These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces. They are galvanized and zinc-plated steel, which have better corrosion resistance than plain steel fittings. BSPP and metric male threads have either a gasket, or a gasket and washer, to prevent leaks.

For technical drawings and 3-D models, click on a part number.

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air, water, or hydraulic fluid to five locations from a single supply source. Manifolds have mounting holes, so you can mount from the top.

Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.

316 stainless steel manifolds have excellent corrosion resistance and can handle fuel, gasoline, coolant and other harsh substances.

For technical drawings and 3-D models, click on a part number.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.

To prevent leaks, UN/UNF (SAE Straight) male threads have a gasket. Metric and BSPP male threads have either a gasket or a gasket and washer.

For technical drawings and 3-D models, click on a part number.

Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards. Also known as instant fittings, they connect to tubing with a simple push, and an internal gripping ring and O-ring will hold the tubing tight. A built-in tube support slips inside the tubing to prevent it from collapsing. To disconnect, push on the release ring and pull the tubing out of the fitting. All have good corrosion resistance.

Metric male threads have a gasket to protect against leaks.

For technical drawings and 3-D models, click on a part number.

Fittings have barbs that grip onto tubing.

Nylon fittings have excellent impact and abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.

Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance.Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.

Fittings with a threaded end are also known as hose nipples.

Metric, UN/UNF (SAE Straight), and BSPP male threads with gasket protect against leaks.

For technical drawings and 3-D models, click on a part number.

These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.

Fittings that swivel until tightened rotate 360° for easy installation.

Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.

For technical drawings and 3-D models, click on a part number.

Connect these fittings to rubber or plastic garden hose for a variety of water supply applications.

Brass fittings have good corrosion resistance and are softer than other metal fittings, so they’re easier to thread together. Male BSPP and male metric fittings have a Buna-N washer to ensure a strong seal and resist grease, hydraulic and motor oil, mild chemicals, and water.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these inserts have good corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. Inserts may be mildly magnetic. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole.

For technical drawings and 3-D models, click on a part number.

A black-phosphate finish provides mild corrosion resistance. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts. Use them to repair or change threads in soft metals such as aluminum. They’re comparable to Keensert® inserts. Installation requires a drill bit, a standard tap, an installation tool, and a hammer.

Choose inserts with a thick wall for greater strength than thin-wall inserts, or to fill a large hole with stripped threads.

For technical drawings and 3-D models, click on a part number.