Hand-Crank Adjustable-Height Workbench Bases
Adjust the height of a workbench without clearing off the top or loosening leg bolts. The hand crank allows for fine adjustments to the workbench height.
Stationary bases have retractable hand cranks.
For Top | Cap., lbs. | Top Mtg. Holes | Floor Mtg. Plate | Floor Mtg. Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Ht. | While Adjusting Ht. | O'all | Material | Color | No of. | Dia. | Fasteners Included | Wd. | Dp. | No. of | Dia. | Fasteners Included | Assembled or Unassembled | Each | |
| 24"-36" | 24"-30" | 30"-42" | 500 | 1,500 | Powder-Coated Steel | Beige | 6 | 3/8" | No | 16" | 16" | 4 | 3/8" | No | Assembled | 0000000 | 000000000 |
For Top | Cap., lbs. | Wheel | Top Mtg. Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Ht. | While Adjusting Ht. | O'all | Material | Color | Configuration | Dia. | No of. | Dia. | Fasteners Included | Assembled or Unassembled | Each | |
| 48" | 30"-36" | 30"-42" | 750 | 1,200 | Powder-Coated Steel | Beige | Four Swivel Casters | 4" | 6 | 9/32" | No | Assembled | 0000000 | 000000000 |
| 60" | 30"-36" | 30"-42" | 750 | 1,200 | Powder-Coated Steel | Beige | Four Swivel Casters | 4" | 6 | 9/32" | No | Assembled | 0000000 | 00000000 |
| 72" | 30"-36" | 30"-42" | 750 | 1,200 | Powder-Coated Steel | Beige | Four Swivel Casters | 4" | 6 | 9/32" | No | Assembled | 0000000 | 00000000 |
Standard Duty Adjustable-Height Workbench Legs
Use two legs to hold up to 4,000 lbs. Adjust height in 1 1/2" increments with rivets that slide into keyhole slots. All legs have knockouts in the front and back to accept duplex electrical outlets.
At least three workbench legs are required for tops 96" wide and larger.
Adjustments | Top Mtg. Holes | Floor Mtg. holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Top Dp. | Ht. | Ctr.-to-Ctr. | Type | Cap. per Leg, lbs. | Material | Color | Gauge | No of. | Dia. | Fasteners Included | No. of | Dia. | Fasteners Included | Each | |
Stationary | |||||||||||||||
| 30" | 28"-35 1/2" | 1 1/2" | Keyhole Slots | 2,000 | Painted Steel | Gray | 14 | 16 | 5/16" | No | 2 | 3/8" | No | 0000000 | 000000 |
| 36" | 28"-35 1/2" | 1 1/2" | Keyhole Slots | 2,000 | Painted Steel | Gray | 14 | 16 | 5/16" | No | 2 | 3/8" | No | 0000000 | 00000 |
For Top | O'all | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Wd. | Dp. | Ht. | Material | Color | Gauge | Cap., lbs. | Fasteners Included | No. of Holes | Hole Wd. | Hole Lg. | Each | |
| 48" | 24"-36" | 48" | 14" | 3" | Powder-Coated Steel | Gray | 16 | 700 | Yes | 4 | 5/16" | 5/8" | 0000000 | 000000 |
| 60" | 24"-36" | 60" | 14" | 3" | Powder-Coated Steel | Gray | 16 | 1,000 | Yes | 4 | 5/16" | 5/8" | 0000000 | 00000 |
| 72" | 24"-36" | 72" | 14" | 3" | Powder-Coated Steel | Gray | 16 | 1,000 | Yes | 4 | 5/16" | 5/8" | 0000000 | 000000 |
Extra Heavy Duty Adjustable-Height Workbench Legs
With thick steel and an all-welded construction, a pair of legs can support up to 12,000 lbs. Remove and reposition the bolts to adjust height in 1" increments.
At least three workbench legs are required for tops 96" wide and larger.
