Center-Locating Punch Sets for Unthreaded Holes
Inch (28-Punch Set)
Inch (33-Punch Set)
Metric (25-Punch Set)
Letter (26-Punch Set)
Wire Gauge (60-Punch Set)
Fit these through existing holes and mark the center of the hole in a second workpiece.
| Number of Pieces | Includes | Tolerance Rating | Lg. | Punch Material | Grip Texture | Container Type | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
| 28 | Punches with 3/32" to 1/2" (in 1/64ths increments), 17/32" Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 0000000 |
| 33 | Punches with 1/2" to 1" (in 1/64ths increments) Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Metric | ||||||||
| 25 | Punches with 1 to 13 mm (in 0.5 mm increments) Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
| 25 | Punches with 13 to 25 mm (in 0.5 mm increments) Point Dia. | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Letter | ||||||||
| 26 | Punches with A to Z Letters | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Wire Gauge | ||||||||
| 60 | Punches with 60 to 1 Wire Gauge Sizes | Undersized | 5" | Steel | Smooth | Metal Stand | 0000000 | 000000 |
Expandable Center-Locating Punch Sets for Unthreaded Holes
Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size; strike it with a hammer to mark the center.
Material | |||||||
|---|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Handle | Punch | Grip Texture | Container Type | Each | |
| 3 | One punch for 1/4"-5/16", 6-8mm diameter (3 3/4" length) One punch for 5/16"-7/16", 8-11mm diameter (4 1/8" length) One punch for 7/16-5/8", 11-16mm diameter (4 1/2" length) | Steel | Steel | Knurled | Plastic Case | 0000000 | 0000000 |
Center-Locating Punch Sets for Unthreaded Closed-End Holes
66-Punch Set
108-Punch Set
Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole. Once the punch is fitted in a hole, place your workpiece against the punch and strike with a hammer to make an indentation.
Center-Locating Punch Sets for Threaded Holes
Also known as transfer screws, these punches can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole. Place your workpiece against the punch and strike it with a hammer to mark the hole location.
| Number of Pieces | Includes | Punch Material | Grip Texture | Container Type | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
| 16 | Handle, Four punches each in the following sizes: 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14 | Steel | Smooth | Plastic Case | 0000000 | 000000 |
| 16 | Handle, Four punches each in the following sizes: 4-40, 6-32, 8-32, 10-24 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
| 16 | Handle, Four punches each in the following sizes: 1/2"-13, 9/16"-12, 5/8"-11, 3/4"-10 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
Metric | ||||||
| 16 | Handle, Four punches each in the following sizes: M3, M4, M5, M6 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
| 16 | Handle, Four punches each in the following sizes: M14, M16, M20, M24 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
| 16 | Handle, Four punches each in the following sizes: M6, M8, M10, M12 | Steel | Smooth | Plastic Case | 0000000 | 00000 |
Self-Aligning Center-Locating Punch Sets for Threaded Holes
Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Thread the punches into closed-end holes and tighten with pliers or a wrench, then strike the workpiece with a hammer to mark the holes.
| Number of Pieces | Includes | Shoulder Ht. | Punch Material | Grip Texture | Each | |
| 12 | Four punches each in the following sizes: 10-24, 10-32, 1/4"-20 | 0.02" | Steel | Smooth | 0000000 | 000000 |
| 12 | Four punches each in the following sizes: 1/4"-20, 5/16"-18, 3/8"-16 | 0.02" | Steel | Smooth | 0000000 | 00000 |
| 12 | Four punches each in the following sizes: 1/2"-13, 5/8"-11, 3/4"-10 | 0.02" | Steel | Smooth | 0000000 | 00000 |
| 12 | Four punches each in the following sizes: 7/16"-14, 1/2"-13, 5/8"-11 | 0.02" | Steel | Smooth | 0000000 | 00000 |
| 12 | Four punches each in the following sizes: 5/16"-18, 3/8"-16, 1/2"-13 | 0.02" | Steel | Smooth | 0000000 | 00000 |
Marking Punch Sets
4-Punch Set
5-Punch Set
7-Punch Set
Also known as center punches, strike these with a hammer to mark hole centers in metal and other materials. Use before drilling to prevent your drill bit from wandering when starting a hole.
Material | |||||||
|---|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Handle | Punch | Handle Shape | Grip Texture | Each | |
| 4 | Punches with 3/16", 5/16", 5/64", and 1/8" Point Dia. | Steel | Steel | Hex | Smooth | 0000000 | 000000 |
| 5 | Punches with 3/32", 5/32", 3/16", 5/16", 3/8" Point Dia. | Steel | Steel | Hex | Smooth | 0000000 | 00000 |
| 7 | Punches with 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4" Point Dia. | Steel | Steel | Hex | Smooth | 0000000 | 00000 |
Starrett Marking Punch Sets
5-Punch Set
7-Punch Set
Also known as center punches, strike these with a hammer to mark hole centers in metal and other materials. Use before drilling to prevent your drill bit from wandering when starting a hole.
