be configured at a custom height.
A lower shelf provides additional storage space. Often used in laboratories, these tables stand up to repeated washdowns and resist damage from grease and chemicals.
Adjust the shelves to accommodate a computer and other electronic equipment.
The work surface is positioned at a comfortable height for writing and working while standing.
The top compartment has a window that shields the monitor while providing a clear view of the screen.
These workstations have almost twice the top capacity of our standard stand-up-height workstations.
With thicker steel and a thicker window than other stand-up-height computer workstations, these workstations protect a computer from tough plant environments.
Fold the legs and use the handle to carry these workbenches with one hand.
Position these shelves at any angle.
Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.
These workbenches range in size from 32"-42" wide.
Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.
These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.
At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.
Organize all your 3D printing tools and supplies in one mobile workstation.
Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.
High mesh panels on three sides and an open top allow you to stack tall items while maintaining good visibility and quick access.
Keep paperwork organized while in transit. These carts hold letter- and legal-size hanging folders.
Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.
These carts have easy-to-clean surfaces, lipped shelves to contain spills, and meet NSF/ANSI 2 sanitary standards for food-service applications.
Not only are these carts corrosion resistant, they also meet NSF/ANSI standards so they're suitable for food processing applications.
A braided cable on these carts dissipates static charges, making them useful for moving electronics and other static-sensitive equipment.
Carts meet NSF/ANSI standards for use in food-service areas.
Elevate your laptop screen to eye level with these stands to improve posture and reduce back and neck strain.
Reduce bending while loading and unloading—raised platforms keep material at a comfortable working height.
Attach a monitor to these stands, then route cords through the hollow mounting poles for a clean, organized appearance.
Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.