Adjustments | Top Mtg. Holes | Floor Mtg. Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Top Dp. | Ht. | Ctr.-to-Ctr. | Type | Cap. per Leg, lbs. | Material | Color | Gauge | Dia. (No. of) | Fasteners Included | Dia. (No. of) | Fasteners Included | Each | |
Stationary | |||||||||||||
| 24" | 30"-36" | 1" | Bolt | 6,000 | Painted Steel | Green | 11 | 9/32" (8), 1/2" (6) | No | 1/2" (4) | No | 0000000 | 0000000 |
| 24" | 36"-42" | 1" | Bolt | 6,000 | Painted Steel | Green | 11 | 9/32" (8), 1/2" (6) | No | 1/2" (4) | No | 0000000 | 000000 |
| 30" | 30"-36" | 1" | Bolt | 6,000 | Painted Steel | Green | 11 | 9/32" (8), 1/2" (10) | No | 1/2" (4) | No | 0000000 | 000000 |
| 30" | 36"-42" | 1" | Bolt | 6,000 | Painted Steel | Green | 11 | 9/32" (8), 1/2" (10) | No | 1/2" (4) | No | 0000000 | 000000 |
| 36" | 30"-36" | 1" | Bolt | 6,000 | Painted Steel | Green | 11 | 9/32" (8), 1/2" (10) | No | 1/2" (4) | No | 0000000 | 000000 |
| 36" | 36"-42" | 1" | Bolt | 6,000 | Painted Steel | Green | 11 | 9/32" (8), 1/2" (10) | No | 1/2" (4) | No | 0000000 | 000000 |
For Top | O'all | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Wd. | Dp. | Ht. | Material | Color | Gauge | Cap., lbs. | Fasteners Included | Number of Holes | Hole Dia. | Each | |
| 36" | 24" | 34" | 12" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 0000000 |
| 36" | 30" | 34" | 17" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 36" | 36" | 34" | 24" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 48" | 24" | 46" | 12" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 48" | 30" | 46" | 17" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 48" | 36" | 46" | 24" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 60" | 24" | 58" | 12" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 60" | 30" | 58" | 17" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 60" | 36" | 58" | 24" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 72" | 24" | 72" | 12" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 72" | 30" | 72" | 17" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 72" | 36" | 72" | 24" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 4 | 1/2" | 0000000 | 000000 |
| 96" | 24" | 94" | 12" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 6 | 1/2" | 0000000 | 000000 |
| 96" | 30" | 94" | 17" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 6 | 1/2" | 0000000 | 000000 |
| 96" | 36" | 94" | 24" | 2" | Painted Steel | Green | 12 | 1,000 | Yes | 6 | 1/2" | 0000000 | 000000 |
Recessed-Style Adjustable-Height Workbench Legs
These legs provide more leg room than other styles. Remove and reposition the bolts to adjust height in 1" increments. They have leveling feet to compensate for uneven floors.
At least three workbench legs are required for tops 96" wide and larger.
Adjustments | Top Mtg. Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Top Dp. | Ht. | Ctr.-to-Ctr. | Type | Cap. per Leg, lbs. | Material | Color | Gauge | No. of | Dia. | Fasteners Included | Each | |
Stationary | ||||||||||||
| 30"-36" | 28 1/4"-39 1/4" | 1" | Bolt | 750 | Painted Steel | Gray | 14 | 6 | 1/2" | Yes | 0000000 | 0000000 |
Heavy Duty Adjustable-Height Workbench Legs
Use two legs for a capacity of 6,000 lbs. Remove and reposition the bolts to adjust height in 1" increments. All legs have leveling feet to compensate for uneven floors and knockouts in the front and back to accept duplex electrical outlets.
At least three workbench legs are required for tops 96" wide and larger.
For technical drawings and 3-D models, click on a part number.
