We will reply to your message within an hour.
More
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.
Precisely align, level, and adjust spacing on fasteners and shafts with these shims.
Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.
Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.
For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.
These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.
Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.
Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.
Slide these shims under the screw head to shorten the shoulder length.
Spin these shims onto screw threads to extend the shoulder length.
Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.
Use these round shims as they are, or punch out the middle to create the ID you need.
The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.
Send us a drawing, and we'll cut your custom shim.
Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
18-8 stainless steel threaded rods have good chemical resistance.
Available in metric sizes, these 18-8 stainless steel threaded rods have good chemical resistance.
Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion.
Grade B8 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges. They have good chemical resistance.
More corrosion resistant than 18-8 and 410 stainless steel threaded rods, these 316 stainless steel rods have excellent resistance to chemicals and salt water.
These metric 316 stainless steel threaded rods are more corrosion resistant than 18-8 and 410 stainless steel threaded rods and have excellent resistance to chemicals and salt water.
Grade B8M threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
These hardened 316 stainless steel threaded rods are 40% stronger than standard Grade B8M threaded rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.
Ideal for environments that require frequent cleaning, such as food and pharmaceutical manufacturing, these rods have a removable cover that protects their threads from dirt and grime.
Cut this stock to length to create the machine key you need. Straight keys, with a square or rectangular cross section, are the most common type of key. Install in a keyway to transmit torque from shafts to gears and other components.
When a keyway is damaged, cut a new, wider one. This key stock is stepped to match repaired keyways in shafts or gears. Cut it to length to create the machine key you need.
Straight keys, with a square or rectangular cross section, are the most common type of key. Install them in keyways to transmit torque from shafts to gears and other components.
When installed, these keys fill oval keyways completely, reducing stress on the key and shaft. The rounded ends make it easy to slide gears, hubs, and other components into place. These are also known as feather keys.
Woodruff keys work well near shaft shoulders and on tapered shafts. These keys have a rounded shape that makes them easy to remove when parts need to be taken apart frequently. Use them in light duty applications to connect gears and other components to shafts. Also known as half moon keys.
Create a custom shim to fit your application.
A rounded bottom allows these keys to rock in their seat to relieve stress on the shaft caused by vibration or misalignment.
Make a key that is the exact length you need. Because this key stock is slightly larger than standard key stock, keys will fit tightly in worn keyways.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
This material has tighter tolerances than standard 304 stainless steel.
Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.
When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.
Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.
This wire bounces back after bending. It’s often used to construct springs and wire rope.
Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.
Compare the appearance choices of our 304 stainless steel with these convenient selector packs.
The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.
This material has tighter tolerances than standard 303 stainless steel.
Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.
This material is precision ground to offer tighter tolerances than standard 316 stainless steel.
One side of these sheets is polished to either a brushed or mirror-like finish.
These rods have been passivated for enhanced corrosion resistance.
Bend this wire and it will stay in place. It's widely used as tying and locking wire.
This wire will spring back after bending. It's often used to make springs and wire rope.
This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.
Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.
The titanium content of 321 stainless steel preserves corrosion resistance around weld points.
Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.
309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.
Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.
Designed for use with right-hand, externally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.
Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension.
Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages.
Close off openings in structures while allowing air to pass through.