Material | ||||||||
|---|---|---|---|---|---|---|---|---|
| Number of Pieces | Includes | Manufacturer Model Number | Handle | Punch | Handle Shape | Grip Texture | Each | |
| 5 | Punches with 1/16", 5/64", 3/32", 1/8", 5/32" Point Dia. | S117PC | Steel | Steel | Round | Knurled | 00000000 | 000000 |
| 7 | Punches with 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4" Point Dia. | S264WB | Steel | Steel | Square | Knurled | 00000000 | 000000 |
Easy-View Marking Punches
Punch has two viewing lenses, one with circle and dot and one with cross hair. These lenses enable you to pinpoint the location where you need to punch. Replace the lens with one of the two included punches and strike it with a hammer to mark the hole center.
Body | Material | |||||||
|---|---|---|---|---|---|---|---|---|
| Point Dia. | Ht. | Dia. | Punch | Holder | Handle Shape | Features | Each | |
| 1/64" | 1" | 1 7/8" | Steel | Aluminum | Round | Slip-Resistant Base | 0000000 | 000000 |
Scriber, Punch, Magnet, and Ruler Set
Scriber has a retractable tip that stays inside the handle for protection when it’s not in use. A knurled grip on the handle ensures a secure hold.
Magnet retrieves ferrous particles from hard-to-reach places.
Scriber | Punch | Ruler | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Tip Material | Tip Style | Type | Point Material | Point Dia. | Punch Lg. | Magnet Lg. | Lg. | Material | Front Graduation Marks (Numeric Increments) | Each | |
For Alloy Steel, Ceramics, Glass, Stainless Steel, Steel, Tool Steel | ||||||||||||
| 5 5/16" | Carbide | Straight | Center | Steel | 1/8" | 5 3/4" | 5 1/2"-23 1/2" | 6" | Stainless Steel | 32nds (4/32"), 64ths (8/64") | 0000000 | 000000 |
Punch and Chisel Sets
8-Piece Set
11-Piece Set
14-Piece Set
24-Piece Set in Wood Stand
24-Piece Set in Pouch
| No. of Pieces | Includes | Material | Container Type | Each | |
| 8 | 3/16" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (4 3/4" O'all Lg.) 3/16" Point Dia. Pin-Removal Punch (5 1/4" O'all Lg.) 1/4" Point Dia. Pin-Removal Punch (5 3/4" O'all Lg.) 3/8" Point Dia. Center-Marking Punch (5" O'all Lg.) 3/8" Wd. Metal-Cutting-Chisel (5 1/2" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) | Steel | Pouch | 0000000 | 000000 |
| 11 | 3/32" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/8" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 5/32" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/16" Point Dia. Pin-Removal Punch (4" O'all Lg.) 3/32" Point Dia. Pin-Removal Punch (4 1/2" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (4 3/4" O'all Lg.) 5/16" Point Dia. Center-Marking Punch (4 1/2" O'all Lg.) 1/4" Point Dia. Fine-Center-Marking Punch (4" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (5" O'all Lg.) 5/16" Wd. Metal-Cutting Chisel (4 3/4" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) | Steel | Pouch | 0000000 | 00000 |
| 14 | 1/8" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 3/32" Point Dia. Pin-Removal Punch (4 1/2" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (4 3/4" O'all Lg.) 5/32" Point Dia. Pin-Removal Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Removal Punch (5 1/4" O'all Lg.) 1/4" Point Dia. Pin-Removal Punch (5 3/4" O'all Lg.) 3/8" Point Dia. Center-Marking Punch (5" O'all Lg.) 1/8" Point Dia. Alignment Punch (8" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (5" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 3/4" Wd. Metal-Cutting Chisel (7" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) | Steel | Pouch | 000000 | 000000 |