Adjustments | Top Mtg. Holes | Floor Mtg. Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Top Dp. | Ht. | Ctr.-to-Ctr. | Type | Cap. per Leg, lbs. | Material | Color | Gauge | Dia. (No. of) | Fasteners Included | Dia. (No. of) | Fasteners Included | Each | |
Stationary | |||||||||||||
| 28"-30" | 29 1/4"-35 1/4" | 1" | Bolt | 3,000 | Powder-Coated Steel | Gray | 14 | 5/16" (4) | No | 7/16" (2), 3/8" (4) | No | 0000000 | 0000000 |
| 34"-36" | 29 1/4"-35 1/4" | 1" | Bolt | 3,000 | Powder-Coated Steel | Gray | 14 | 5/16" (4) | No | 7/16" (2), 3/8" (4) | No | 0000000 | 000000 |
For Top | O'all | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Wd. | Dp. | Ht. | Material | Color | Gauge | Cap., lbs. | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 48" | 28"-36" | 44" | 13 1/2" | 1" | Powder-Coated Steel | Gray | 16 | 330 | No | 4 | 5/16" | 0000000 | 000000 |
| 60" | 28"-36" | 56" | 13 1/2" | 1" | Powder-Coated Steel | Gray | 16 | 230 | No | 4 | 5/16" | 00000000 | 00000 |
| 72" | 28"-36" | 68" | 13 1/2" | 1" | Powder-Coated Steel | Gray | 16 | 230 | No | 4 | 5/16" | 00000000 | 000000 |
Hydraulic Lift Kits for Workbenches
Transform a fixed-height workbench into an adjustable-height workbench with one of these kits. They allow for fine adjustments to the workbench height.
To install, attach each cylinder to the workbench legs with fasteners (not included). Then, mount the pump under the workbench top and connect the cylinders to the pump with included tubing.
Stationary kits have leveling feet to compensate for uneven floors.
Kits with electric motor adjust height with the push of a button.
Cylinder | Cylinder Mtg. Holes | Pump Mtg. Holes | Switch Mtg. Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Min. Leg Ht. | Ht. Added | Wd. | Material | Cap., lbs. | No. of | Dia. | No. of | Dia. | No. of | Dia. | Mtg. Fasteners Included | Cord Lg. | Specifications Met | Each | |
Stationary | |||||||||||||||
Hand Crank | |||||||||||||||
| 13 1/4" | 1 5/8"-7 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 0000000 |
| 15 1/4" | 1 5/8"-9 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 000000 |
| 19 1/4" | 1 5/8"-13 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 000000 |
| 23 1/4" | 1 5/8"-17 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 00000000 |
Electric Motor with Three Prong Plug (120V AC) | |||||||||||||||
| 13 1/4" | 1 5/8"-7 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| 15 1/4" | 1 5/8"-9 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| 19 1/4" | 1 5/8"-13 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| 23 1/4" | 1 5/8"-17 5/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
Mobile | |||||||||||||||
Hand Crank | |||||||||||||||
| 13 1/4" | 4 7/8"-10 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 000000 |
| 15 1/4" | 4 7/8"-12 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 000000 |
| 19 1/4" | 4 7/8"-16 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 000000 |
| 23 1/4" | 4 7/8"-20 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 3 | 3/8" | __ | __ | No | __ | CSA Certified, UL Listed | 00000000 | 00000000 |
Electric Motor with Three Prong Plug (120V AC) | |||||||||||||||
| 13 1/4" | 4 7/8"-10 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| 15 1/4" | 4 7/8"-12 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| 19 1/4" | 4 7/8"-16 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| 23 1/4" | 4 7/8"-20 7/8" | 1 1/2" | Aluminum | 1,000 | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 ft. | CSA Certified, UL Listed | 00000000 | 00000000 |
| Replacement Handles for Lift Kits with Hand Crank | 00000000 | Each | 0000000 |
