The dual-wheel design of these casters provides better load distribution and easier turning than other leveling casters. Turn the nut to adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Casters have sealed double-ball bearings for the smoothest swiveling and protection from dust and debris.

Phenolic wheels are nonmarking and perform well at high temperatures. They roll best on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.

Wheels with sealed ball bearings are smooth rolling and have the best protection against dust and debris.

For technical drawings and 3-D models, click on a part number.

Designed for sanitary environments such as food plants, use these casters to move machinery, carts, furniture, and other equipment while compensating for uneven floors. They have a hygienic thread cover that prevents contaminants from settling in the grooves. To further block out contaminants even as the caster moves, there is a silicone seal at each end of the thread cover, as well as another seal where the caster swivels. The frame of these casters has a smooth finish and rounded edges, so there are no crevices for bacteria to grow in, reducing the chance of foodborne illnesses. Made of 304 stainless steel, the frame withstands washdowns and chemicals used for cleaning.

To comply with Hazard Analysis and Critical Control Point (HACCP) programs, all of the silicone seals have metal and chemical additives, so they can be picked up on metal detectors or X-ray machines. They’re also FDA compliant for direct contact with food.

Level your equipment by adjusting the threaded stem. Rough surfaces and debris won’t damage the polyurethane wheel on these casters because it resists abrasions and absorbs shocks. Press once on the foot pedal to lock both the wheel and the swivel. When it’s not locked, swiveling is smooth thanks to the double ball swivel bearing.

For technical drawings and 3-D models, click on a part number.

Set these floor locks to the height you need to compensate for uneven and sloped floors. Use them to stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.

Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.

For technical drawings and 3-D models, click on a part number.

Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.

Side Mount—Slide the frame of your equipment through the mounting plate.

Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.

Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.

Warning: Never use to support people or loads over people.

For technical drawings and 3-D models, click on a part number.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

For technical drawings and 3-D models, click on a part number.

Install a door without needing a second person to hold it upright or leaning it against a wall. These dollies allow you to wheel a door into place and align it with the hinges on the frame. Turn the knobs on the casters to adjust the height. Apply the brakes to prevent them from rolling away. Dollies hold 1 3/4” thick doors; use spacers to hold 1 3/8” thick doors.

Also known as appliance dollies, these dollies are used in pairs to support loads of varying sizes. Each half of the dollies has a support with eight rollers at both corners. Loosen the wingnut and slide the ends to adjust. A nonmarring rubber surface on the top of the supports grips loads. Their polypropylene wheels are lightweight and work on smooth surfaces.

Sized to move pallets, set these dollies to a comfortable working height while loading and unloading. Loosen the leg bolts to adjust the height of the platform in 2" increments from 24" to 34".

Dollies have four swivel casters with nonmarking phenolic wheels for easy maneuvering on smooth floors. Dual floor locks stabilize the dollies during loading and unloading.

Use these dollies to move bulky loads over both level and uneven surfaces. The platforms are rubber-padded to grip loads without damaging the load surface. The rollers are nonmarking nylon.

Styles A and B are corner supports with two contact points connected by an adjustable bar that keeps them parallel. They have rigid platforms for straight-line movement.

Style B have handles on the dollies to make them easier to carry.

Styles C-E have a T-handle and swivel platform that allows for easy steering and turning. Use them alone or with Styles A and B corner supports.

Style E have an adjustable frame with two contact points to fit a variety of loads. They have a ring for towing applications

Note: When using dollies together, use dollies with the same overall height.

Open platforms on these dollies allow liquid to pass through, while a lip on each corner keeps loads from sliding off. Four swivel casters make these easy to maneuver. Dollies can transport square cartons and crates in addition to round drums.

Style B are adjustable to fit different size loads.

Dollies with rubber wheels absorb shock to roll over smooth or rough surfaces.

The casters on these dollies are mounted outside the platform for increased stability.

Style B have adjustable set screws to securely hold drums of different sizes.

Polypropylene dollies are lightweight and corrosion resistant.

Dollies with rubber or polyurethane wheels absorb shock to roll over smooth or rough surfaces.