| 24 | 1/8" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/4" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 3/32" Point Dia. Pin-Removal Punch (4 1/2" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (4 3/4" O'all Lg.) 5/32" Point Dia. Pin-Removal Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Removal Punch (5 1/4" O'all Lg.) 7/32" Point Dia. Pin-Removal Punch (5 1/2" O'all Lg.) 1/4" Point Dia. Pin-Removal Punch (5 3/4" O'all Lg.) 3/8" Point Dia. Center-Marking Punch (5" O'all Lg.) 1/2" Point Dia. Center-Marking Punch (6" O'all Lg.) 3/8" Point Dia. Fine-Center-Marking Punch (5" O'all Lg.) 1/2" Point Dia. Fine-Center-Marking Punch (6" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (5" O'all Lg.) 5/16" Wd. Metal-Cutting Chisel (4 3/4" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 3/4" Wd. Metal-Cutting Chisel (7" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) 1/4" Wd. Slot-Cutting Chisel (5 5/8" O'all Lg.) 3/8" Wd. Slot-Cutting Chisel (7" O'all Lg.) 1/4" Wd. Half-Round-Nose Chisel (5 3/4" O'all Lg.) 1/4" Wd. Diamond-Point Chisel (5 3/4" O'all Lg.) 3/4" Wd. Rivet-Buster Chisel (6 1/4" O'all Lg.) | Steel | Wood Stand | 0000000 | 000000 |
| 24 | 3/32" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/8" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 5/32" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/4" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 5/16" Point Dia. Pin-Loosening Punch (6" O'all Lg.) 3/32" Point Dia. Pin-Removal Punch (4 1/2" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (4 3/4" O'all Lg.) 5/32" Point Dia. Pin-Removal Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Removal Punch (5 1/4" O'all Lg.) 1/4" Point Dia. Pin-Removal Punch (5 3/4" O'all Lg.) 5/16" Point Dia. Pin-Removal Punch (6" O'all Lg.) 3/8" Point Dia. Center-Marking Punch (5" O'all Lg.) 1/2" Point Dia. Center-Marking Punch (6" O'all Lg.) 5/16" Point Dia. Fine-Center-Marking Punch (4 1/2" O'all Lg.) 1/4" Wd. Metal-Cutting Chisel (5" O'all Lg.) 5/16" Wd. Metal-Cutting Chisel (4 3/4" O'all Lg.) 3/8" Wd. Metal-Cutting Chisel (5 1/4" O'all Lg.) 1/2" Wd. Metal-Cutting Chisel (6" O'all Lg.) 3/4" Wd. Metal-Cutting Chisel (7" O'all Lg.) 5/8" Wd. Metal-Cutting Chisel (6 1/2" O'all Lg.) 1/4" Wd. Slot-Cutting Chisel (5 5/8" O'all Lg.) 1/4" Wd. Half-Round-Nose Chisel (5 3/4" O'all Lg.) 1/4" Wd. Diamond-Point Chisel (5 3/4" O'all Lg.) | Steel | Pouch | 000000 | 000000 |
Punch Sets
10-Piece Set with Fine
Center-Marking
Punch
Center-Marking
Punch
10 Piece-Set
24-Piece Set in Wood Stand
Sets contain everything you need for marking, loosening, and removing pins.
| No. of Pieces | Includes | Material | Container Type | Each | |
| 10 | 3/32" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 1/16" Point Dia. Pin-Removal Punch (4" O'all Lg.) 3/32" Point Dia. Pin-Removal Punch (4 1/2" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (4 3/4" O'all Lg.) 5/32" Point Dia. Pin-Removal Punch (5" O'all Lg.) 3/16" Point Dia. Pin-Removal Punch (5 1/4" O'all Lg.) 3/32" Point Dia. Fine-Center-Marking Punch (4" O'all Lg.) 5/64" Point Dia. Center-Marking Punch (4" O'all Lg.) 3/32" Point Dia. Center-Marking Punch (4" O'all Lg.) 5/64" Point Dia. Pin-Removal Punch (4-1/4" O'all Lg.) | Steel | Pouch | 0000000 | 000000 |
| 10 | 1/8" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 3/32" Point Dia. Pin-Removal Punch (6" O'all Lg.) 1/8" Point Dia. Pin-Removal Punch (6" O'all Lg.) 5/32" Point Dia. Pin-Removal Punch (6" O'all Lg.) 3/16" Point Dia. Pin-Removal Punch (6" O'all Lg.) 7/32" Point Dia. Pin-Removal Punch (6" O'all Lg.) 1/4" Point Dia. Pin-Removal Punch (6" O'all Lg.) 5/16" Point Dia. Pin-Removal Punch (8" O'all Lg.) 3/8" Point Dia. Pin-Removal Punch (8" O'all Lg.) 5/16" Point Dia. Center-Marking Punch (4 1/2" O'all Lg.) | Steel | Pouch | 0000000 | 00000 |
| 24 | Two 3/16" Point Dia. Center-Marking Punches (5" O'all Lg.) Two 5/16" Point Dia. Center-Marking Punches (6" O'all Lg.) Two 5/32" Point Dia. Fine-Center-Marking Punches (5" O'all Lg.) Two 1/8" Point Dia. Pin-Loosening Punches (5" O'all Lg.) Two 5/32" Point Dia. Pin-Loosening Punches (5" O'all Lg.) Two 3/16" Point Dia. Pin-Loosening Punches (5" O'all Lg.) 1/4" Point Dia. Pin-Loosening Punch (5" O'all Lg.) 5/16" Point Dia. Pin-Loosening Punch (6" O'all Lg.) Two 3/32" Point Dia. Pin-Removal Punches (4 1/2" O'all Lg.) Two 1/8" Point Dia. Pin-Removal Punches (4 3/4" O'all Lg.) Two 5/32" Point Dia. Pin-Removal Punches (5" O'all Lg.) Two 3/16" Point Dia. Pin-Removal Punches (5 1/4" O'all Lg.) 1/4" Point Dia. Pin-Removal Punch (5 3/4" O'all Lg.) 5/16" Point Dia. Pin-Removal Punch (6" O'all Lg.) | Steel | Wood Stand | 0000000 | 000000 |