| Optional Maintenance Kit (Includes 10 Nuts and Ferrules, 16 oz. of Hydraulic Fluid, 36 ft. of Hydraulic Tubing, 8-oz. Filler Bottle with Needle) | 00000000 | Each | 00000 |
| Replacement Leveling Feet for Stationary Lift Kits | 000000000 | Each | 0000 |
| Replacement Gear Motor for Lift Kits with Electric Motor | 000000000 | Each | 000000 |
| Replacement Switch Assemblies for Lift Kits with Electric Motor | 00000000 | Each | 000000 |
Cylinder | Cylinder Mtg. Holes | ||||||
|---|---|---|---|---|---|---|---|
| For Min. Leg Ht. | Ht. Added | Wd. | Material | No. of | Dia. | Each | |
For Stationary Lift Kits | |||||||
| 13 1/4" | 1 5/8"-7 5/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 0000000 |
| 15 1/4" | 1 5/8"-9 5/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 000000 |
| 19 1/4" | 1 5/8"-13 5/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 000000 |
| 23 1/4" | 1 5/8"-17 5/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 000000 |
For Mobile Lift Kits | |||||||
| 13 1/4" | 4 7/8"-10 7/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 000000 |
| 15 1/4" | 4 7/8"-12 7/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 000000 |
| 19 1/4" | 4 7/8"-16 7/8" | 1 1/2" | Aluminum | 4 | 1/4" | 00000000 | 000000 |
| 23 1/4" | 4 7/8"-20 7/8" | 1 1/2" | Aluminum | 4 | 1/4" | 000000000 | 000000 |
Wheel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Cap. per Caster, lbs. | Stem Thread Size | Stem Lg. | Wheel/Tread Material | Frame Material | Caster Type | Each | |
| 3" | 1 1/4" | 300 | 1/2"-13 | 1 1/2" | Polypropylene Plastic | Steel | Swivel with Brake | 000000000 | 000000 |
Folding Table Legs
Use these legs to make or repair a folding table.
Adjustable-height legs raise up to 14" to go from standard table height to workbench height, making them suitable for seated or standing tasks. Push in a button and slide the legs to adjust height in 1" increments. Legs are chrome plated at the bottom.
Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Top Wd. | For Top Dp. | Leg Dia. | Ht. | Dp. | No. Required per Top | Material | Color | Cap. per Leg @ Ht. | Mounting Fasteners Included | No. of | Dia. | Assembled or Unassembled | Each | |
Adjustable Height | ||||||||||||||
Straight | ||||||||||||||
| 96" | 24"-30" | 1" | 24 1/2"-38 1/2" | 20" | 2 | Powder-Coated Steel | Black | 125 lbs. @ 24 1/2", 50 lbs. @ 38 1/2" | No | 12 | 1/4" | Assembled | 0000000 | 000000 |
| 96" | 36"-42" | 1" | 24 1/2"-38 1/2" | 30" | 2 | Powder-Coated Steel | Black | 125 lbs. @ 24 1/2", 50 lbs. @ 38 1/2" | No | 12 | 1/4" | Assembled | 0000000 | 00000 |
Single-Column Table Legs
Replace a table leg or make a table with your own tabletop. To make a table, use four straight legs, two T-base legs, or one X-base leg.
Stationary legs have leveling feet to compensate for uneven floors.
Adjustable-height legs raise up to 9" for a comfortable working height while seated. Push in a button and slide the leg to adjust height in 1" increments.
Mounting Holes | Mounting Plate | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Top Wd. | For Max. Top Dp. | Leg Dia. | O'all Ht. | O'all Dp. | No. Required per Top | Material | Color | Cap. per Leg, lbs. | Mounting Fasteners Included | No. of | Dia. | Wd. | Dp. | Assembled or Unassembled | Each | |
Stationary Adjustable-Height | ||||||||||||||||
Straight | ||||||||||||||||
| 60" | __ | 2" | 25"-34" | __ | 4 | Powder Coated Steel | Black | 75 | No | 8 | 9/32" | 6" | 6" | Assembled | 0000000 | 000000 |
T-Base | ||||||||||||||||
| 60" | 30" | 2" | 25"-34" | 22" | 2 | Powder Coated Steel | Black | 150 | No | 8 | 9/32" | 6" | 8" | Assembled | 0000000 | 000000 |
| 60" | 36" | 2" | 25"-34" | 26" | 2 | Powder Coated Steel | Black | 150 | No | 8 | 9/32" | 6" | 8" | Assembled | 0000000 | 000000 |